From: Jan Kiszka <jan.kis...@siemens.com> Use external blob otpcmd.bin to replace the 0xff filled OTP programming command block to create a firmware image that provisions the OTP on first boot. This otpcmd.bin is generated from the customer keys using steps described in the meta-iot2050 integration layer for the device.
Based on original patch by Baocheng Su. Signed-off-by: Jan Kiszka <jan.kis...@siemens.com> --- arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 9 +++++++++ board/siemens/iot2050/Kconfig | 7 +++++++ doc/board/siemens/iot2050.rst | 8 ++++++++ tools/binman/missing-blob-help | 8 ++++++++ 4 files changed, 32 insertions(+) diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi index 9082a79a034..a2fc8bbc123 100644 --- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi +++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi @@ -111,10 +111,19 @@ }; /* OTP update command block */ +#if CONFIG_IOT2050_EMBED_OTPCMD + blob-ext@0x6c0000 { + offset = <0x6c0000>; + size = <0x010000>; + filename = "otpcmd.bin"; + missing-msg = "iot2050-otpcmd"; + }; +#else fill@0x6c0000 { offset = <0x6c0000>; size = <0x010000>; fill-byte = [ff]; }; +#endif }; }; diff --git a/board/siemens/iot2050/Kconfig b/board/siemens/iot2050/Kconfig index a2b40881d11..e66b2427d95 100644 --- a/board/siemens/iot2050/Kconfig +++ b/board/siemens/iot2050/Kconfig @@ -49,4 +49,11 @@ config IOT2050_BOOT_SWITCH bool "Disable eMMC boot via USER button (Advanced version only)" default y +config IOT2050_EMBED_OTPCMD + bool "Embed OTP programming data" + help + Embed signed OTP programming data 'otpcmd.bin' into the firmware + image. This data will be evaluated and executed on first boot of the + device. + endif diff --git a/doc/board/siemens/iot2050.rst b/doc/board/siemens/iot2050.rst index 4e0925c72c9..cb49a0e36bf 100644 --- a/doc/board/siemens/iot2050.rst +++ b/doc/board/siemens/iot2050.rst @@ -27,6 +27,14 @@ The following binaries from that source need to be present in the build folder: - seboot_pg1.bin - seboot_pg2.bin +For building an image containing the OTP key provisioning data, below binary +needs to be present in the build folder: + + - otpcmd.bin + +Regarding how to generating this otpcmd.bin, please refer to: +https://github.com/siemens/meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otpcmd.sh + Building -------- diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help index 5bb8961ce03..7e88cd03954 100644 --- a/tools/binman/missing-blob-help +++ b/tools/binman/missing-blob-help @@ -23,6 +23,14 @@ See the documentation for IOT2050 board. Your image is missing SEBoot which is mandatory for board startup. Prebuilt SEBoot located at meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin. +iot2050-otpcmd: +See the documentation for IOT2050 board. Your image is missing OTP command data +block which is used for provisioning the customer keys to the board. +Please refer to +meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otpcmd.sh +for how to generate this binary. If you are not using secure boot or do not +intend to provision the keys, disable CONFIG_IOT2050_EMBED_OTPCMD. + k3-rti-wdt-firmware: If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for the R5F core(s) to trigger the system reset. One possible source is -- 2.35.3