Hi, Stefano, 2011/1/14 Stefano Babic <sba...@denx.de>: > The patch adds suupport for the Freescale's mx35pdk board > (known as well as mx35_3stack). > > The board boots from the NOR flash. Following devices > are supported: > - two ethernet devices (FEC and SMC911x on debug board) > - I2C > - PMIC (MC13892) via I2C interface > - UART > - NOR flash (64MB) > - NAND flash (2GB) > - basic access to mc9sdz60 registers via I2C interface > > Signed-off-by: Stefano Babic <sba...@denx.de> > --- > MAINTAINERS | 1 + > MAKEALL | 1 + > arch/arm/include/asm/arch-mx35/mmu.h | 172 --------------
You want to remove this file, is there this file in the mainline? > board/freescale/mx35pdk/Makefile | 49 ++++ > board/freescale/mx35pdk/config.mk | 25 ++ > board/freescale/mx35pdk/imximage.cfg | 62 +++++ > board/freescale/mx35pdk/lowlevel_init.S | 382 > +++++++++++++++++++++++++++++++ > board/freescale/mx35pdk/mx35pdk.c | 313 +++++++++++++++++++++++++ > board/freescale/mx35pdk/mx35pdk.h | 101 ++++++++ > boards.cfg | 1 + > doc/README.mx35pdk | 185 +++++++++++++++ > include/configs/mx35pdk.h | 269 ++++++++++++++++++++++ > 12 files changed, 1389 insertions(+), 172 deletions(-) > delete mode 100644 arch/arm/include/asm/arch-mx35/mmu.h > create mode 100644 board/freescale/mx35pdk/Makefile > create mode 100644 board/freescale/mx35pdk/config.mk > create mode 100644 board/freescale/mx35pdk/imximage.cfg > create mode 100644 board/freescale/mx35pdk/lowlevel_init.S > create mode 100644 board/freescale/mx35pdk/mx35pdk.c > create mode 100644 board/freescale/mx35pdk/mx35pdk.h > create mode 100644 doc/README.mx35pdk > create mode 100644 include/configs/mx35pdk.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index d7cd09c..3abb4cb 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -554,6 +554,7 @@ Stefano Babic <sba...@denx.de> > ea20 davinci > polaris xscale > trizepsiv xscale > + mx35pdk i.MX35 > mx51evk i.MX51 > vision2 i.MX51 > > diff --git a/MAKEALL b/MAKEALL > index a732e6a..31dbfe1 100755 > --- a/MAKEALL > +++ b/MAKEALL > @@ -409,6 +409,7 @@ LIST_ARM11=" \ > mx31ads \ > mx31pdk \ > mx31pdk_nand \ > + mx35pdk \ > qong \ > smdk6400 \ > tnetv107x_evm \ > diff --git a/arch/arm/include/asm/arch-mx35/mmu.h > b/arch/arm/include/asm/arch-mx35/mmu.h > deleted file mode 100644 > index 1b15dba..0000000 > --- a/arch/arm/include/asm/arch-mx35/mmu.h > +++ /dev/null > @@ -1,172 +0,0 @@ > -/* > - * Copyright 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. > - */ > - Ditto, [snip] > diff --git a/board/freescale/mx35pdk/config.mk > b/board/freescale/mx35pdk/config.mk > new file mode 100644 > index 0000000..3db1c85 > --- /dev/null > +++ b/board/freescale/mx35pdk/config.mk > @@ -0,0 +1,25 @@ > +# > +# (C) Copyright 2010 > +# Stefano Babic DENX Software Engineering sba...@denx.de. > +# > +# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. > +# > +# See file CREDITS for list of people who contributed to this > +# project. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation; either version 2 of > +# the License, or (at your option) any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, > +# MA 02111-1307 USA > +# > +CONFIG_SYS_TEXT_BASE = 0xA0000000 Need move this config to board config file and remove this file. [snip] > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot