Hi Pali, On Fri, Jan 13, 2023 at 5:32 PM Pali Rohár <p...@kernel.org> wrote: > > On Wednesday 11 January 2023 21:56:41 Pali Rohár wrote: > > On Wednesday 11 January 2023 12:44:45 Tony Dinh wrote: > > > Hi Pali, > > > > > > On Wed, Jan 11, 2023 at 12:04 AM Pali Rohár <p...@kernel.org> wrote: > > > > > > > > On Tuesday 10 January 2023 21:07:45 Tony Dinh wrote: > > > > > Hi Pali, > > > > > > > > > > I got burned for being lazy :) it turned out that the mix of #ifdef > > > > > and #if defined was the problem. Just stepped away and came back for a > > > > > few minutes and I can see that I just need to define the CONFIG_DDR4 > > > > > properly in arch/arm/mach-mvebu/Kconfig and build it to pass the > > > > > CONFIG_DDR4 stuff. > > > > > > > > > > One more small hurdle after that was CONFIG_USE_PRIVATE_LIBGCC must be > > > > > undefined for it to build (so I am using > > > > > /usr/lib/gcc/arm-linux-gnueabi/10/libgcc.a, and not using > > > > > arch/arm/lib/lib.a) > > > > > > > > Hello! It is normally a good idea to unset CONFIG_USE_PRIVATE_LIBGCC > > > > unless you have compiled gcc for target CPU. > > > > > > CONFIG_USE_PRIVATE_LIBGCC was set as a default for ARM target, since > > > u-boot has arch/arm/lib/lib.a. But using arch/arm/lib/lib.a I got > > > several build errors like these: > > > > > > ld.bfd: drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.o: in > > > function `mv_ddr4_copt_get': > > > /usr/src/u-boot/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:809: > > > undefined reference to `__aeabi_i2d' > > > ld.bfd: > > > /usr/src/u-boot/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:809: > > > undefined reference to `__aeabi_dmul' > > > ld.bfd: > > > /usr/src/u-boot/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:809: > > > undefined reference to `__aeabi_d2uiz' > > > > This looks like a bug in that training code. I would need to see source > > code, so I can figure out how to fix it. > > Have you solved this issue? Or if not, can you show what you had on that > problematic line 809?
No, I have not and actually have no idea what that code does! And I thought you recognized the error, so I submitted the DDR4 patch so you can compile and see the error. Here is the code snipet, the error is now at 717. # grep -n10 PBS_VALUE_FACTOR /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c 704- u8 copt_val; 705- u8 dq_idx; 706- u8 center_zone_max_low = 0; 707- u8 center_zone_min_high = 128; 708- u8 vw_zone_max_low = 0; 709- u8 vw_zone_min_high = 128; 710- u8 min_vw = 63; /* minimum valid window between all bits */ 711- u8 center_low_el; 712- u8 center_high_el; 713- 714: /* lambda calculated as D * PBS_VALUE_FACTOR / d */ 715- //printf("Copt::Debug::\t"); 716- for (dq_idx = 0; dq_idx < 8; dq_idx++) { 717- center_per_dq[dq_idx] = 0.5 * (vw_h[dq_idx] + vw_l[dq_idx]); 718- vw_per_dq[dq_idx] = 1 + (vw_h[dq_idx] - vw_l[dq_idx]); 719- if (min_vw > vw_per_dq[dq_idx]) 720- min_vw = vw_per_dq[dq_idx]; 721- } 722- 723- /* calculate center zone */ 724- for (dq_idx = 0; dq_idx < 8; dq_idx++) { Here are the build errors with the current code. <BEGIN ERRORS BUILD LOG > rm -f spl/common/spl/built-in.o; ar cDPrsT spl/common/spl/built-in.o spl/common/spl/spl.o spl/common/spl/spl_bootrom.o spl/common/spl/spl_spi.o ( cd spl && ld.bfd -T u-boot-spl.lds --gc-sections -Bstatic --gc-sections --no-dynamic-linker --build-id=none -Ttext 0x40000030 arch/arm/cpu/armv7/start.o --whole-archive arch/arm/mach-mvebu/built-in.o arch/arm/cpu/armv7/built-in.o arch/arm/cpu/built-in.o arch/arm/lib/built-in.o board/thecus/n2350/built-in.o common/spl/built-in.o common/init/built-in.o boot/built-in.o common/built-in.o cmd/built-in.o env/built-in.o lib/built-in.o disk/built-in.o drivers/built-in.o dts/built-in.o fs/built-in.o --no-whole-archive arch/arm/lib/eabi_compat.o arch/arm/lib/lib.a -Map u-boot-spl.map -o u-boot-spl ) ld.bfd: drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.o: in function `mv_ddr4_copt_get': /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:717: undefined reference to `__aeabi_i2d' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:717: undefined reference to `__aeabi_dmul' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:717: undefined reference to `__aeabi_d2uiz' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:757: undefined reference to `__aeabi_i2d' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:757: undefined reference to `__aeabi_i2d' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:757: undefined reference to `__aeabi_dmul' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:757: undefined reference to `__aeabi_i2d' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:757: undefined reference to `__aeabi_dadd' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:757: undefined reference to `__aeabi_dcmpgt' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:758: undefined reference to `__aeabi_dsub' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:758: undefined reference to `__aeabi_d2uiz' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:770: undefined reference to `__aeabi_i2d' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:770: undefined reference to `__aeabi_dadd' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:770: undefined reference to `__aeabi_d2uiz' ld.bfd: drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.o: in function `mv_ddr4_tap_tuning': /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:1124: undefined reference to `__aeabi_ui2d' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:1124: undefined reference to `__aeabi_dmul' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:1124: undefined reference to `__aeabi_dsub' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:1124: undefined reference to `__aeabi_ddiv' ld.bfd: /usr/src/u-boot-master/drivers/ddr/marvell/a38x/mv_ddr4_training_calibration.c:1124: undefined reference to `__aeabi_d2uiz' make[1]: *** [scripts/Makefile.spl:527: spl/u-boot-spl] Error 1 <END ERRORS BUILD LOG > And the config option that's relevant here is CONFIG_USE_PRIVATE_LIBGCC (default is Y) which enabled the usage of arch/arm/lib/lib.a, and caused the build errors. # grep GCC .config CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=100201 CONFIG_HAVE_PRIVATE_LIBGCC=y CONFIG_USE_PRIVATE_LIBGCC=y When I unset CONFIG_USE_PRIVATE_LIBGCC, the GGC library used is /usr/lib/gcc/arm-linux-gnueabi/10 and everything built. # grep CONFIG_USE_PRIVATE_LIBGCC .config # CONFIG_USE_PRIVATE_LIBGCC is not set <BEGIN GOOD BUILD LOG> rm -f spl/common/spl/built-in.o; ar cDPrsT spl/common/spl/built-in.o spl/common/spl/spl.o spl/common/spl/spl_bootrom.o spl/common/spl/spl_spi.o ( cd spl && ld.bfd -T u-boot-spl.lds --gc-sections -Bstatic --gc-sections --no-dynamic-linker --build-id=none -Ttext 0x40000030 arch/arm/cpu/armv7/start.o --whole-archive arch/arm/mach-mvebu/built-in.o arch/arm/cpu/armv7/built-in.o arch/arm/cpu/built-in.o arch/arm/lib/built-in.o board/thecus/n2350/built-in.o common/spl/built-in.o common/init/built-in.o boot/built-in.o common/built-in.o cmd/built-in.o env/built-in.o lib/built-in.o disk/built-in.o drivers/built-in.o dts/built-in.o fs/built-in.o --no-whole-archive arch/arm/lib/eabi_compat.o -L /usr/lib/gcc/arm-linux-gnueabi/10 -lgcc -Map u-boot-spl.map -o u-boot-spl ) ld.bfd: warning: /usr/lib/gcc/arm-linux-gnueabi/10/libgcc.a(_udivmoddi4.o) uses 4-byte wchar_t yet the output is to use 2-byte wchar_t; use of wchar_t values across objects may fail objcopy -j .text -j .secure_text -j .secure_data -j .rodata -j .hash -j .data -j .got -j .got.plt -j __u_boot_list -j .rel.dyn -j .binman_sym_table -j .text_rest -j .dtb.init.rodata -j .efi_runtime -j .efi_runtime_rel -O binary spl/u-boot-spl spl/u-boot-spl-nodtb.bin objdump -t spl/u-boot-spl > spl/u-boot-spl.sym cat spl/u-boot-spl-nodtb.bin spl/u-boot-spl-pad.bin spl/u-boot-spl.dtb > spl/u-boot-spl-dtb.bin cp spl/u-boot-spl-dtb.bin spl/u-boot-spl.bin ./tools/mkimage -n ./arch/arm/mach-mvebu/kwbimage.cfg -T kwbimage -a 0x00800000 -e 0x00800000 -d u-boot.bin u-boot-with-spl.kwb >/dev/null && cat /dev/null ./scripts/check-of.sh .config ./scripts/of_allowlist.txt make: Leaving directory '/usr/src/u-boot-master' + /bin/ls -lh u-boot-with-spl.kwb -rw-r--r-- 1 root root 581K Jan 14 13:12 u-boot-with-spl.kwb <END LOG> I can also send you the whole log if you want. I'm preparing the Thecus N2350 patch and will send it within a few days. Thanks, Tony