On 11/16/22 15:11, Ashok Reddy Soma wrote:
Add new configuration files and device trees for quad and octal spi flash
mini u-boot. With these configs's mini u-boot will run from on chip
memory(OCM) and uses DCC terminal for console output.
Changes in v3:
- Added dts files for qspi mini configuration
- Added CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000
to fix compilation error.
- Add dts files for octal flash mini u-boot.
- Add below configs to fix compilation error.
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xFFFE0000
Changes in v2:
- Removed configs/xilinx_* from MAINTAINERS as, it is already taken care.
- Run savedefconfig and updated mini config to align with latest Kconfig
layout
- Run savedefconfig and updated mini config for ospi to align with
latest Kconfig layout
Ashok Reddy Soma (3):
arm64: versal: Add qspi flash mini u-boot configuration
spi: cadence-qspi: Fix compilation error in mini u-boot flash reset
arm64: versal: Add octal spi flash mini u-boot configuration
arch/arm/dts/Makefile | 2 +
arch/arm/dts/versal-mini-ospi-single.dts | 16 +++++
arch/arm/dts/versal-mini-ospi.dtsi | 77 +++++++++++++++++++++++
arch/arm/dts/versal-mini-qspi-single.dts | 16 +++++
arch/arm/dts/versal-mini-qspi.dtsi | 72 +++++++++++++++++++++
configs/xilinx_versal_mini_ospi_defconfig | 72 +++++++++++++++++++++
configs/xilinx_versal_mini_qspi_defconfig | 75 ++++++++++++++++++++++
drivers/spi/cadence_ospi_versal.c | 4 +-
8 files changed, 332 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/dts/versal-mini-ospi-single.dts
create mode 100644 arch/arm/dts/versal-mini-ospi.dtsi
create mode 100644 arch/arm/dts/versal-mini-qspi-single.dts
create mode 100644 arch/arm/dts/versal-mini-qspi.dtsi
create mode 100644 configs/xilinx_versal_mini_ospi_defconfig
create mode 100644 configs/xilinx_versal_mini_qspi_defconfig
Applied.
M
