Perform a simple rename of CONFIG_POWER_PFUZE100_I2C_ADDR to 
CFG_POWER_PFUZE100_I2C_ADDR

Signed-off-by: Tom Rini <tr...@konsulko.com>
---
 board/gateworks/gw_ventana/gw_ventana_spl.c | 4 ++--
 drivers/power/pmic/pmic_pfuze100.c          | 2 +-
 include/configs/el6x_common.h               | 2 +-
 include/configs/gw_ventana.h                | 2 +-
 include/configs/imx8mq_evk.h                | 2 +-
 include/configs/kontron_pitx_imx8m.h        | 2 +-
 include/configs/mx6sabreauto.h              | 2 +-
 include/configs/mx6sabresd.h                | 2 +-
 include/configs/novena.h                    | 2 +-
 include/configs/tqma6.h                     | 2 +-
 include/configs/vining_2000.h               | 2 +-
 11 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c 
b/board/gateworks/gw_ventana/gw_ventana_spl.c
index 6ad994af1c64..2f046c9c0b3e 100644
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -791,8 +791,8 @@ void setup_pmic(void)
        i2c_set_bus_num(i2c_pmic);
 
        /* configure PFUZE100 PMIC */
-       if (!i2c_probe(CONFIG_POWER_PFUZE100_I2C_ADDR)) {
-               debug("probed PFUZE100@0x%x\n", CONFIG_POWER_PFUZE100_I2C_ADDR);
+       if (!i2c_probe(CFG_POWER_PFUZE100_I2C_ADDR)) {
+               debug("probed PFUZE100@0x%x\n", CFG_POWER_PFUZE100_I2C_ADDR);
                power_pfuze100_init(i2c_pmic);
                p = pmic_get("PFUZE100");
                if (p && !pmic_probe(p)) {
diff --git a/drivers/power/pmic/pmic_pfuze100.c 
b/drivers/power/pmic/pmic_pfuze100.c
index c646a0c31f82..5115b55e49dc 100644
--- a/drivers/power/pmic/pmic_pfuze100.c
+++ b/drivers/power/pmic/pmic_pfuze100.c
@@ -23,7 +23,7 @@ int power_pfuze100_init(unsigned char bus)
        p->name = name;
        p->interface = PMIC_I2C;
        p->number_of_regs = PFUZE100_NUM_OF_REGS;
-       p->hw.i2c.addr = CONFIG_POWER_PFUZE100_I2C_ADDR;
+       p->hw.i2c.addr = CFG_POWER_PFUZE100_I2C_ADDR;
        p->hw.i2c.tx_num = 1;
        p->bus = bus;
 
diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h
index 6913a91c4c19..78af42d04504 100644
--- a/include/configs/el6x_common.h
+++ b/include/configs/el6x_common.h
@@ -17,7 +17,7 @@
 #define CFG_SYS_FSL_USDHC_NUM  2
 
 /* PMIC */
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CFG_POWER_PFUZE100_I2C_ADDR    0x08
 
 /* Commands */
 
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 85a2ad21dc03..ebc5d03d0d5c 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -30,7 +30,7 @@
 /*
  * PMIC
  */
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CFG_POWER_PFUZE100_I2C_ADDR    0x08
 #define CFG_POWER_LTC3676_I2C_ADDR  0x3c
 
 /* Various command support */
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index a7a51907f5c9..d2de2900c063 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -18,7 +18,7 @@
 #define CFG_MALLOC_F_ADDR              0x182000
 /* For RAW image gives a error info not panic */
 
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CFG_POWER_PFUZE100_I2C_ADDR 0x08
 #endif
 
 /* ENET Config */
diff --git a/include/configs/kontron_pitx_imx8m.h 
b/include/configs/kontron_pitx_imx8m.h
index bf590efb4348..e3a021c987c6 100644
--- a/include/configs/kontron_pitx_imx8m.h
+++ b/include/configs/kontron_pitx_imx8m.h
@@ -20,7 +20,7 @@
 /* For RAW image gives a error info not panic */
 
 
-#define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
+#define CFG_POWER_PFUZE100_I2C_ADDR  0x08
 #endif
 
 /* ENET1 Config */
diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index da98139d7d77..05ae2fce1fd7 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -36,6 +36,6 @@
 /* DMA stuff, needed for GPMI/MXS NAND support */
 
 /* PMIC */
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CFG_POWER_PFUZE100_I2C_ADDR    0x08
 
 #endif                         /* __MX6SABREAUTO_CONFIG_H */
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 1aa8a56cceb6..30d3b9d93074 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -25,7 +25,7 @@
 #endif
 
 /* PMIC */
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CFG_POWER_PFUZE100_I2C_ADDR    0x08
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
diff --git a/include/configs/novena.h b/include/configs/novena.h
index 5e8b7fa62170..39d3afd1c8ee 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -46,7 +46,7 @@
 #endif
 
 /* PMIC */
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CFG_POWER_PFUZE100_I2C_ADDR    0x08
 
 /* UART */
 #define CFG_MXC_UART_BASE              UART2_BASE
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index af5a474cf31e..8c75a75a9e59 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -31,7 +31,7 @@
 #define CFG_I2C_MULTI_BUS
 
 #if !defined(CONFIG_DM_PMIC)
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CFG_POWER_PFUZE100_I2C_ADDR    0x08
 #define TQMA6_PFUZE100_I2C_BUS         2
 #endif
 
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index 7bfc22c043fe..30654191a264 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -31,7 +31,7 @@
 #define CFG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR
 
 /* PMIC */
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CFG_POWER_PFUZE100_I2C_ADDR    0x08
 
 /* Network */
 #define CFG_FEC_MXC_PHYADDR          0x0
-- 
2.25.1

Reply via email to