On Monday 17 January 2011 19:08:01 Fabio Giovagnini wrote: > Hi All this is what I do: > 1) I run u-Boot getting this output: > U-Boot 2010.12-09860-g9cb5761-dirty (Jan 17 2011 - 18:05:12) > > CPU: SH2A > BOARD: MLCD7203 > DRAM: 64MB > *** Warning - bad CRC, using default environment > > Destroy Hash Table: 0c7d6df8 table = (null) > Create Hash Table: N=72 > INSERT: table 0c7d6df8, filled 1/73 rv 0c780144 ==> name="bootargs" > value="console=ttySC0,115200" > INSERT: table 0c7d6df8, filled 2/73 rv 0c780324 ==> name="baudrate" > value="115200" > INSERT: table 0c7d6df8, filled 3/73 rv 0c7800cc ==> name="loadaddr" > value="0x0C200000" > INSERT: free(data = 0c77ffb8) > INSERT: done > fwc addr 20000000 cmd f0 00f0 16bit x 16 bit > fwc addr 2000aaaa cmd aa 00aa 16bit x 16 bit > fwc addr 20005554 cmd 55 0055 16bit x 16 bit > fwc addr 2000aaaa cmd 90 0090 16bit x 16 bit > fwc addr 20000000 cmd f0 00f0 16bit x 16 bit > JEDEC PROBE: ID bf 236c 0 > Found JEDEC Flash: SST 39VF6402B > unlock address index 1 > unlock addresses are 0x555/0x2aa > erase_region_count = 128 erase_region_size = 65536 > flash_protect ON: from 0x20000000 to 0x2001FFFF > protect on 0 > protect on 1 > flash_protect ON: from 0x20020000 to 0x2002FFFF > protect on 2 > FLASH: 8MB > In: serial > Out: serial > Err: serial > => > > > 2) I load my uImage getting this output from iminfo: > => loady > ## Ready for binary (ymodem) download to 0x0C200000 at 115200 bps... > Code, 7627(SOH)/0(STX)/0(CAN) packets, 4 retries > ## Total Size = 0x000ee445 = 975941 Bytes > => iminfo > > ## Checking Image at 0c200000 ... > Legacy image found > Image Name: Linux-2.6.37+ > Image Type: SuperH Linux Kernel Image (gzip compressed) > Data Size: 975877 Bytes = 953 KiB > Load Address: 0c001000 > Entry Point: 0c002000 > Verifying Checksum ... OK > => > > > Any ideas about why the kernelò do not send out anything?
this is the result of bootm * kernel: default image load address = 0x0c200000 ## Booting kernel from Legacy Image at 0c200000 ... Image Name: Linux-2.6.37+ Image Type: SuperH Linux Kernel Image (gzip compressed) Data Size: 975877 Bytes = 953 KiB Load Address: 0c001000 Entry Point: 0c002000 Verifying Checksum ... OK kernel data at 0x0c200040, len = 0x000ee405 (975877) ## No init Ramdisk ramdisk start = 0x00000000, ramdisk end = 0x00000000 Uncompressing Kernel Image ... OK kernel loaded at 0x0c001000, end = 0x0c1af9fc -- Ing. Fabio Giovagnini Aurion s.r.l. P.I e C.F. 00885711200 skype: aurion.giovagnini Tel. +39.051.594.78.24 Fax. +39.051.082.14.49 Cell. +39.335.83.50.919 www.aurion-tech.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot