* Not specifying reg-shift creates a situation where the register
shift is unknown and can only be decoded via special compat
cases.
* The device tree specification states:
"...reg-shift. If unspecified, the default value is 0."
https://devicetree-specification.readthedocs.io/en/latest/chapter4-device-bindings.html
* Since the reg-shift for the SiFive boards is *NOT* 0, it shall
be defined as 2
---
arch/riscv/dts/fu540-c000.dtsi | 1 +
arch/riscv/dts/fu740-c000.dtsi | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/riscv/dts/fu540-c000.dtsi b/arch/riscv/dts/fu540-c000.dtsi
index 7db8610534..0bea8cf1e5 100644
--- a/arch/riscv/dts/fu540-c000.dtsi
+++ b/arch/riscv/dts/fu540-c000.dtsi
@@ -161,6 +161,7 @@
uart0: serial@10010000 {
compatible = "sifive,fu540-c000-uart", "sifive,uart0";
reg = <0x0 0x10010000 0x0 0x1000>;
+ reg-shift = <2>;
interrupt-parent = <&plic0>;
interrupts = <4>;
clocks = <&prci PRCI_CLK_TLCLK>;
diff --git a/arch/riscv/dts/fu740-c000.dtsi b/arch/riscv/dts/fu740-c000.dtsi
index 7b77c13496..19da3709f0 100644
--- a/arch/riscv/dts/fu740-c000.dtsi
+++ b/arch/riscv/dts/fu740-c000.dtsi
@@ -164,6 +164,7 @@
uart0: serial@10010000 {
compatible = "sifive,fu740-c000-uart", "sifive,uart0";
reg = <0x0 0x10010000 0x0 0x1000>;
+ reg-shift = <2>;
interrupt-parent = <&plic0>;
interrupts = <39>;
clocks = <&prci FU740_PRCI_CLK_PCLK>;
@@ -172,6 +173,7 @@
uart1: serial@10011000 {
compatible = "sifive,fu740-c000-uart", "sifive,uart0";
reg = <0x0 0x10011000 0x0 0x1000>;
+ reg-shift = <2>;
interrupt-parent = <&plic0>;
interrupts = <40>;
clocks = <&prci FU740_PRCI_CLK_PCLK>;
--
2.39.1
