From: Andrejs Cainikovs <andrejs.cainik...@toradex.com>
Add pinctrl's for high speed eMMC and MMC cards.
Signed-off-by: Andrejs Cainikovs <andrejs.cainik...@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schen...@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolc...@toradex.com>
---
v2: new patch
---
arch/arm/dts/fsl-imx8qm-apalis.dts | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/fsl-imx8qm-apalis.dts
b/arch/arm/dts/fsl-imx8qm-apalis.dts
index 7daa4483d72c..3a3067ffec5b 100644
--- a/arch/arm/dts/fsl-imx8qm-apalis.dts
+++ b/arch/arm/dts/fsl-imx8qm-apalis.dts
@@ -589,8 +589,10 @@
/* eMMC */
&usdhc1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1>;
+ pinctrl-2 = <&pinctrl_usdhc1>;
bus-width = <8>;
non-removable;
status = "okay";
@@ -598,8 +600,10 @@
/* Apalis MMC1 */
&usdhc2 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_mmc1_cd>;
+ pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_mmc1_cd>;
+ pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_mmc1_cd>;
bus-width = <8>;
cd-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */
status = "okay";
--
2.25.1
