Add the required pinctrl and gpio properties required by the USB DT
nodes of the sam9x60ek boards.
Signed-off-by: Sergiu Moga <sergiu.m...@microchip.com>
---
v1 -> v2:
- this patch was not here, previously split from 1/6 of v1
arch/arm/dts/sam9x60ek.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/dts/sam9x60ek.dts b/arch/arm/dts/sam9x60ek.dts
index 1a02e2cb79..45e2f4cc40 100644
--- a/arch/arm/dts/sam9x60ek.dts
+++ b/arch/arm/dts/sam9x60ek.dts
@@ -139,6 +139,13 @@
<AT91_PIOD 14 AT91_PERIPH_GPIO
AT91_PINCTRL_PULL_UP>;
};
+ usb1 {
+ pinctrl_usb_default: usb_default {
+ atmel,pins = <AT91_PIOD 15
AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 16
AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
};
};
};
@@ -213,3 +220,17 @@
phy-mode = "rmii";
status = "okay";
};
+
+&usb1 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioD 15 GPIO_ACTIVE_HIGH
+ &pioD 16 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
--
2.34.1
