> On Wed, Dec 07, 2022 at 02:27:37PM +0000, Holger Brunck wrote: > > > > - migrate all boards to environment.txt files > > > > - migrate PPC boards to DM_I2C > > > > - some cleanup > > > > > > > > Holger Brunck (7): > > > > board/km: move ls102xa boards to environment text files > > > > km/powerpc: migrate to env.txt file > > > > board/km/cent2: migrate to environment text file > > > > board/km/secu: migrate to use environment text files > > > > board/km: remove obsolete ARCH_KIRKWOOD > > > > km/ppc: migrate all mpc83xx to DM_I2C > > > > km/mpc8360: remove unused CONFIG_SYS_PAXE defines > > > > > > Thanks for doing this. As this is the first in my mind big > > > environment conversion, do you have any further feedback on the > > > mechanism, things that would make this easier / more useful, etc? > > > > > > > it was quite straight forward and especially for board series which > > use a hierarchical structure as we do it is easy to use and afterwards > > much easier to read and to maintain. > > > > I only struggled about the strings I had defined in Kconfig as > > discussed in another thread about double quoted strings. I removed them > from there in the end. > > > > What would maybe be helpful to have a small script which converts the > > generated include/generated/environment.h into a textfile which then > > looks like the environment in your u-boot if you dump it. Then you can > > quickly do a diff between a dump from your old and your textfile to > > see if your newly migrated environment is identical. > > Ah good. Perhaps > https://patchwork.ozlabs.org/project/uboot/patch/20221128084122.3456680 > -2-max.oss...@gmail.com/ > and some documentation / guide around that would help then? >
yes this would have been helpful for me. Best regards Holger