Hi Stefan, Looks like I botched this V2 patch :) I will resend it.
Thanks, Tony On Sun, Feb 5, 2023 at 1:29 PM Tony Dinh <mibo...@gmail.com> wrote: > > Currently, only the 1st SATA port is powered up (by GPIO1 12). > Add GPIO1 13 in board initialization to power up the 2nd SATA port. > > Note that this patch depends on the initial add-support patch: > https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibo...@gmail.com/ > > Signed-off-by: Tony Dinh <mibo...@gmail.com> > --- > > board/thecus/n2350/n2350.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/thecus/n2350/n2350.c b/board/thecus/n2350/n2350.c > index 4cfdfba662..58028a0695 100644 > --- a/board/thecus/n2350/n2350.c > +++ b/board/thecus/n2350/n2350.c > @@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR; > #define N2350_GPP_OUT_ENA_LOW (~(BIT(20) | BIT(21) | BIT(24))) > #define N2350_GPP_OUT_ENA_MID (~(BIT(12) | BIT(13) | BIT(16) | BIT(19) | > BIT(22))) > #define N2350_GPP_OUT_VAL_LOW 0x1200000 > -#define N2350_GPP_OUT_VAL_MID 0x1001 > +#define N2350_GPP_OUT_VAL_MID 0x3001 > #define N2350_GPP_POL_LOW 0x0 > #define N2350_GPP_POL_MID 0x0 > > -- > 2.30.2 >