On Thu, Jan 05, 2023 at 14:25, Dario Binacchi <dario.binac...@amarulasolutions.com> wrote:
> Hi Mattijs, > > On Thu, Jan 5, 2023 at 12:03 PM Mattijs Korpershoek > <mkorpersh...@baylibre.com> wrote: >> >> On Thu, Jan 05, 2023 at 10:10, Dario Binacchi >> <dario.binac...@amarulasolutions.com> wrote: >> >> > Hi Mattijs, >> > >> > On Thu, Jan 5, 2023 at 10:06 AM Mattijs Korpershoek >> > <mkorpersh...@baylibre.com> wrote: >> >> >> >> On Wed, Jan 04, 2023 at 17:46, Dario Binacchi >> >> <dario.binac...@amarulasolutions.com> wrote: >> >> >> >> > The patch fixes the following error when updating a BSH SMM S2 board: >> >> > 3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb >> >> > ${filesize} >> >> > 3:72>Okay (0.023s) >> >> > 3:72>Start Cmd:FB: reboot >> >> > 3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s) >> >> > >> >> > The "fastboot reboot" command detaches the USB when it still needs to be >> >> > used. So let's detach the USB just before the reset. >> >> > >> >> > CC: Mattijs Korpershoek <mkorpersh...@baylibre.com> >> >> > Fixes: 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot >> >> > commands") >> >> > Suggested-by: Michael Trimarchi <mich...@amarulasolutions.com> >> >> > Signed-off-by: Dario Binacchi <dario.binac...@amarulasolutions.com> >> >> >> >> Hi Dario, >> >> >> >> Thank you for your patch and for reporting the problem. >> >> >> >> Unfortunately, applying it seems to break the problem I tried to >> >> solve with 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot >> >> commands") >> >> >> >> Does reverting 5f7e01e9d5d800 also solves your issue? >> > >> > Yes >> > >> >> >> >> I'll spend some time on this. >> > >> > Ok, thanks. So we can test on our hardware. >> >> So historically, I wanted to make this a "arch specific fix, as >> discussed in >> https://lore.kernel.org/u-boot/20220728-reset-usb-controller-v2-0-ef7657ce7...@baylibre.com/ >> >> To me, the problem with calling g_dnl_trigger_detach() in the >> fastboot_func->in_req->complete() handler is that it's called too late. >> >> In fact, the main fastboot loop is as following: >> >> while (1) { >> if (g_dnl_detach()) >> break; >> if (ctrlc()) >> break; >> schedule(); >> usb_gadget_handle_interrupts(controller_index); >> } >> ret = CMD_RET_SUCCESS; >> >> exit: >> usb_gadget_release(controller_index); >> g_dnl_unregister(); >> g_dnl_clear_detach(); >> >> return ret; >> >> usb_gadget_handle_interrupts, will at some point, call complete() which will >> call compl_do_reset(). >> But in compl_do_reset(), we already reset the board >> (without going through the exit: section from cmd/fastboot.c) >> >> For the BSH SMM S2 board, since it's being updated with uuu, >> I assume that the host PC also triggers a call of acmd_complete() afterwards? >> >> Can you try the following diff as well, on top of your change? (for testing >> purposes) >> >> --- a/drivers/usb/gadget/f_fastboot.c >> +++ b/drivers/usb/gadget/f_fastboot.c >> @@ -492,7 +492,7 @@ static void do_bootm_on_complete(struct usb_ep *ep, >> struct usb_request *req) >> >> static void compl_do_reset(struct usb_ep *ep, struct usb_request *req) >> { >> - do_exit_on_complete(ep, req); >> + usb_gadget_release(0); >> do_reset(NULL, 0, 0, NULL); >> } >> >> I suspect this will also break your flashing. > > No, I am able to flash and reset the board. > This change works. With some additional testing on my end, I can see that the final message (sending OKAY to the host) done on fastboot_func->in_ep is not done on my end. I think I am lucky that my controller driver (dwc2_udc_otg) delivers the message to my host anyways and calls done() even when messages are aborted. I think I have something that might be better. Dario, could you do another test for me, please? 1. Revert 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands") 2. Apply the following diff: diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index d0e92c7a071f..f4311328a2da 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -421,6 +421,7 @@ static int fastboot_tx_write_str(const char *buffer) static void compl_do_reset(struct usb_ep *ep, struct usb_request *req) { + g_dnl_unregister(); do_reset(NULL, 0, 0, NULL); } The call to g_dnl_unregister() will end up calling g_dnl_unbind() which calls usb_gadget_disconnect() where each controller can implement a soft disconnect (which I can do for dwc2_udc_otg) > >> >> > Regards Dario >> > >> >> >> >> > >> >> > --- >> >> > >> >> > Changes in v2: >> >> > - Add 'Suggested-by' tag. >> >> > >> >> > drivers/usb/gadget/f_fastboot.c | 12 ++++++------ >> >> > 1 file changed, 6 insertions(+), 6 deletions(-) >> >> > >> >> > diff --git a/drivers/usb/gadget/f_fastboot.c >> >> > b/drivers/usb/gadget/f_fastboot.c >> >> > index 07b1681c8a9a..0b3fae564d0a 100644 >> >> > --- a/drivers/usb/gadget/f_fastboot.c >> >> > +++ b/drivers/usb/gadget/f_fastboot.c >> >> > @@ -419,11 +419,6 @@ static int fastboot_tx_write_str(const char >> >> > *buffer) >> >> > return fastboot_tx_write(buffer, strlen(buffer)); >> >> > } >> >> > >> >> > -static void compl_do_reset(struct usb_ep *ep, struct usb_request *req) >> >> > -{ >> >> > - do_reset(NULL, 0, 0, NULL); >> >> > -} >> >> > - >> >> > static unsigned int rx_bytes_expected(struct usb_ep *ep) >> >> > { >> >> > int rx_remain = fastboot_data_remaining(); >> >> > @@ -495,6 +490,12 @@ static void do_bootm_on_complete(struct usb_ep >> >> > *ep, struct usb_request *req) >> >> > do_exit_on_complete(ep, req); >> >> > } >> >> > >> >> > +static void compl_do_reset(struct usb_ep *ep, struct usb_request *req) >> >> > +{ >> >> > + do_exit_on_complete(ep, req); >> >> > + do_reset(NULL, 0, 0, NULL); >> >> > +} >> >> > + >> >> > #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT) >> >> > static void do_acmd_complete(struct usb_ep *ep, struct usb_request >> >> > *req) >> >> > { >> >> > @@ -544,7 +545,6 @@ static void rx_handler_command(struct usb_ep *ep, >> >> > struct usb_request *req) >> >> > case FASTBOOT_COMMAND_REBOOT_FASTBOOTD: >> >> > case FASTBOOT_COMMAND_REBOOT_RECOVERY: >> >> > fastboot_func->in_req->complete = compl_do_reset; >> >> > - g_dnl_trigger_detach(); >> >> > break; >> >> > #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT) >> >> > case FASTBOOT_COMMAND_ACMD: >> >> > -- >> >> > 2.32.0 >> > >> > >> > >> > -- >> > >> > Dario Binacchi >> > >> > Senior Embedded Linux Developer >> > >> > dario.binac...@amarulasolutions.com >> > >> > __________________________________ >> > >> > >> > Amarula Solutions SRL >> > >> > Via Le Canevare 30, 31100 Treviso, Veneto, IT >> > >> > T. +39 042 243 5310 >> > i...@amarulasolutions.com >> > >> > www.amarulasolutions.com > > > > -- > > Dario Binacchi > > Senior Embedded Linux Developer > > dario.binac...@amarulasolutions.com > > __________________________________ > > > Amarula Solutions SRL > > Via Le Canevare 30, 31100 Treviso, Veneto, IT > > T. +39 042 243 5310 > i...@amarulasolutions.com > > www.amarulasolutions.com