On 18.01.23 09:11, Yanhong Wang wrote: > This series of patches base on the latest branch/master, and add support > for the StarFive JH7110 RISC-V SoC and VisionFive V2 board. In order for > this to be achieved, the respective DT nodes have been added, and the > required defconfigs have been added to the boards' defconfig. What is more, > the basic required DM drivers have been added, such as reset, clock, pinctrl, > uart, ram etc. > > Note that the register base address of reset controller is same with the > clock controller. Therefore, there is no device tree node alone for reset > driver. It binds device node in the clock driver. > > The u-boot-spl and u-boot has been tested on the VisionFive V2 boards which > equip with JH7110 SoC and works normally. > > For more information and support, you can visit RVspace wiki[1]. > > [1] https://wiki.rvspace.org/
I'm missing a doc/board/starfive/visionfive2.rst in this, similar to what we did with doc/board/siemens/iot2050.rst (and many others as well). I would also suggest adding binman support so that a flash.bin (or however you call it) is generated that contains the completely ingrated firmware, consisting of U-Boot SPL, OpenSBI and U-Boot proper. Would avoid having to model the details downstream in Yocto, Isar, etc. Jan -- Siemens AG, Technology Competence Center Embedded Linux
