On Tue, Jan 10, 2023 at 18:29, Tom Rini <tr...@konsulko.com> wrote:
> On Wed, Jan 11, 2023 at 12:10:42AM +0100, Joost van Zwieten wrote:
> >
> >
> > On Tue, Jan 10, 2023 at 18:08, Tom Rini <tr...@konsulko.com>
wrote:
> > > On Wed, Jan 11, 2023 at 12:01:46AM +0100, Joost van Zwieten
wrote:
> > > >
> > > >
> > > > On Tue, Jan 10, 2023 at 13:41, Tom Rini
<tr...@konsulko.com>
> > wrote:
> > > > > On Tue, Jan 10, 2023 at 09:13:32AM +0100, Joost van
Zwieten
> > wrote:
> > > > >
> > > > > > Dear maintainers,
> > > > > >
> > > > > > As of commit 4963f63fe61f15329d77472a762b1d8bf754d24b
> > U-Boot
> > > > fails
> > > > > > to start
> > > > > > a kernel (with `bootz`) on my Odroid U2 unless I
force
> > > > > > `initrd_high`, e.g.
> > > > > > to `0x50000000`. With commit 4963f63f and
`initrd_high`
> > > > *unset* I
> > > > > > get the
> > > > > > following output:
> > > > > >
> > > > > > U-Boot 2020.10-rc2-00314-g4963f63fe6 (Jan 09 2023
-
> > 23:59:31
> > > > > > +0100)
> > > > > >
> > > > > > CPU: Exynos4412 @ 1 GHz
> > > > > > Model: Odroid based on Exynos4412
> > > > > > Type: u3
> > > > > > DRAM: 2 GiB
> > > > > > LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> > > > > > LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> > > > > > LDO21@TFLASH_2.8V: set 2800000 uV; enabling
> > > > > > MMC: SAMSUNG SDHCI: 2, EXYNOS DWMMC: 0
> > > > > > Loading Environment from MMC... *** Warning - bad
CRC,
> > using
> > > > > > default
> > > > > > environment
> > > > > >
> > > > > > In: serial
> > > > > > Out: serial
> > > > > > Err: serial
> > > > > > Boot device: MMC(2)
> > > > > > Net: No ethernet found.
> > > > > > Hit any key to stop autoboot: 0
> > > > > > Odroid # env set fk_kvers 5.10.0-20-armmp
> > > > > > Odroid # load mmc ${mmcbootdev}:${mmcbootpart}
> > ${fdt_addr_r}
> > > > > > /boot/dtbs/${fk_kvers}/exynos4412-odroidu3.dtb
> > > > > > 53440 bytes read in 50 ms (1 MiB/s)
> > > > > > Odroid # load mmc ${mmcbootdev}:${mmcbootpart}
> > > > ${kernel_addr_r}
> > > > > > /boot/vmlinuz-${fk_kvers}
> > > > > > 4973056 bytes read in 182 ms (26.1 MiB/s)
> > > > > > Odroid # load mmc ${mmcbootdev}:${mmcbootpart}
> > > > ${ramdisk_addr_r}
> > > > > > /boot/initrd.img-${fk_kvers}
> > > > > > 22231585 bytes read in 777 ms (27.3 MiB/s)
> > > > > > Odroid # env set bootargs console=ttySAC1,115200n8
> > > > > > Odroid # bootz ${kernel_addr_r}
> > > > ${ramdisk_addr_r}:${filesize}
> > > > > > ${fdt_addr_r}
> > > > > > Kernel image @ 0x41000000 [ 0x000000 - 0x4be200 ]
> > > > > > ## Flattened Device Tree blob at 40800000
> > > > > > Booting using the fdt blob at 0x40800000
> > > > > > Loading Ramdisk to b9947000, end bae7aa21 ...
OK
> > > > > > Loading Device Tree to b9936000, end b99460bf
... OK
> > > > > >
> > > > > > Starting kernel ...
> > > > > >
> > > > > > And that's all I ever see. Normally the initrd loads
a
> > module
> > > > that
> > > > > > causes an
> > > > > > LED on the Odroid to blink, and this is not happening
> > either,
> > > > so
> > > > > > I'm pretty
> > > > > > confident the kernel doesn't start or at least
crashes
> > before
> > > > > > producing
> > > > > > output. If I set `initrd_high` to `0x50000000` (or
> > something
> > > > in the
> > > > > > neighborhood) the kernel starts just fine:
> > > > > >
> > > > > > U-Boot 2020.10-rc2-00314-g4963f63fe6 (Jan 09 2023
-
> > 23:59:31
> > > > > > +0100)
> > > > > >
> > > > > > CPU: Exynos4412 @ 1 GHz
> > > > > > Model: Odroid based on Exynos4412
> > > > > > Type: u3
> > > > > > DRAM: 2 GiB
> > > > > > LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> > > > > > LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> > > > > > LDO21@TFLASH_2.8V: set 2800000 uV; enabling
> > > > > > MMC: SAMSUNG SDHCI: 2, EXYNOS DWMMC: 0
> > > > > > Loading Environment from MMC... *** Warning - bad
CRC,
> > using
> > > > > > default
> > > > > > environment
> > > > > >
> > > > > > In: serial
> > > > > > Out: serial
> > > > > > Err: serial
> > > > > > Boot device: MMC(2)
> > > > > > Net: No ethernet found.
> > > > > > Hit any key to stop autoboot: 0
> > > > > > Odroid # env set fk_kvers 5.10.0-20-armmp
> > > > > > Odroid # load mmc ${mmcbootdev}:${mmcbootpart}
> > ${fdt_addr_r}
> > > > > > /boot/dtbs/${fk_kvers}/exynos4412-odroidu3.dtb
> > > > > > 53440 bytes read in 49 ms (1 MiB/s)
> > > > > > Odroid # load mmc ${mmcbootdev}:${mmcbootpart}
> > > > ${kernel_addr_r}
> > > > > > /boot/vmlinuz-${fk_kvers}
> > > > > > 4973056 bytes read in 181 ms (26.2 MiB/s)
> > > > > > Odroid # load mmc ${mmcbootdev}:${mmcbootpart}
> > > > ${ramdisk_addr_r}
> > > > > > /boot/initrd.img-${fk_kvers}
> > > > > > 22231585 bytes read in 777 ms (27.3 MiB/s)
> > > > > > Odroid # env set bootargs console=ttySAC1,115200n8
> > > > > > Odroid # env set initrd_high 0x50000000
> > > > > > Odroid # bootz ${kernel_addr_r}
> > > > ${ramdisk_addr_r}:${filesize}
> > > > > > ${fdt_addr_r}
> > > > > > Kernel image @ 0x41000000 [ 0x000000 - 0x4be200 ]
> > > > > > ## Flattened Device Tree blob at 40800000
> > > > > > Booting using the fdt blob at 0x40800000
> > > > > > Loading Ramdisk to 4eacc000, end 4ffffa21 ...
OK
> > > > > > Loading Device Tree to bae6a000, end bae7a0bf
... OK
> > > > > >
> > > > > > Starting kernel ...
> > > > > >
> > > > > > [ 0.000000] Booting Linux on physical CPU 0xa00
> > > > > > <truncated>
> > > > > >
> > > > > > The difference between those two runs is the location
> > where
> > > > U-Boot
> > > > > > loads the
> > > > > > initrd. The parent commit of 4963f63f boots fine
without
> > > > setting
> > > > > > `initrd_high`:
> > > > > >
> > > > > > U-Boot 2020.10-rc2-00313-gdfaf6a5797 (Jan 10 2023
-
> > 00:13:19
> > > > > > +0100)
> > > > > >
> > > > > > CPU: Exynos4412 @ 1 GHz
> > > > > > Model: Odroid based on Exynos4412
> > > > > > Type: u3
> > > > > > DRAM: 2 GiB
> > > > > > LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling
> > > > > > LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling
> > > > > > LDO21@TFLASH_2.8V: set 2800000 uV; enabling
> > > > > > MMC: SAMSUNG SDHCI: 2, EXYNOS DWMMC: 0
> > > > > > Loading Environment from MMC... *** Warning - bad
CRC,
> > using
> > > > > > default
> > > > > > environment
> > > > > >
> > > > > > In: serial
> > > > > > Out: serial
> > > > > > Err: serial
> > > > > > Boot device: MMC(2)
> > > > > > Net: No ethernet found.
> > > > > > Hit any key to stop autoboot: 0
> > > > > > Odroid # env set fk_kvers 5.10.0-20-armmp
> > > > > > Odroid # load mmc ${mmcbootdev}:${mmcbootpart}
> > ${fdt_addr_r}
> > > > > > /boot/dtbs/${fk_kvers}/exynos4412-odroidu3.dtb
> > > > > > 53440 bytes read in 49 ms (1 MiB/s)
> > > > > > Odroid # load mmc ${mmcbootdev}:${mmcbootpart}
> > > > ${kernel_addr_r}
> > > > > > /boot/vmlinuz-${fk_kvers}
> > > > > > 4973056 bytes read in 181 ms (26.2 MiB/s)
> > > > > > Odroid # load mmc ${mmcbootdev}:${mmcbootpart}
> > > > ${ramdisk_addr_r}
> > > > > > /boot/initrd.img-${fk_kvers}
> > > > > > 22231585 bytes read in 776 ms (27.3 MiB/s)
> > > > > > Odroid # env set bootargs console=ttySAC1,115200n8
> > > > > > Odroid # bootz ${kernel_addr_r}
> > > > ${ramdisk_addr_r}:${filesize}
> > > > > > ${fdt_addr_r}
> > > > > > Kernel image @ 0x41000000 [ 0x000000 - 0x4be200 ]
> > > > > > ## Flattened Device Tree blob at 40800000
> > > > > > Booting using the fdt blob at 0x40800000
> > > > > > Loading Ramdisk to 4eacc000, end 4ffffa21 ...
OK
> > > > > > Loading Device Tree to 4eabb000, end 4eacb0bf
... OK
> > > > > >
> > > > > > Starting kernel ...
> > > > > >
> > > > > > [ 0.000000] Booting Linux on physical CPU 0xa00
> > > > > > <truncated>
> > > > > >
> > > > > > I've tested two different kernels from Debian
(buster and
> > > > bullseye)
> > > > > > and both
> > > > > > have the same problem. I'm building U-Boot using the
> > default
> > > > config
> > > > > > for
> > > > > > board `odroid` and boot the Odroid from an SD card
with
> > > > firmware
> > > > > > (`bl1`,
> > > > > > `bl2` and `tzsw`) from Hardkernel's clone of the
u-boot
> > > > repository
> > > > > > [1].
> > > > > > There are no peripherals connected apart from the SD
card
> > and
> > > > the
> > > > > > serial
> > > > > > console. Please let me know if you need more
information.
> > > > >
> > > > > Interesting. So what does "bdi" show, both in the older
good
> > and
> > > > > then current tree? Specifically the information about
where
> > DRAM
> > > > is, and
> > > > > how large it is? Thanks.
> > > > >
> > > > > --
> > > > > Tom
> > > >
> > > > Both 4963f63f (not working) and its parent (working)
produce
> > the
> > > > same
> > > > output:
> > > >
> > > > boot_params = 0x40000100
> > > > DRAM bank = 0x00000000
> > > > -> start = 0x40000000
> > > > -> size = 0x10000000
> > > > DRAM bank = 0x00000001
> > > > -> start = 0x50000000
> > > > -> size = 0x10000000
> > > > DRAM bank = 0x00000002
> > > > -> start = 0x60000000
> > > > -> size = 0x10000000
> > > > DRAM bank = 0x00000003
> > > > -> start = 0x70000000
> > > > -> size = 0x10000000
> > > > DRAM bank = 0x00000004
> > > > -> start = 0x80000000
> > > > -> size = 0x10000000
> > > > DRAM bank = 0x00000005
> > > > -> start = 0x90000000
> > > > -> size = 0x10000000
> > > > DRAM bank = 0x00000006
> > > > -> start = 0xa0000000
> > > > -> size = 0x10000000
> > > > DRAM bank = 0x00000007
> > > > -> start = 0xb0000000
> > > > -> size = 0x0ff00000
> > > > memstart = 0x40000000
> > > > memsize = 0x7ff00000
> > > > flashstart = 0x00000000
> > > > flashsize = 0x00000000
> > > > flashoffset = 0x00000000
> > > > baudrate = 115200 bps
> > > > relocaddr = 0xbfe83000
> > > > reloc off = 0x7c083000
> > > > Build = 32-bit
> > > > current eth = unknown
> > > > ethaddr = (not set)
> > > > IP addr = <NULL>
> > > > fdt_blob = 0xbae7bf00
> > > > new_fdt = 0xbae7bf00
> > > > fdt_size = 0x00002fa0
> > > > lmb_dump_all:
> > > > memory.cnt = 0x1
> > > > memory.size = 0x0
> > > > memory.reg[0x0].base = 0x40000000
> > > > .size = 0x7ff00000
> > > >
> > > > reserved.cnt = 0x1
> > > > reserved.size = 0x0
> > > > reserved.reg[0x0].base = 0xbae7acd0
> > > > .size = 0x5085330
> > > > arch_number = 0x000010c1
> > > > TLB addr = 0xbfef0000
> > > > irq_sp = 0xbae7bef0
> > > > sp start = 0xbae7bee0
> > > > Board Type = 0
> > > > Early malloc usage: f0 / 400
> > > >
> > > > I'm not sure if this is relevant, but with the failing
commit
> > I can
> > > > get the
> > > > kernel to start with `initrd_high` set to `0x70000000` or
> > lower,
> > > > but not
> > > > higher.
> > >
> > > OK, so 8 whole banks, of 256MB each. Does this platform have
2GB
> > of
> > > memory for real?
> > >
> > > --
> > > Tom
> >
> > Yes, it does. See https://www.hardkernel.com/shop/odroid-u3/ .
>
> Thanks. I guess my current thought is that in the absence of
adding
> earlycon to the kernel args, to perhaps get more info out of the
kernel
> as to when / where it's dying, that bootm_size should be set to
> 0x10000000 (256MB) to replicate the old behavior, on this
platform.
> Jaehoon, do you have any other ideas?
>
> --
> Tom
I was not aware of the existence of `earlycon`. Running the first
failing
commit 4963f63f with `earlycon` and with `initrd_high` *unset*
reveals a
kernel panic:
Kernel image @ 0x41000000 [ 0x000000 - 0x4be200 ]
## Flattened Device Tree blob at 40800000
Booting using the fdt blob at 0x40800000
Loading Ramdisk to b9947000, end bae7aa21 ... OK
Loading Device Tree to b9936000, end b99460bf ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0xa00
[ 0.000000] Linux version 5.10.0-20-armmp
(debian-ker...@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1
20210110,
GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.158-2
(2022-12-13)
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0
(ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT
aliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel ODROID-U3
board based
on Exynos4412
[ 0.000000] earlycon: exynos4210 at MMIO 0x13810000 (options
'')
[ 0.000000] printk: bootconsole [exynos4210] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at
0xbf700000,
size 8 MiB
[ 0.000000] OF: reserved mem: initialized node
region_mfc_right,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at
0xbd300000,
size 36 MiB
[ 0.000000] OF: reserved mem: initialized node
region_mfc_left,
compatible id shared-dma-pool
[ 0.000000] cma: Reserved 16 MiB at 0xbc000000
[ 0.000000] Samsung CPU ID: 0xe4412220
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem
0x0000000040000000-0x000000006fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem
0x0000000070000000-0x00000000bd2fffff]
