Enable USB and RESET functionality. In order for USB to work properly on SAMA7, the driver needs to be able to have access to PHY's, which, in turn, need to have access to the RSTC driver's assert/deassert functionalities.
Signed-off-by: Sergiu Moga <sergiu.m...@microchip.com> Tested-by: Mihai Sain <mihai.s...@microchip.com> --- v1 -> v4: - No change configs/sama7g5ek_mmc1_defconfig | 10 ++++++++++ configs/sama7g5ek_mmc_defconfig | 10 ++++++++++ 2 files changed, 20 insertions(+) diff --git a/configs/sama7g5ek_mmc1_defconfig b/configs/sama7g5ek_mmc1_defconfig index f004e44803..6c92781e60 100644 --- a/configs/sama7g5ek_mmc1_defconfig +++ b/configs/sama7g5ek_mmc1_defconfig @@ -38,6 +38,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -68,8 +69,12 @@ CONFIG_MMC_SDHCI_ATMEL=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_MACB=y +CONFIG_PHY=y +CONFIG_PHY_MICROCHIP_SAMA7_USB=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91PIO4=y +CONFIG_DM_RESET=y +CONFIG_RESET_AT91=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y @@ -77,5 +82,10 @@ CONFIG_SYSRESET=y CONFIG_SYSRESET_AT91=y CONFIG_TIMER=y CONFIG_MCHP_PIT64B_TIMER=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ATMEL=y +CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT_OVERLAY=y # CONFIG_EFI_LOADER_HII is not set diff --git a/configs/sama7g5ek_mmc_defconfig b/configs/sama7g5ek_mmc_defconfig index 5b42fc63f3..a4e57c7ba5 100644 --- a/configs/sama7g5ek_mmc_defconfig +++ b/configs/sama7g5ek_mmc_defconfig @@ -38,6 +38,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -68,8 +69,12 @@ CONFIG_MMC_SDHCI_ATMEL=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_MACB=y +CONFIG_PHY=y +CONFIG_PHY_MICROCHIP_SAMA7_USB=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91PIO4=y +CONFIG_DM_RESET=y +CONFIG_RESET_AT91=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y @@ -77,5 +82,10 @@ CONFIG_SYSRESET=y CONFIG_SYSRESET_AT91=y CONFIG_TIMER=y CONFIG_MCHP_PIT64B_TIMER=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ATMEL=y +CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT_OVERLAY=y # CONFIG_EFI_LOADER_HII is not set -- 2.34.1
