Hi Tony, Am 2023-02-01 02:11, schrieb Tony Dinh:
When DM_SERIAL is enabled, the device-tree property dm-pre-reloc is required to boot over UART with kwboot. Enable this in a Kirkwood common u-boot dtsi.
My (dev) board unfortunately, have a bootloader which can't boot over serial. Could you elaborate that a bit more? Why is this required for uart boot? kwboot will talk with the bootrom why does u-boot need anything? Or will there just be no output until the uart is initialized?
Signed-off-by: Tony Dinh <mibo...@gmail.com> --- arch/arm/dts/kirkwood-u-boot.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 arch/arm/dts/kirkwood-u-boot.dtsi
Is this new? AFAIK only <boardname>-u-boot.dtsi is included automatically. -michael
