On 1/3/23 13:11, sergiu.m...@microchip.com wrote:
On 03.01.2023 01:26, Marek Vasut wrote:
On 12/23/22 13:34, Sergiu Moga wrote:
[...]
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 9b955c1bd6..9ae55c6e5d 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -5,6 +5,9 @@
*/
#include <common.h>
+
+#if !(CONFIG_IS_ENABLED(DM_USB))
+
#include <asm/arch/clk.h>
int usb_cpu_init(void)
@@ -62,3 +65,183 @@ int usb_cpu_init_fail(void)
{
return usb_cpu_stop();
}
Would it be possible to just remove the non-DM functionality ?
Unfortunately, the other older boards would not build and work anymore
if I were to remove this.
Any chance they can be converted to DM ?
+#elif CONFIG_IS_ENABLED(DM_GPIO)
I think you want plain '#else' here, and then make the driver select
DM_GPIO in case DM_USB is enabled in Kconfig entry.
+#include <clk.h>
+#include <dm.h>
+#include <asm/gpio.h>
+#include <usb.h>
+#include "ohci.h"
+
+#define AT91_MAX_USBH_PORTS 3
+#define at91_for_each_port(index) \
+ for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
+
+struct at91_usbh_data {
+ enum usb_init_type init_type;
+ struct gpio_desc vbus_pin[AT91_MAX_USBH_PORTS];
drivers/usb/host/ehci-generic.c: ret =
device_get_supply_regulator(dev, "vbus-supply",
I wonder if we can instead use regulator for vbus-supply here too ?
I would rather keep the same DT properties as those in Linux and have
them be in concordance with our USB DT binding, which specifies the
atmel,vbus-gpio property and no vbus-supply.
Oh well, so yes, we're stuck with this GPIO stuff.
[...]
