Hi Wolfgang, > Dear Heiko Schocher, > > In message <4d2d7122.60...@denx.de> you wrote: >> >> > Global question: do we really need an CONFIG_DIGSY_REV5? Is there not >> > a way to determine the revision by probing the hardware? For example, >> > the RTC's show up at different addresses on the bus - but ther emight >> > be even easier ways? >> >> Good question ... as I know, there is no possibility to detect the >> hardware on an other way then over the RTC ... and I don;t want to >> go this way ... what if the RTC is not responding? > > Maybe you can ask the hardware guys again?
We did this and we are sure that there is no better way. Cheers Detlev -- When you loosen yourself from all the obvious delusions - religion, ideology, Communism - you're still left with the myth of your own goodness. Which is the final delusion. -- Philip Roth -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot