This is not used and appears to be associated with the faraday board which
has been removed. Drop the driver and Kconfig options.
Signed-off-by: Simon Glass <s...@chromium.org>
---
drivers/usb/gadget/Makefile | 3 +-
drivers/usb/gadget/fotg210.c | 964 ------------------------------
drivers/usb/gadget/gadget_chips.h | 8 -
include/usb/fotg210.h | 362 -----------
4 files changed, 1 insertion(+), 1336 deletions(-)
delete mode 100644 drivers/usb/gadget/fotg210.c
delete mode 100644 include/usb/fotg210.h
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 9c04403da30..b04b6bcd779 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -19,8 +19,7 @@ obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o
obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o
-obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
-obj-$(CONFIG_USB_GADGET_MAX3420) += max3420_udc.o
+0obj-$(CONFIG_USB_GADGET_MAX3420) += max3420_udc.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o
obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
diff --git a/drivers/usb/gadget/fotg210.c b/drivers/usb/gadget/fotg210.c
deleted file mode 100644
index af43433d88d..00000000000
--- a/drivers/usb/gadget/fotg210.c
+++ /dev/null
@@ -1,964 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Faraday USB 2.0 OTG Controller
- *
- * (C) Copyright 2010 Faraday Technology
- * Dante Su <dant...@faraday-tech.com>
- */
-
-#include <common.h>
-#include <command.h>
-#include <config.h>
-#include <cpu_func.h>
-#include <log.h>
-#include <net.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-#include <usb/fotg210.h>
-
-#define CFG_NUM_ENDPOINTS 4
-#define CFG_EP0_MAX_PACKET_SIZE 64
-#define CFG_EPX_MAX_PACKET_SIZE 512
-
-#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 2) /* 250 ms */
-
-struct fotg210_chip;
-
-struct fotg210_ep {
- struct usb_ep ep;
-
- uint maxpacket;
- uint id;
- uint stopped;
-
- struct list_head queue;
- struct fotg210_chip *chip;
- const struct usb_endpoint_descriptor *desc;
-};
-
-struct fotg210_request {
- struct usb_request req;
- struct list_head queue;
- struct fotg210_ep *ep;
-};
-
-struct fotg210_chip {
- struct usb_gadget gadget;
- struct usb_gadget_driver *driver;
- struct fotg210_regs *regs;
- uint8_t irq;
- uint16_t addr;
- int pullup;
- enum usb_device_state state;
- struct fotg210_ep ep[1 + CFG_NUM_ENDPOINTS];
-};
-
-static struct usb_endpoint_descriptor ep0_desc = {
- .bLength = sizeof(struct usb_endpoint_descriptor),
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
-};
-
-static inline int fifo_to_ep(struct fotg210_chip *chip, int id, int in)
-{
- return (id < 0) ? 0 : ((id & 0x03) + 1);
-}
-
-static inline int ep_to_fifo(struct fotg210_chip *chip, int id)
-{
- return (id <= 0) ? -1 : ((id - 1) & 0x03);
-}
-
-static inline int ep_reset(struct fotg210_chip *chip, uint8_t ep_addr)
-{
- int ep = ep_addr & USB_ENDPOINT_NUMBER_MASK;
- struct fotg210_regs *regs = chip->regs;
-
- if (ep_addr & USB_DIR_IN) {
- /* reset endpoint */
- setbits_le32(®s->iep[ep - 1], IEP_RESET);
- mdelay(1);
- clrbits_le32(®s->iep[ep - 1], IEP_RESET);
- /* clear endpoint stall */
- clrbits_le32(®s->iep[ep - 1], IEP_STALL);
- } else {
- /* reset endpoint */
- setbits_le32(®s->oep[ep - 1], OEP_RESET);
- mdelay(1);
- clrbits_le32(®s->oep[ep - 1], OEP_RESET);
- /* clear endpoint stall */
- clrbits_le32(®s->oep[ep - 1], OEP_STALL);
- }
-
- return 0;
-}
-
-static int fotg210_reset(struct fotg210_chip *chip)
-{
- struct fotg210_regs *regs = chip->regs;
- uint32_t i;
-
- chip->state = USB_STATE_POWERED;
-
- /* chip enable */
- writel(DEVCTRL_EN, ®s->dev_ctrl);
-
- /* device address reset */
- chip->addr = 0;
- writel(0, ®s->dev_addr);
-
- /* set idle counter to 7ms */
- writel(7, ®s->idle);
-
- /* disable all interrupts */
- writel(IMR_MASK, ®s->imr);
- writel(GIMR_MASK, ®s->gimr);
- writel(GIMR0_MASK, ®s->gimr0);
- writel(GIMR1_MASK, ®s->gimr1);
- writel(GIMR2_MASK, ®s->gimr2);
-
- /* clear interrupts */
- writel(ISR_MASK, ®s->isr);
- writel(0, ®s->gisr);
- writel(0, ®s->gisr0);
- writel(0, ®s->gisr1);
- writel(0, ®s->gisr2);
-
- /* chip reset */
- setbits_le32(®s->dev_ctrl, DEVCTRL_RESET);
- mdelay(10);
- if (readl(®s->dev_ctrl) & DEVCTRL_RESET) {
- printf("fotg210: chip reset failed\n");
- return -1;
- }
-
- /* CX FIFO reset */
- setbits_le32(®s->cxfifo, CXFIFO_CXFIFOCLR);
- mdelay(10);
- if (readl(®s->cxfifo) & CXFIFO_CXFIFOCLR) {
- printf("fotg210: ep0 fifo reset failed\n");
- return -1;
- }
-
- /* create static ep-fifo map (EP1 <-> FIFO0, EP2 <-> FIFO1 ...) */
- writel(EPMAP14_DEFAULT, ®s->epmap14);
- writel(EPMAP58_DEFAULT, ®s->epmap58);
- writel(FIFOMAP_DEFAULT, ®s->fifomap);
- writel(0, ®s->fifocfg);
- for (i = 0; i < 8; ++i) {
- writel(CFG_EPX_MAX_PACKET_SIZE, ®s->iep[i]);
- writel(CFG_EPX_MAX_PACKET_SIZE, ®s->oep[i]);
- }
-
- /* FIFO reset */
- for (i = 0; i < 4; ++i) {
- writel(FIFOCSR_RESET, ®s->fifocsr[i]);
- mdelay(10);
- if (readl(®s->fifocsr[i]) & FIFOCSR_RESET) {
- printf("fotg210: fifo%d reset failed\n", i);
- return -1;
- }
- }
-
- /* enable only device interrupt and triggered at level-high */
- writel(IMR_IRQLH | IMR_HOST | IMR_OTG, ®s->imr);
- writel(ISR_MASK, ®s->isr);
- /* disable EP0 IN/OUT interrupt */
- writel(GIMR0_CXOUT | GIMR0_CXIN, ®s->gimr0);
- /* disable EPX IN+SPK+OUT interrupts */
- writel(GIMR1_MASK, ®s->gimr1);
- /* disable wakeup+idle+dma+zlp interrupts */
- writel(GIMR2_WAKEUP | GIMR2_IDLE | GIMR2_DMAERR | GIMR2_DMAFIN
- | GIMR2_ZLPRX | GIMR2_ZLPTX, ®s->gimr2);
- /* enable all group interrupt */
- writel(0, ®s->gimr);
-
- /* suspend delay = 3 ms */
- writel(3, ®s->idle);
-
- /* turn-on device interrupts */
- setbits_le32(®s->dev_ctrl, DEVCTRL_GIRQ_EN);
-
- return 0;
-}
-
-static inline int fotg210_cxwait(struct fotg210_chip *chip, uint32_t mask)
-{
- struct fotg210_regs *regs = chip->regs;
- int ret = -1;
- ulong ts;
-
- for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
- if ((readl(®s->cxfifo) & mask) != mask)
- continue;
- ret = 0;
- break;
- }
-
- if (ret)
- printf("fotg210: cx/ep0 timeout\n");
-
- return ret;
-}
-
-static int fotg210_dma(struct fotg210_ep *ep, struct fotg210_request *req)
-{
- struct fotg210_chip *chip = ep->chip;
- struct fotg210_regs *regs = chip->regs;
- uint32_t tmp, ts;
- uint8_t *buf = req->req.buf + req->req.actual;
- uint32_t len = req->req.length - req->req.actual;
- int fifo = ep_to_fifo(chip, ep->id);
- int ret = -EBUSY;
-
- /* 1. init dma buffer */
- if (len > ep->maxpacket)
- len = ep->maxpacket;
-
- /* 2. wait for dma ready (hardware) */
- for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
- if (!(readl(®s->dma_ctrl) & DMACTRL_START)) {
- ret = 0;
- break;
- }
- }
- if (ret) {
- printf("fotg210: dma busy\n");
- req->req.status = ret;
- return ret;
- }
-
- /* 3. DMA target setup */
- if (ep->desc->bEndpointAddress & USB_DIR_IN)
- flush_dcache_range((ulong)buf, (ulong)buf + len);
- else
- invalidate_dcache_range((ulong)buf, (ulong)buf + len);
-
- writel(virt_to_phys(buf), ®s->dma_addr);
-
- if (ep->desc->bEndpointAddress & USB_DIR_IN) {
- if (ep->id == 0) {
- /* Wait until cx/ep0 fifo empty */
- fotg210_cxwait(chip, CXFIFO_CXFIFOE);
- udelay(1);
- writel(DMAFIFO_CX, ®s->dma_fifo);
- } else {
- /* Wait until epx fifo empty */
- fotg210_cxwait(chip, CXFIFO_FIFOE(fifo));
- writel(DMAFIFO_FIFO(fifo), ®s->dma_fifo);
- }
- writel(DMACTRL_LEN(len) | DMACTRL_MEM2FIFO, ®s->dma_ctrl);
- } else {
- uint32_t blen;
-
- if (ep->id == 0) {
- writel(DMAFIFO_CX, ®s->dma_fifo);
- do {
- blen = CXFIFO_BYTES(readl(®s->cxfifo));
- } while (blen < len);
- } else {
- writel(DMAFIFO_FIFO(fifo), ®s->dma_fifo);
- blen = FIFOCSR_BYTES(readl(®s->fifocsr[fifo]));
- }
- len = (len < blen) ? len : blen;
- writel(DMACTRL_LEN(len) | DMACTRL_FIFO2MEM, ®s->dma_ctrl);
- }
-
- /* 4. DMA start */
- setbits_le32(®s->dma_ctrl, DMACTRL_START);
-
- /* 5. DMA wait */
- ret = -EBUSY;
- for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
- tmp = readl(®s->gisr2);
- /* DMA complete */
- if (tmp & GISR2_DMAFIN) {
- ret = 0;
- break;
- }
- /* DMA error */
- if (tmp & GISR2_DMAERR) {
- printf("fotg210: dma error\n");
- break;
- }
- /* resume, suspend, reset */
- if (tmp & (GISR2_RESUME | GISR2_SUSPEND | GISR2_RESET)) {
- printf("fotg210: dma reset by host\n");
- break;
- }
- }
-
- /* 7. DMA target reset */
- if (ret)
- writel(DMACTRL_ABORT | DMACTRL_CLRFF, ®s->dma_ctrl);
-
- writel(0, ®s->gisr2);
- writel(0, ®s->dma_fifo);
-
- req->req.status = ret;
- if (!ret)
- req->req.actual += len;
- else
- printf("fotg210: ep%d dma error(code=%d)\n", ep->id, ret);
-
- return len;
-}
-
-/*
- * result of setup packet
- */
-#define CX_IDLE 0
-#define CX_FINISH 1
-#define CX_STALL 2
-
-static void fotg210_setup(struct fotg210_chip *chip)
-{
- int id, ret = CX_IDLE;
- uint32_t tmp[2];
- struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)tmp;
- struct fotg210_regs *regs = chip->regs;
-
- /*
- * If this is the first Cx 8 byte command,
- * we can now query USB mode (high/full speed; USB 2.0/USB 1.0)
- */
- if (chip->state == USB_STATE_POWERED) {
- chip->state = USB_STATE_DEFAULT;
- if (readl(®s->otgcsr) & OTGCSR_DEV_B) {
- /* Mini-B */
- if (readl(®s->dev_ctrl) & DEVCTRL_HS) {
- puts("fotg210: HS\n");
- chip->gadget.speed = USB_SPEED_HIGH;
- /* SOF mask timer = 1100 ticks */
- writel(SOFMTR_TMR(1100), ®s->sof_mtr);
- } else {
- puts("fotg210: FS\n");
- chip->gadget.speed = USB_SPEED_FULL;
- /* SOF mask timer = 10000 ticks */
- writel(SOFMTR_TMR(10000), ®s->sof_mtr);
- }
- } else {
- printf("fotg210: mini-A?\n");
- }
- }
-
- /* switch data port to ep0 */
- writel(DMAFIFO_CX, ®s->dma_fifo);
- /* fetch 8 bytes setup packet */
- tmp[0] = readl(®s->ep0_data);
- tmp[1] = readl(®s->ep0_data);
- /* release data port */
- writel(0, ®s->dma_fifo);
-
- if (req->bRequestType & USB_DIR_IN)
- ep0_desc.bEndpointAddress = USB_DIR_IN;
- else
- ep0_desc.bEndpointAddress = USB_DIR_OUT;
-
- ret = CX_IDLE;
-
- if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
- switch (req->bRequest) {
- case USB_REQ_SET_CONFIGURATION:
- debug("fotg210: set_cfg(%d)\n", req->wValue & 0x00FF);
- if (!(req->wValue & 0x00FF)) {
- chip->state = USB_STATE_ADDRESS;
- writel(chip->addr, ®s->dev_addr);
- } else {
- chip->state = USB_STATE_CONFIGURED;
- writel(chip->addr | DEVADDR_CONF,
- ®s->dev_addr);
- }
- ret = CX_IDLE;
- break;
-
- case USB_REQ_SET_ADDRESS:
- debug("fotg210: set_addr(0x%04X)\n", req->wValue);
- chip->state = USB_STATE_ADDRESS;
- chip->addr = req->wValue & DEVADDR_ADDR_MASK;
- ret = CX_FINISH;
- writel(chip->addr, ®s->dev_addr);
- break;
-
- case USB_REQ_CLEAR_FEATURE:
- debug("fotg210: clr_feature(%d, %d)\n",
- req->bRequestType & 0x03, req->wValue);
- switch (req->wValue) {
- case 0: /* [Endpoint] halt */
- ep_reset(chip, req->wIndex);
- ret = CX_FINISH;
- break;
- case 1: /* [Device] remote wake-up */
- case 2: /* [Device] test mode */
- default:
- ret = CX_STALL;
- break;
- }
- break;
-
- case USB_REQ_SET_FEATURE:
- debug("fotg210: set_feature(%d, %d)\n",
- req->wValue, req->wIndex & 0xf);
- switch (req->wValue) {
- case 0: /* Endpoint Halt */
- id = req->wIndex & 0xf;
- setbits_le32(®s->iep[id - 1], IEP_STALL);
- setbits_le32(®s->oep[id - 1], OEP_STALL);
- ret = CX_FINISH;
- break;
- case 1: /* Remote Wakeup */
- case 2: /* Test Mode */
- default:
- ret = CX_STALL;
- break;
- }
- break;
-
- case USB_REQ_GET_STATUS:
- debug("fotg210: get_status\n");
- ret = CX_STALL;
- break;
-
- case USB_REQ_SET_DESCRIPTOR:
- debug("fotg210: set_descriptor\n");
- ret = CX_STALL;
- break;
-
- case USB_REQ_SYNCH_FRAME:
- debug("fotg210: sync frame\n");
- ret = CX_STALL;
- break;
- }
- } /* if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) */
-
- if (ret == CX_IDLE && chip->driver->setup) {
- if (chip->driver->setup(&chip->gadget, req) < 0)
- ret = CX_STALL;
- else
- ret = CX_FINISH;
- }
-
- switch (ret) {
- case CX_FINISH:
- setbits_le32(®s->cxfifo, CXFIFO_CXFIN);
- break;
-
- case CX_STALL:
- setbits_le32(®s->cxfifo, CXFIFO_CXSTALL | CXFIFO_CXFIN);
- printf("fotg210: cx_stall!\n");
- break;
-
- case CX_IDLE:
- debug("fotg210: cx_idle?\n");
- default:
- break;
- }
-}
-
-/*
- * fifo - FIFO id
- * zlp - zero length packet
- */
-static void fotg210_recv(struct fotg210_chip *chip, int ep_id)
-{
- struct fotg210_regs *regs = chip->regs;
- struct fotg210_ep *ep = chip->ep + ep_id;
- struct fotg210_request *req;
- int len;
-
- if (ep->stopped || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
- printf("fotg210: ep%d recv, invalid!\n", ep->id);
- return;
- }
-
- if (list_empty(&ep->queue)) {
- printf("fotg210: ep%d recv, drop!\n", ep->id);
- return;
- }
-
- req = list_first_entry(&ep->queue, struct fotg210_request, queue);
- len = fotg210_dma(ep, req);
- if (len < ep->ep.maxpacket || req->req.length <= req->req.actual) {
- list_del_init(&req->queue);
- if (req->req.complete)
- req->req.complete(&ep->ep, &req->req);
- }
-
- if (ep->id > 0 && list_empty(&ep->queue)) {
- setbits_le32(®s->gimr1,
- GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id)));
- }
-}
-
-/*
- * USB Gadget Layer
- */
-static int fotg210_ep_enable(
- struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
-{
- struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
- struct fotg210_chip *chip = ep->chip;
- struct fotg210_regs *regs = chip->regs;
- int id = ep_to_fifo(chip, ep->id);
- int in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0;
-
- if (!_ep || !desc
- || desc->bDescriptorType != USB_DT_ENDPOINT
- || le16_to_cpu(desc->wMaxPacketSize) == 0) {
- printf("fotg210: bad ep or descriptor\n");
- return -EINVAL;
- }
-
- ep->desc = desc;
- ep->stopped = 0;
-
- if (in)
- setbits_le32(®s->fifomap, FIFOMAP(id, FIFOMAP_IN));
-
- switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
- case USB_ENDPOINT_XFER_CONTROL:
- return -EINVAL;
-
- case USB_ENDPOINT_XFER_ISOC:
- setbits_le32(®s->fifocfg,
- FIFOCFG(id, FIFOCFG_EN | FIFOCFG_ISOC));
- break;
-
- case USB_ENDPOINT_XFER_BULK:
- setbits_le32(®s->fifocfg,
- FIFOCFG(id, FIFOCFG_EN | FIFOCFG_BULK));
- break;
-
- case USB_ENDPOINT_XFER_INT:
- setbits_le32(®s->fifocfg,
- FIFOCFG(id, FIFOCFG_EN | FIFOCFG_INTR));
- break;
- }
-
- return 0;
-}
-
-static int fotg210_ep_disable(struct usb_ep *_ep)
-{
- struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
- struct fotg210_chip *chip = ep->chip;
- struct fotg210_regs *regs = chip->regs;
- int id = ep_to_fifo(chip, ep->id);
-
- ep->desc = NULL;
- ep->stopped = 1;
-
- clrbits_le32(®s->fifocfg, FIFOCFG(id, FIFOCFG_CFG_MASK));
- clrbits_le32(®s->fifomap, FIFOMAP(id, FIFOMAP_DIR_MASK));
-
- return 0;
-}
-
-static struct usb_request *fotg210_ep_alloc_request(
- struct usb_ep *_ep, gfp_t gfp_flags)
-{
- struct fotg210_request *req = malloc(sizeof(*req));
-
- if (req) {
- memset(req, 0, sizeof(*req));
- INIT_LIST_HEAD(&req->queue);
- }
- return &req->req;
-}
-
-static void fotg210_ep_free_request(
- struct usb_ep *_ep, struct usb_request *_req)
-{
- struct fotg210_request *req;
-
- req = container_of(_req, struct fotg210_request, req);
- free(req);
-}
-
-static int fotg210_ep_queue(
- struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
-{
- struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
- struct fotg210_chip *chip = ep->chip;
- struct fotg210_regs *regs = chip->regs;
- struct fotg210_request *req;
-
- req = container_of(_req, struct fotg210_request, req);
- if (!_req || !_req->complete || !_req->buf
- || !list_empty(&req->queue)) {
- printf("fotg210: invalid request to ep%d\n", ep->id);
- return -EINVAL;
- }
-
- if (!chip || chip->state == USB_STATE_SUSPENDED) {
- printf("fotg210: request while chip suspended\n");
- return -EINVAL;
- }
-
- req->req.actual = 0;
- req->req.status = -EINPROGRESS;
-
- if (req->req.length == 0) {
- req->req.status = 0;
- if (req->req.complete)
- req->req.complete(&ep->ep, &req->req);
- return 0;
- }
-
- if (ep->id == 0) {
- do {
- int len = fotg210_dma(ep, req);
- if (len < ep->ep.maxpacket)
- break;
- if (ep->desc->bEndpointAddress & USB_DIR_IN)
- udelay(100);
- } while (req->req.length > req->req.actual);
- } else {
- if (ep->desc->bEndpointAddress & USB_DIR_IN) {
- do {
- int len = fotg210_dma(ep, req);
- if (len < ep->ep.maxpacket)
- break;
- } while (req->req.length > req->req.actual);
- } else {
- list_add_tail(&req->queue, &ep->queue);
- clrbits_le32(®s->gimr1,
- GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id)));
- }
- }
-
- if (ep->id == 0 || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
- if (req->req.complete)
- req->req.complete(&ep->ep, &req->req);
- }
-
- return 0;
-}
-
-static int fotg210_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-{
- struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
- struct fotg210_request *req;
-
- /* make sure it's actually queued on this endpoint */
- list_for_each_entry(req, &ep->queue, queue) {
- if (&req->req == _req)
- break;
- }
- if (&req->req != _req)
- return -EINVAL;
-
- /* remove the request */
- list_del_init(&req->queue);
-
- /* update status & invoke complete callback */
- if (req->req.status == -EINPROGRESS) {
- req->req.status = -ECONNRESET;
- if (req->req.complete)
- req->req.complete(_ep, &req->req);
- }
-
- return 0;
-}
-
-static int fotg210_ep_halt(struct usb_ep *_ep, int halt)
-{
- struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
- struct fotg210_chip *chip = ep->chip;
- struct fotg210_regs *regs = chip->regs;
- int ret = -1;
-
- debug("fotg210: ep%d halt=%d\n", ep->id, halt);
-
- /* Endpoint STALL */
- if (ep->id > 0 && ep->id <= CFG_NUM_ENDPOINTS) {
- if (halt) {
- /* wait until all ep fifo empty */
- fotg210_cxwait(chip, 0xf00);
- /* stall */
- if (ep->desc->bEndpointAddress & USB_DIR_IN) {
- setbits_le32(®s->iep[ep->id - 1],
- IEP_STALL);
- } else {
- setbits_le32(®s->oep[ep->id - 1],
- OEP_STALL);
- }
- } else {
- if (ep->desc->bEndpointAddress & USB_DIR_IN) {
- clrbits_le32(®s->iep[ep->id - 1],
- IEP_STALL);
- } else {
- clrbits_le32(®s->oep[ep->id - 1],
- OEP_STALL);
- }
- }
- ret = 0;
- }
-
- return ret;
-}
-
-/*
- * activate/deactivate link with host.
- */
-static void pullup(struct fotg210_chip *chip, int is_on)
-{
- struct fotg210_regs *regs = chip->regs;
-
- if (is_on) {
- if (!chip->pullup) {
- chip->state = USB_STATE_POWERED;
- chip->pullup = 1;
- /* enable the chip */
- setbits_le32(®s->dev_ctrl, DEVCTRL_EN);
- /* clear unplug bit (BIT0) */
- clrbits_le32(®s->phy_tmsr, PHYTMSR_UNPLUG);
- }
- } else {
- chip->state = USB_STATE_NOTATTACHED;
- chip->pullup = 0;
- chip->addr = 0;
- writel(chip->addr, ®s->dev_addr);
- /* set unplug bit (BIT0) */
- setbits_le32(®s->phy_tmsr, PHYTMSR_UNPLUG);
- /* disable the chip */
- clrbits_le32(®s->dev_ctrl, DEVCTRL_EN);
- }
-}
-
-static int fotg210_pullup(struct usb_gadget *_gadget, int is_on)
-{
- struct fotg210_chip *chip;
-
- chip = container_of(_gadget, struct fotg210_chip, gadget);
-
- debug("fotg210: pullup=%d\n", is_on);
-
- pullup(chip, is_on);
-
- return 0;
-}
-
-static int fotg210_get_frame(struct usb_gadget *_gadget)
-{
- struct fotg210_chip *chip;
- struct fotg210_regs *regs;
-
- chip = container_of(_gadget, struct fotg210_chip, gadget);
- regs = chip->regs;
-
- return SOFFNR_FNR(readl(®s->sof_fnr));
-}
-
-static struct usb_gadget_ops fotg210_gadget_ops = {
- .get_frame = fotg210_get_frame,
- .pullup = fotg210_pullup,
-};
-
-static struct usb_ep_ops fotg210_ep_ops = {
- .enable = fotg210_ep_enable,
- .disable = fotg210_ep_disable,
- .queue = fotg210_ep_queue,
- .dequeue = fotg210_ep_dequeue,
- .set_halt = fotg210_ep_halt,
- .alloc_request = fotg210_ep_alloc_request,
- .free_request = fotg210_ep_free_request,
-};
-
-static struct fotg210_chip controller = {
- .regs = (void __iomem *)CONFIG_FOTG210_BASE,
- .gadget = {
- .name = "fotg210_udc",
- .ops = &fotg210_gadget_ops,
- .ep0 = &controller.ep[0].ep,
- .speed = USB_SPEED_UNKNOWN,
- .is_dualspeed = 1,
- .is_otg = 0,
- .is_a_peripheral = 0,
- .b_hnp_enable = 0,
- .a_hnp_support = 0,
- .a_alt_hnp_support = 0,
- },
- .ep[0] = {
- .id = 0,
- .ep = {
- .name = "ep0",
- .ops = &fotg210_ep_ops,
- },
- .desc = &ep0_desc,
- .chip = &controller,
- .maxpacket = CFG_EP0_MAX_PACKET_SIZE,
- },
- .ep[1] = {
- .id = 1,
- .ep = {
- .name = "ep1",
- .ops = &fotg210_ep_ops,
- },
- .chip = &controller,
- .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
- },
- .ep[2] = {
- .id = 2,
- .ep = {
- .name = "ep2",
- .ops = &fotg210_ep_ops,
- },
- .chip = &controller,
- .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
- },
- .ep[3] = {
- .id = 3,
- .ep = {
- .name = "ep3",
- .ops = &fotg210_ep_ops,
- },
- .chip = &controller,
- .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
- },
- .ep[4] = {
- .id = 4,
- .ep = {
- .name = "ep4",
- .ops = &fotg210_ep_ops,
- },
- .chip = &controller,
- .maxpacket = CFG_EPX_MAX_PACKET_SIZE,
- },
-};
-
-int usb_gadget_handle_interrupts(int index)
-{
- struct fotg210_chip *chip = &controller;
- struct fotg210_regs *regs = chip->regs;
- uint32_t id, st, isr, gisr;
-
- isr = readl(®s->isr) & (~readl(®s->imr));
- gisr = readl(®s->gisr) & (~readl(®s->gimr));
- if (!(isr & ISR_DEV) || !gisr)
- return 0;
-
- writel(ISR_DEV, ®s->isr);
-
- /* CX interrupts */
- if (gisr & GISR_GRP0) {
- st = readl(®s->gisr0);
- /*
- * Write 1 and then 0 works for both W1C & RW.
- *
- * HW v1.11.0+: It's a W1C register (write 1 clear)
- * HW v1.10.0-: It's a R/W register (write 0 clear)
- */
- writel(st & GISR0_CXABORT, ®s->gisr0);
- writel(0, ®s->gisr0);
-
- if (st & GISR0_CXERR)
- printf("fotg210: cmd error\n");
-
- if (st & GISR0_CXABORT)
- printf("fotg210: cmd abort\n");
-
- if (st & GISR0_CXSETUP) /* setup */
- fotg210_setup(chip);
- else if (st & GISR0_CXEND) /* command finish */
- setbits_le32(®s->cxfifo, CXFIFO_CXFIN);
- }
-
- /* FIFO interrupts */
- if (gisr & GISR_GRP1) {
- st = readl(®s->gisr1);
- for (id = 0; id < 4; ++id) {
- if (st & GISR1_RX_FIFO(id))
- fotg210_recv(chip, fifo_to_ep(chip, id, 0));
- }
- }
-
- /* Device Status Interrupts */
- if (gisr & GISR_GRP2) {
- st = readl(®s->gisr2);
- /*
- * Write 1 and then 0 works for both W1C & RW.
- *
- * HW v1.11.0+: It's a W1C register (write 1 clear)
- * HW v1.10.0-: It's a R/W register (write 0 clear)
- */
- writel(st, ®s->gisr2);
- writel(0, ®s->gisr2);
-
- if (st & GISR2_RESET)
- printf("fotg210: reset by host\n");
- else if (st & GISR2_SUSPEND)
- printf("fotg210: suspend/removed\n");
- else if (st & GISR2_RESUME)
- printf("fotg210: resume\n");
-
- /* Errors */
- if (st & GISR2_ISOCERR)
- printf("fotg210: iso error\n");
- if (st & GISR2_ISOCABT)
- printf("fotg210: iso abort\n");
- if (st & GISR2_DMAERR)
- printf("fotg210: dma error\n");
- }
-
- return 0;
-}
-
-int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-{
- int i, ret = 0;
- struct fotg210_chip *chip = &controller;
-
- if (!driver || !driver->bind || !driver->setup) {
- puts("fotg210: bad parameter.\n");
- return -EINVAL;
- }
-
- INIT_LIST_HEAD(&chip->gadget.ep_list);
- for (i = 0; i < CFG_NUM_ENDPOINTS + 1; ++i) {
- struct fotg210_ep *ep = chip->ep + i;
-
- ep->ep.maxpacket = ep->maxpacket;
- INIT_LIST_HEAD(&ep->queue);
-
- if (ep->id == 0) {
- ep->stopped = 0;
- } else {
- ep->stopped = 1;
- list_add_tail(&ep->ep.ep_list, &chip->gadget.ep_list);
- }
- }
-
- if (fotg210_reset(chip)) {
- puts("fotg210: reset failed.\n");
- return -EINVAL;
- }
-
- ret = driver->bind(&chip->gadget);
- if (ret) {
- debug("fotg210: driver->bind() returned %d\n", ret);
- return ret;
- }
- chip->driver = driver;
-
- return ret;
-}
-
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-{
- struct fotg210_chip *chip = &controller;
-
- driver->unbind(&chip->gadget);
- chip->driver = NULL;
-
- pullup(chip, 0);
-
- return 0;
-}
diff --git a/drivers/usb/gadget/gadget_chips.h
b/drivers/usb/gadget/gadget_chips.h
index abc6dc7f89f..98156c312d2 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -117,12 +117,6 @@
#define gadget_is_ci(g) 0
#endif
-#ifdef CONFIG_USB_GADGET_FOTG210
-#define gadget_is_fotg210(g) (!strcmp("fotg210_udc", (g)->name))
-#else
-#define gadget_is_fotg210(g) 0
-#endif
-
#ifdef CONFIG_USB_DWC3_GADGET
#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name))
#else
@@ -202,8 +196,6 @@ static inline int usb_gadget_controller_number(struct
usb_gadget *gadget)
return 0x20;
else if (gadget_is_ci(gadget))
return 0x21;
- else if (gadget_is_fotg210(gadget))
- return 0x22;
else if (gadget_is_dwc3(gadget))
return 0x23;
else if (gadget_is_cdns3(gadget))
diff --git a/include/usb/fotg210.h b/include/usb/fotg210.h
deleted file mode 100644
index 292ce54e0c4..00000000000
--- a/include/usb/fotg210.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Faraday USB 2.0 OTG Controller
- *
- * (C) Copyright 2010 Faraday Technology
- * Dante Su <dant...@faraday-tech.com>
- */
-
-#ifndef _FOTG210_H
-#define _FOTG210_H
-
-struct fotg210_regs {
- /* USB Host Controller */
- struct {
- uint32_t data[4];
- } hccr; /* 0x00 - 0x0f: hccr */
- struct {
- uint32_t data[9];
- } hcor; /* 0x10 - 0x33: hcor */
- uint32_t rsvd1[3];
- uint32_t miscr; /* 0x40: Miscellaneous Register */
- uint32_t rsvd2[15];
- /* USB OTG Controller */
- uint32_t otgcsr;/* 0x80: OTG Control Status Register */
- uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */
- uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */
- uint32_t rsvd3[13];
- uint32_t isr; /* 0xC0: Global Interrupt Status Register */
- uint32_t imr; /* 0xC4: Global Interrupt Mask Register */
- uint32_t rsvd4[14];
- /* USB Device Controller */
- uint32_t dev_ctrl;/* 0x100: Device Control Register */
- uint32_t dev_addr;/* 0x104: Device Address Register */
- uint32_t dev_test;/* 0x108: Device Test Register */
- uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */
- uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */
- uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */
- uint32_t rsvd5[2];
- uint32_t cxfifo;/* 0x120: CX FIFO Register */
- uint32_t idle; /* 0x124: IDLE Counter Register */
- uint32_t rsvd6[2];
- uint32_t gimr; /* 0x130: Group Interrupt Mask Register */
- uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */
- uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */
- uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */
- uint32_t gisr; /* 0x140: Group Interrupt Status Register */
- uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */
- uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */
- uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */
- uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */
- uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */
- uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */
- uint32_t rsvd7[1];
- uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */
- uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */
- uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */
- uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */
- uint32_t fifomap;/* 0x1a8: FIFO Map Register */
- uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */
- uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */
- uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */
- uint32_t rsvd8[1];
- uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */
- uint32_t dma_addr; /* 0x1cc: DMA Address Register */
- uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */
-};
-
-/* Miscellaneous Register */
-#define MISCR_SUSPEND (1 << 6) /* Put transceiver in suspend mode */
-#define MISCR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
-#define MISCR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
-#define MISCR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
-
-/* OTG Control Status Register */
-#define OTGCSR_SPD_HIGH (2 << 22) /* Speed of the attached device (host) */
-#define OTGCSR_SPD_LOW (1 << 22)
-#define OTGCSR_SPD_FULL (0 << 22)
-#define OTGCSR_SPD_MASK (3 << 22)
-#define OTGCSR_SPD_SHIFT 22
-#define OTGCSR_SPD(x) (((x) >> 22) & 0x03)
-#define OTGCSR_DEV_A (0 << 21) /* Acts as A-device */
-#define OTGCSR_DEV_B (1 << 21) /* Acts as B-device */
-#define OTGCSR_ROLE_H (0 << 20) /* Acts as Host */
-#define OTGCSR_ROLE_D (1 << 20) /* Acts as Device */
-#define OTGCSR_A_VBUS_VLD (1 << 19) /* A-device VBUS Valid */
-#define OTGCSR_A_SESS_VLD (1 << 18) /* A-device Session Valid */
-#define OTGCSR_B_SESS_VLD (1 << 17) /* B-device Session Valid */
-#define OTGCSR_B_SESS_END (1 << 16) /* B-device Session End */
-#define OTGCSR_HFT_LONG (1 << 11) /* HDISCON noise filter = 270 us*/
-#define OTGCSR_HFT (0 << 11) /* HDISCON noise filter = 135 us*/
-#define OTGCSR_VFT_LONG (1 << 10) /* VBUS noise filter = 472 us*/
-#define OTGCSR_VFT (0 << 10) /* VBUS noise filter = 135 us*/
-#define OTGCSR_IDFT_LONG (1 << 9) /* ID noise filter = 4 ms*/
-#define OTGCSR_IDFT (0 << 9) /* ID noise filter = 3 ms*/
-#define OTGCSR_A_SRPR_VBUS (0 << 8) /* A-device: SRP responds to VBUS */
-#define OTGCSR_A_SRPR_DATA (1 << 8) /* A-device: SRP responds to DATA-LINE */
-#define OTGCSR_A_SRP_EN (1 << 7) /* A-device SRP detection enabled */
-#define OTGCSR_A_HNP (1 << 6) /* Set role=A-device with HNP enabled */
-#define OTGCSR_A_BUSDROP (1 << 5) /* A-device drop bus (power-down) */
-#define OTGCSR_A_BUSREQ (1 << 4) /* A-device request bus */
-#define OTGCSR_B_VBUS_DISC (1 << 2) /* B-device discharges VBUS */
-#define OTGCSR_B_HNP (1 << 1) /* B-device enable HNP */
-#define OTGCSR_B_BUSREQ (1 << 0) /* B-device request bus */
-
-/* OTG Interrupt Status Register */
-#define OTGISR_APRM (1 << 12) /* Mini-A plug removed */
-#define OTGISR_BPRM (1 << 11) /* Mini-B plug removed */
-#define OTGISR_OVD (1 << 10) /* over-current detected */
-#define OTGISR_IDCHG (1 << 9) /* ID(A/B) changed */
-#define OTGISR_RLCHG (1 << 8) /* Role(Host/Device) changed */
-#define OTGISR_BSESSEND (1 << 6) /* B-device Session End */
-#define OTGISR_AVBUSERR (1 << 5) /* A-device VBUS Error */
-#define OTGISR_ASRP (1 << 4) /* A-device SRP detected */
-#define OTGISR_BSRP (1 << 0) /* B-device SRP complete */
-
-/* OTG Interrupt Enable Register */
-#define OTGIER_APRM (1 << 12) /* Mini-A plug removed */
-#define OTGIER_BPRM (1 << 11) /* Mini-B plug removed */
-#define OTGIER_OVD (1 << 10) /* over-current detected */
-#define OTGIER_IDCHG (1 << 9) /* ID(A/B) changed */
-#define OTGIER_RLCHG (1 << 8) /* Role(Host/Device) changed */
-#define OTGIER_BSESSEND (1 << 6) /* B-device Session End */
-#define OTGIER_AVBUSERR (1 << 5) /* A-device VBUS Error */
-#define OTGIER_ASRP (1 << 4) /* A-device SRP detected */
-#define OTGIER_BSRP (1 << 0) /* B-device SRP complete */
-
-/* Global Interrupt Status Register (W1C) */
-#define ISR_HOST (1 << 2) /* USB Host interrupt */
-#define ISR_OTG (1 << 1) /* USB OTG interrupt */
-#define ISR_DEV (1 << 0) /* USB Device interrupt */
-#define ISR_MASK 0x07
-
-/* Global Interrupt Mask Register */
-#define IMR_IRQLH (1 << 3) /* Interrupt triggered at level-high */
-#define IMR_IRQLL (0 << 3) /* Interrupt triggered at level-low */
-#define IMR_HOST (1 << 2) /* USB Host interrupt */
-#define IMR_OTG (1 << 1) /* USB OTG interrupt */
-#define IMR_DEV (1 << 0) /* USB Device interrupt */
-#define IMR_MASK 0x0f
-
-/* Device Control Register */
-#define DEVCTRL_FS_FORCED (1 << 9) /* Forced to be Full-Speed Mode */
-#define DEVCTRL_HS (1 << 6) /* High Speed Mode */
-#define DEVCTRL_FS (0 << 6) /* Full Speed Mode */
-#define DEVCTRL_EN (1 << 5) /* Chip Enable */
-#define DEVCTRL_RESET (1 << 4) /* Chip Software Reset */
-#define DEVCTRL_SUSPEND (1 << 3) /* Enter Suspend Mode */
-#define DEVCTRL_GIRQ_EN (1 << 2) /* Global Interrupt Enabled */
-#define DEVCTRL_HALFSPD (1 << 1) /* Half speed mode for FPGA test */
-#define DEVCTRL_RWAKEUP (1 << 0) /* Enable remote wake-up */
-
-/* Device Address Register */
-#define DEVADDR_CONF (1 << 7) /* SET_CONFIGURATION has been executed */
-#define DEVADDR_ADDR(x) ((x) & 0x7f)
-#define DEVADDR_ADDR_MASK 0x7f
-
-/* Device Test Register */
-#define DEVTEST_NOSOF (1 << 6) /* Do not generate SOF */
-#define DEVTEST_TST_MODE (1 << 5) /* Enter Test Mode */
-#define DEVTEST_TST_NOTS (1 << 4) /* Do not toggle sequence */
-#define DEVTEST_TST_NOCRC (1 << 3) /* Do not append CRC */
-#define DEVTEST_TST_CLREA (1 << 2) /* Clear External Side Address */
-#define DEVTEST_TST_CXLP (1 << 1) /* EP0 loopback test */
-#define DEVTEST_TST_CLRFF (1 << 0) /* Clear FIFO */
-
-/* SOF Frame Number Register */
-#define SOFFNR_UFN(x) (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */
-#define SOFFNR_FNR(x) ((x) & 0x7ff) /* SOF Frame Number */
-
-/* SOF Mask Timer Register */
-#define SOFMTR_TMR(x) ((x) & 0xffff)
-
-/* PHY Test Mode Selector Register */
-#define PHYTMSR_TST_PKT (1 << 4) /* Packet send test */
-#define PHYTMSR_TST_SE0NAK (1 << 3) /* High-Speed quiescent state */
-#define PHYTMSR_TST_KSTA (1 << 2) /* High-Speed K state */
-#define PHYTMSR_TST_JSTA (1 << 1) /* High-Speed J state */
-#define PHYTMSR_UNPLUG (1 << 0) /* Enable soft-detachment */
-
-/* CX FIFO Register */
-#define CXFIFO_BYTES(x) (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */
-#define CXFIFO_FIFOE(x) (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */
-#define CXFIFO_FIFOE_FIFO0 (1 << 8)
-#define CXFIFO_FIFOE_FIFO1 (1 << 9)
-#define CXFIFO_FIFOE_FIFO2 (1 << 10)
-#define CXFIFO_FIFOE_FIFO3 (1 << 11)
-#define CXFIFO_FIFOE_MASK (0x0f << 8)
-#define CXFIFO_CXFIFOE (1 << 5) /* CX FIFO empty */
-#define CXFIFO_CXFIFOF (1 << 4) /* CX FIFO full */
-#define CXFIFO_CXFIFOCLR (1 << 3) /* CX FIFO clear */
-#define CXFIFO_CXSTALL (1 << 2) /* CX Stall */
-#define CXFIFO_TSTPKTFIN (1 << 1) /* Test packet data transfer finished */
-#define CXFIFO_CXFIN (1 << 0) /* CX data transfer finished */
-
-/* IDLE Counter Register */
-#define IDLE_MS(x) ((x) & 0x07) /* PHY suspend delay = x ms */
-
-/* Group Interrupt Mask(Disable) Register */
-#define GIMR_GRP2 (1 << 2) /* Disable interrupt group 2 */
-#define GIMR_GRP1 (1 << 1) /* Disable interrupt group 1 */
-#define GIMR_GRP0 (1 << 0) /* Disable interrupt group 0 */
-#define GIMR_MASK 0x07
-
-/* Group Interrupt Mask(Disable) Register 0 (CX) */
-#define GIMR0_CXABORT (1 << 5) /* CX command abort interrupt */
-#define GIMR0_CXERR (1 << 4) /* CX command error interrupt */
-#define GIMR0_CXEND (1 << 3) /* CX command end interrupt */
-#define GIMR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
-#define GIMR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
-#define GIMR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
-#define GIMR0_MASK 0x3f
-
-/* Group Interrupt Mask(Disable) Register 1 (FIFO) */
-#define GIMR1_FIFO_IN(x) (1 << (((x) & 3) + 16)) /* FIFOx IN */
-#define GIMR1_FIFO_TX(x) GIMR1_FIFO_IN(x)
-#define GIMR1_FIFO_OUT(x) (1 << (((x) & 3) * 2)) /* FIFOx OUT */
-#define GIMR1_FIFO_SPK(x) (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */
-#define GIMR1_FIFO_RX(x) (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x))
-#define GIMR1_MASK 0xf00ff
-
-/* Group Interrupt Mask(Disable) Register 2 (Device) */
-#define GIMR2_WAKEUP (1 << 10) /* Device waked up */
-#define GIMR2_IDLE (1 << 9) /* Device idle */
-#define GIMR2_DMAERR (1 << 8) /* DMA error */
-#define GIMR2_DMAFIN (1 << 7) /* DMA finished */
-#define GIMR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
-#define GIMR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
-#define GIMR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
-#define GIMR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
-#define GIMR2_RESUME (1 << 2) /* Resume state change Interrupt */
-#define GIMR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
-#define GIMR2_RESET (1 << 0) /* Reset Interrupt */
-#define GIMR2_MASK 0x7ff
-
-/* Group Interrupt Status Register */
-#define GISR_GRP2 (1 << 2) /* Interrupt group 2 */
-#define GISR_GRP1 (1 << 1) /* Interrupt group 1 */
-#define GISR_GRP0 (1 << 0) /* Interrupt group 0 */
-
-/* Group Interrupt Status Register 0 (CX) */
-#define GISR0_CXABORT (1 << 5) /* CX command abort interrupt */
-#define GISR0_CXERR (1 << 4) /* CX command error interrupt */
-#define GISR0_CXEND (1 << 3) /* CX command end interrupt */
-#define GISR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
-#define GISR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
-#define GISR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
-
-/* Group Interrupt Status Register 1 (FIFO) */
-#define GISR1_IN_FIFO(x) (1 << (((x) & 0x03) + 16)) /* FIFOx IN */
-#define GISR1_OUT_FIFO(x) (1 << (((x) & 0x03) * 2)) /* FIFOx OUT */
-#define GISR1_SPK_FIFO(x) (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */
-#define GISR1_RX_FIFO(x) (3 << (((x) & 0x03) * 2)) /* FIFOx OUT/SPK */
-
-/* Group Interrupt Status Register 2 (Device) */
-#define GISR2_WAKEUP (1 << 10) /* Device waked up */
-#define GISR2_IDLE (1 << 9) /* Device idle */
-#define GISR2_DMAERR (1 << 8) /* DMA error */
-#define GISR2_DMAFIN (1 << 7) /* DMA finished */
-#define GISR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
-#define GISR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
-#define GISR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
-#define GISR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
-#define GISR2_RESUME (1 << 2) /* Resume state change Interrupt */
-#define GISR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
-#define GISR2_RESET (1 << 0) /* Reset Interrupt */
-
-/* Receive Zero-Length-Packet Register */
-#define RXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP rx interrupt */
-
-/* Transfer Zero-Length-Packet Register */
-#define TXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP tx interrupt */
-
-/* ISOC Error/Abort Status Register */
-#define ISOEASR_EP(x) (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */
-
-/* IN Endpoint Register */
-#define IEP_SENDZLP (1 << 15) /* Send Zero-Length-Packet */
-#define IEP_TNRHB(x) (((x) & 0x03) << 13) \
- /* Transaction Number for High-Bandwidth EP(ISOC) */
-#define IEP_RESET (1 << 12) /* Reset Toggle Sequence */
-#define IEP_STALL (1 << 11) /* Stall */
-#define IEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
-
-/* OUT Endpoint Register */
-#define OEP_RESET (1 << 12) /* Reset Toggle Sequence */
-#define OEP_STALL (1 << 11) /* Stall */
-#define OEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
-
-/* Endpoint Map Register (EP1 ~ EP4) */
-#define EPMAP14_SET_IN(ep, fifo) \
- ((fifo) & 3) << (((ep) - 1) << 3 + 0)
-#define EPMAP14_SET_OUT(ep, fifo) \
- ((fifo) & 3) << (((ep) - 1) << 3 + 4)
-#define EPMAP14_SET(ep, in, out) \
- do { \
- EPMAP14_SET_IN(ep, in); \
- EPMAP14_SET_OUT(ep, out); \
- } while (0)
-
-#define EPMAP14_DEFAULT 0x33221100 /* EP1->FIFO0, EP2->FIFO1... */
-
-/* Endpoint Map Register (EP5 ~ EP8) */
-#define EPMAP58_SET_IN(ep, fifo) \
- ((fifo) & 3) << (((ep) - 5) << 3 + 0)
-#define EPMAP58_SET_OUT(ep, fifo) \
- ((fifo) & 3) << (((ep) - 5) << 3 + 4)
-#define EPMAP58_SET(ep, in, out) \
- do { \
- EPMAP58_SET_IN(ep, in); \
- EPMAP58_SET_OUT(ep, out); \
- } while (0)
-
-#define EPMAP58_DEFAULT 0x00000000 /* All EPx->FIFO0 */
-
-/* FIFO Map Register */
-#define FIFOMAP_BIDIR (2 << 4)
-#define FIFOMAP_IN (1 << 4)
-#define FIFOMAP_OUT (0 << 4)
-#define FIFOMAP_DIR_MASK 0x30
-#define FIFOMAP_EP(x) ((x) & 0x0f)
-#define FIFOMAP_EP_MASK 0x0f
-#define FIFOMAP_CFG_MASK 0x3f
-#define FIFOMAP_DEFAULT 0x04030201 /* FIFO0->EP1, FIFO1->EP2... */
-#define FIFOMAP(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
-
-/* FIFO Configuration Register */
-#define FIFOCFG_EN (1 << 5)
-#define FIFOCFG_BLKSZ_1024 (1 << 4)
-#define FIFOCFG_BLKSZ_512 (0 << 4)
-#define FIFOCFG_3BLK (2 << 2)
-#define FIFOCFG_2BLK (1 << 2)
-#define FIFOCFG_1BLK (0 << 2)
-#define FIFOCFG_NBLK_MASK 3
-#define FIFOCFG_NBLK_SHIFT 2
-#define FIFOCFG_INTR (3 << 0)
-#define FIFOCFG_BULK (2 << 0)
-#define FIFOCFG_ISOC (1 << 0)
-#define FIFOCFG_RSVD (0 << 0) /* Reserved */
-#define FIFOCFG_TYPE_MASK 3
-#define FIFOCFG_TYPE_SHIFT 0
-#define FIFOCFG_CFG_MASK 0x3f
-#define FIFOCFG(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
-
-/* FIFO Control Status Register */
-#define FIFOCSR_RESET (1 << 12) /* FIFO Reset */
-#define FIFOCSR_BYTES(x) ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */
-
-/* DMA Target FIFO Register */
-#define DMAFIFO_CX (1 << 4) /* DMA FIFO = CX FIFO */
-#define DMAFIFO_FIFO(x) (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */
-
-/* DMA Control Register */
-#define DMACTRL_LEN(x) (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */
-#define DMACTRL_LEN_SHIFT 8
-#define DMACTRL_CLRFF (1 << 4) /* Clear FIFO upon DMA abort */
-#define DMACTRL_ABORT (1 << 3) /* DMA abort */
-#define DMACTRL_IO2IO (1 << 2) /* IO to IO */
-#define DMACTRL_FIFO2MEM (0 << 1) /* FIFO to Memory */
-#define DMACTRL_MEM2FIFO (1 << 1) /* Memory to FIFO */
-#define DMACTRL_START (1 << 0) /* DMA start */
-
-#endif
--
2.39.1.456.gfc5497dd1b-goog
