On Wed, Feb 01, 2023 at 12:16:13AM +0100, Linus Walleij wrote: > Add a command to load SEAMA (Seattle Image), a NAND flash > on-flash storage format. > > This type of flash image is found in some D-Link routers such > as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and > DCH-M225, as well as in WD and NEC routers on the ath79 > (MIPS), Broadcom BCM53xx, and RAMIPS platforms. > > This U-Boot command will read and decode a SEAMA image from > raw NAND flash on any platform. As it is always using big endian > format for the data decoding is always necessary on platforms > such as ARM. > > The command is needed to read a SEAMA-encoded boot image on the > D-Link DIR-890L router for boot from NAND flash in an upcoming > port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx) > architecture. > > A basic test and documentation is added as well. The test must > be run on a target with NAND flash support and at least one > resident SEAMA image in flash. > > Cc: Rafał Miłecki <ra...@milecki.pl> > Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: PGP signature
