This patch brings the SMDK2410 port in sync with the latest U-Boot version by doing the following: - do the necessary adjustments to support the ARM relocation feature - use the CFI flash driver (and removing the old one) - remove the unneeded config.mk file
Signed-off-by: David Müller <d.muel...@elsoft.ch> diff --git a/board/samsung/smdk2410/Makefile b/board/samsung/smdk2410/Makefile index bda8898..0afe1e2 100644 --- a/board/samsung/smdk2410/Makefile +++ b/board/samsung/smdk2410/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := smdk2410.o flash.o +COBJS := smdk2410.o SOBJS := lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/samsung/smdk2410/config.mk b/board/samsung/smdk2410/config.mk deleted file mode 100644 index c8d1b1f..0000000 --- a/board/samsung/smdk2410/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <ga...@denx.de> -# David Mueller, ELSOFT AG, <d.muel...@elsoft.ch> -# -# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu -# -# see http://www.samsung.com/ for more information on SAMSUNG -# - -# -# SMDK2410 has 1 bank of 64 MB DRAM -# -# 3000'0000 to 3400'0000 -# -# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -# optionally with a ramdisk at 3080'0000 -# -# we load ourself to 33F8'0000 -# -# download area is 3300'0000 -# - - -CONFIG_SYS_TEXT_BASE = 0x33F80000 diff --git a/board/samsung/smdk2410/flash.c b/board/samsung/smdk2410/flash.c deleted file mode 100644 index 132d752..0000000 --- a/board/samsung/smdk2410/flash.c +++ /dev/null @@ -1,433 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <a...@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -ulong myflush (void); - - -#define FLASH_BANK_SIZE PHYS_FLASH_SIZE -#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -#define CMD_READ_ARRAY 0x000000F0 -#define CMD_UNLOCK1 0x000000AA -#define CMD_UNLOCK2 0x00000055 -#define CMD_ERASE_SETUP 0x00000080 -#define CMD_ERASE_CONFIRM 0x00000030 -#define CMD_PROGRAM 0x000000A0 -#define CMD_UNLOCK_BYPASS 0x00000020 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1))) - -#define BIT_ERASE_DONE 0x00000080 -#define BIT_RDY_MASK 0x00000080 -#define BIT_PROGRAM_ERROR 0x00000020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - -/*----------------------------------------------------------------------- - */ - -ulong flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = -#if defined(CONFIG_AMD_LV400) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV400B & FLASH_TYPEMASK); -#elif defined(CONFIG_AMD_LV800) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV800B & FLASH_TYPEMASK); -#else -#error "Unknown flash configured" -#endif - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) { - if (j <= 3) { - /* 1st one is 16 KB */ - if (j == 0) { - flash_info[i].start[j] = - flashbase + 0; - } - - /* 2nd and 3rd are both 8 KB */ - if ((j == 1) || (j == 2)) { - flash_info[i].start[j] = - flashbase + 0x4000 + (j - - 1) * - 0x2000; - } - - /* 4th 32 KB */ - if (j == 3) { - flash_info[i].start[j] = - flashbase + 0x8000; - } - } else { - flash_info[i].start[j] = - flashbase + (j - 3) * MAIN_SECT_SIZE; - } - } - size += flash_info[i].size; - } - - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (AMD_MANUFACT & FLASH_VENDMASK): - printf ("AMD: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (AMD_ID_LV400B & FLASH_TYPEMASK): - printf ("1x Amd29LV400BB (4Mbit)\n"); - break; - case (AMD_ID_LV800B & FLASH_TYPEMASK): - printf ("1x Amd29LV800BB (8Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - - Done:; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ushort result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - if (info->protect[sect] == 0) { /* not protected */ - vu_short *addr = (vu_short *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer_masked () > - CONFIG_SYS_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip = TMO; - break; - } - - if (!chip - && (result & 0xFFFF) & BIT_ERASE_DONE) - chip = READY; - - if (!chip - && (result & 0xFFFF) & BIT_PROGRAM_ERROR) - chip = ERR; - - } while (!chip); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - - outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_hword (flash_info_t * info, ulong dest, ushort data) -{ - vu_short *addr = (vu_short *) dest; - ushort result; - int rc = ERR_OK; - int cflag, iflag; - int chip; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; - *addr = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - /* wait until flash is ready */ - chip = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { - chip = ERR | TMO; - break; - } - if (!chip && ((result & 0x80) == (data & 0x80))) - chip = READY; - - if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { - result = *addr; - - if ((result & 0x80) == (data & 0x80)) - chip = READY; - else - chip = ERR; - } - - } while (!chip); - - *addr = CMD_READ_ARRAY; - - if (chip == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - int l; - int i, rc; - ushort data; - - wp = (addr & ~1); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - for (; i < 2 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - if ((rc = write_hword (info, wp, data)) != 0) { - return (rc); - } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - data = *((vu_short *) src); - if ((rc = write_hword (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - return write_hword (info, wp, data); -} diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c index 76a24bb..e9ba922 100644 --- a/board/samsung/smdk2410/smdk2410.c +++ b/board/samsung/smdk2410/smdk2410.c @@ -3,7 +3,7 @@ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Marius Groeger <mgroe...@sysgo.de> * - * (C) Copyright 2002 + * (C) Copyright 2002, 2010 * David Mueller, ELSOFT AG, <d.muel...@elsoft.ch> * * See file CREDITS for list of people who contributed to this @@ -27,6 +27,7 @@ #include <common.h> #include <netdev.h> +#include <asm/io.h> #include <asm/arch/s3c24x0_cpu.h> DECLARE_GLOBAL_DATA_PTR; @@ -55,7 +56,7 @@ DECLARE_GLOBAL_DATA_PTR; #define U_M_SDIV 0x2 #endif -static inline void delay (unsigned long loops) +static inline void pll_delay(unsigned long loops) { __asm__ volatile ("1:\n" "subs %0, %1, #1\n" @@ -66,44 +67,51 @@ static inline void delay (unsigned long loops) * Miscellaneous platform dependent initialisations */ -int board_init (void) +int board_early_init_f(void) { struct s3c24x0_clock_power * const clk_power = s3c24x0_get_base_clock_power(); struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->locktime = 0xFFFFFF; + writel(0xFFFFFF, &clk_power->locktime); /* configure MPLL */ - clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + writel((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV, + &clk_power->mpllcon); /* some delay between MPLL and UPLL */ - delay (4000); + pll_delay(4000); /* configure UPLL */ - clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + writel((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV, + &clk_power->upllcon); /* some delay between MPLL and UPLL */ - delay (8000); + pll_delay(8000); /* set up the I/O ports */ - gpio->gpacon = 0x007FFFFF; - gpio->gpbcon = 0x00044555; - gpio->gpbup = 0x000007FF; - gpio->gpccon = 0xAAAAAAAA; - gpio->gpcup = 0x0000FFFF; - gpio->gpdcon = 0xAAAAAAAA; - gpio->gpdup = 0x0000FFFF; - gpio->gpecon = 0xAAAAAAAA; - gpio->gpeup = 0x0000FFFF; - gpio->gpfcon = 0x000055AA; - gpio->gpfup = 0x000000FF; - gpio->gpgcon = 0xFF95FFBA; - gpio->gpgup = 0x0000FFFF; - gpio->gphcon = 0x002AFAAA; - gpio->gphup = 0x000007FF; + writel(0x007FFFFF, &gpio->gpacon); + writel(0x00044555, &gpio->gpbcon); + writel(0x000007FF, &gpio->gpbup); + writel(0xAAAAAAAA, &gpio->gpccon); + writel(0x0000FFFF, &gpio->gpcup); + writel(0xAAAAAAAA, &gpio->gpdcon); + writel(0x0000FFFF, &gpio->gpdup); + writel(0xAAAAAAAA, &gpio->gpecon); + writel(0x0000FFFF, &gpio->gpeup); + writel(0x000055AA, &gpio->gpfcon); + writel(0x000000FF, &gpio->gpfup); + writel(0xFF95FFBA, &gpio->gpgcon); + writel(0x0000FFFF, &gpio->gpgup); + writel(0x002AFAAA, &gpio->gphcon); + writel(0x000007FF, &gpio->gphup); + + return 0; +} +int board_init(void) +{ /* arch number of SMDK2410-Board */ gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; @@ -116,11 +124,10 @@ int board_init (void) return 0; } -int dram_init (void) +int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = PHYS_SDRAM_1_SIZE; return 0; } @@ -134,3 +141,15 @@ int board_eth_init(bd_t *bis) return rc; } #endif + +/* + * Hardcoded flash setup: + * Flash 0 is a non-CFI AMD AM29LV800BB flash. + */ +ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) +{ + info->portwidth = FLASH_CFI_16BIT; + info->chipwidth = FLASH_CFI_BY16; + info->interface = FLASH_CFI_X16; + return 1; +} diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 62fe97e..aa59d75 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -33,22 +33,23 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ -#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ -#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ +#define CONFIG_ARM920T /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_SMDK2410 /* on a SAMSUNG SMDK2410 Board */ -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ +#define CONFIG_SYS_TEXT_BASE 0x0 +#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH -#define USE_920T_MMU 1 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +/* input clock of PLL (the SMDK2410 has 12MHz input clock) */ +#define CONFIG_SYS_CLK_FREQ 12000000 -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG /* * Hardware drivers @@ -62,19 +63,24 @@ * select serial console configuration */ #define CONFIG_S3C24X0_SERIAL -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ + +/************************************************************ + * USB support (currently only works with D-cache off) + ************************************************************/ +#define CONFIG_USB_OHCI +#define CONFIG_USB_KEYBOARD +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION /************************************************************ * RTC ************************************************************/ -#define CONFIG_RTC_S3C24X0 1 +#define CONFIG_RTC_S3C24X0 -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE #define CONFIG_BAUDRATE 115200 - /* * BOOTP options */ @@ -83,52 +89,70 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #include <config_cmd_default.h> +#define CONFIG_CMD_BSP #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF - - -#define CONFIG_BOOTDELAY 3 -/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ -/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */ -#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_USB + +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING + +/* autoboot */ +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOT_RETRY_TIME -1 +#define CONFIG_RESET_TO_RETRY +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 10.0.0.110 #define CONFIG_SERVERIP 10.0.0.1 -/*#define CONFIG_BOOTFILE "elinos-lart" */ -/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ #if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SMDK2410 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "SMDK2410 # " +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ -#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ -#define CONFIG_SYS_LOAD_ADDR 0x33000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x30800000 #define CONFIG_SYS_HZ 1000 /* valid baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/* support additional compression methods */ +#define CONFIG_BZIP2 +#define CONFIG_LZO +#define CONFIG_LZMA + /*----------------------------------------------------------------------- * Stack sizes * @@ -143,40 +167,73 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #0 */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -#if 0 -#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -#endif +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_FLASH_LEGACY_512Kx16 +#define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#ifdef CONFIG_AMD_LV800 -#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */ -#endif -#ifdef CONFIG_AMD_LV400 -#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */ -#endif +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_MAX_FLASH_SECT (19) + +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SIZE 0x10000 +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ +/* + * Size of malloc() pool + * BZIP2 / LZO / LZMA need a lot of RAM + */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ +#define CONFIG_SYS_MONITOR_LEN (448 * 1024) +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +/* + * NAND configuration + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_S3C2410 +#define CONFIG_SYS_S3C2410_NAND_HWECC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_BASE 0x4E000000 +#endif + +/* + * File system + */ +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_YAFFS2 +#define CONFIG_RBTREE + +/* additions for new relocation code, must be added to all boards */ +#undef CONFIG_SYS_ARM_WITHOUT_RELOC +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_BOARD_EARLY_INIT_F #endif /* __CONFIG_H */
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
