Add the required pinctrl and gpio properties needed by the USB DT nodes
of the sam9x60_curiosity boards.
Signed-off-by: Sergiu Moga <sergiu.m...@microchip.com>
---
v1 -> v2:
- this patch was not here, previously split from 1/6 of v1
v2 -> v3:
- nothing
arch/arm/dts/at91-sam9x60_curiosity.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/dts/at91-sam9x60_curiosity.dts
b/arch/arm/dts/at91-sam9x60_curiosity.dts
index 7c5b6ae2b8..d6ae3d648d 100644
--- a/arch/arm/dts/at91-sam9x60_curiosity.dts
+++ b/arch/arm/dts/at91-sam9x60_curiosity.dts
@@ -49,6 +49,13 @@
atmel,pins =
<AT91_PIOD 14
AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
};
+
+ usb1 {
+ pinctrl_usb_default:
usb_default {
+ atmel,pins = <AT91_PIOD
15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+
AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
};
};
};
@@ -89,3 +96,17 @@
phy-mode = "rmii";
status = "okay";
};
+
+&usb1 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioD 15 GPIO_ACTIVE_HIGH
+ &pioD 18 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
--
2.34.1
