When fit image boots from ram, the payload will be prepared in the address of SPL_LOAD_FIT_ADDRESS. In spl fit generic flow, it will malloc another memory address and copy whole fit image to this malloc address. But it is un-necessary for booting from RAM.
This patch improves this flow by declare the board_spl_fit_buffer_addr() to replace the original one. The larger image size (eq: Kernel Image 10~20MB), it can save more booting time. Signed-off-by: Rick Chen <r...@andestech.com> --- Changes in v3 - fix aligment - refine board_spl_fit_buffer_addr --- arch/riscv/cpu/ax25/Makefile | 1 + arch/riscv/cpu/ax25/spl.c | 27 +++++++++++++++++++++++++++ 2 files changed, 28 insertions(+) create mode 100644 arch/riscv/cpu/ax25/spl.c diff --git a/arch/riscv/cpu/ax25/Makefile b/arch/riscv/cpu/ax25/Makefile index 318baccb09..35a1a2fb83 100644 --- a/arch/riscv/cpu/ax25/Makefile +++ b/arch/riscv/cpu/ax25/Makefile @@ -5,3 +5,4 @@ obj-y := cpu.o obj-y += cache.o +obj-y += spl.o diff --git a/arch/riscv/cpu/ax25/spl.c b/arch/riscv/cpu/ax25/spl.c new file mode 100644 index 0000000000..413849043b --- /dev/null +++ b/arch/riscv/cpu/ax25/spl.c @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Andes Technology Corporation + * Rick Chen, Andes Technology Corporation <r...@andestech.com> + */ +#include <common.h> +#include <cpu_func.h> +#include <hang.h> +#include <init.h> +#include <log.h> +#include <spl.h> +#include <asm/global_data.h> +#include <asm/system.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if CONFIG_IS_ENABLED(RAM_SUPPORT) +struct legacy_img_hdr *spl_get_load_buffer(ssize_t offset, size_t size) +{ + return (void *)(CONFIG_SPL_LOAD_FIT_ADDRESS + offset); +} + +void *board_spl_fit_buffer_addr(ulong fit_size, int sectors, int bl_len) +{ + return spl_get_load_buffer(0, sectors * bl_len); +} +#endif -- 2.17.1