The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs
an adjustment on the BUCK and LDO values.
Add the initial regulators values in -u-boot.dtsi & run the initial
regulator setup in a new odroid-go-ultra board.
Proper OTG and BOOST regulators are still missing to have USB-A
host properly working.
Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org>
---
.../arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi | 8 ++++++++
board/amlogic/odroid-go-ultra/MAINTAINERS | 7 +++++++
board/amlogic/odroid-go-ultra/Makefile | 5 +++++
board/amlogic/odroid-go-ultra/odroid-go-ultra.c | 22 ++++++++++++++++++++++
configs/odroid-go-ultra_defconfig | 4 ++--
5 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi
b/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi
index 00852f5e54..1c0f9765eb 100644
--- a/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi
+++ b/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi
@@ -14,3 +14,11 @@
&usb3_pcie_phy {
/delete-property/ phy-supply;
};
+
+&vcc_2v3 {
+ regulator-init-microvolt = <2400000>;
+};
+
+&vdd_ee {
+ regulator-init-microvolt = <875000>;
+};
diff --git a/board/amlogic/odroid-go-ultra/MAINTAINERS
b/board/amlogic/odroid-go-ultra/MAINTAINERS
new file mode 100644
index 0000000000..c22951b4e7
--- /dev/null
+++ b/board/amlogic/odroid-go-ultra/MAINTAINERS
@@ -0,0 +1,7 @@
+ODROID-GO-ULTRA
+M: Neil Armstrong <neil.armstr...@linaro.org>
+S: Maintained
+L: u-boot-amlo...@groups.io
+F: board/amlogic/odroid-go-ultra
+F: configs/odroid-go-ultra_defconfig
+F: doc/board/amlogic/odroid-go-ultra.rst
diff --git a/board/amlogic/odroid-go-ultra/Makefile
b/board/amlogic/odroid-go-ultra/Makefile
new file mode 100644
index 0000000000..8ebaa0c215
--- /dev/null
+++ b/board/amlogic/odroid-go-ultra/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2023 Neil Armstrong <neil.armstr...@linaro.org>
+
+obj-y := odroid-go-ultra.o
diff --git a/board/amlogic/odroid-go-ultra/odroid-go-ultra.c
b/board/amlogic/odroid-go-ultra/odroid-go-ultra.c
new file mode 100644
index 0000000000..bbd23e20fc
--- /dev/null
+++ b/board/amlogic/odroid-go-ultra/odroid-go-ultra.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Neil Armstrong <neil.armstr...@linaro.org>
+ */
+
+#include <common.h>
+#include <asm/arch/boot.h>
+#include <power/regulator.h>
+
+int mmc_get_env_dev(void)
+{
+ if (meson_get_boot_device() == BOOT_DEVICE_EMMC)
+ return 1;
+ return 0;
+}
+
+int board_init(void)
+{
+ regulators_enable_boot_on(_DEBUG);
+
+ return 0;
+}
diff --git a/configs/odroid-go-ultra_defconfig
b/configs/odroid-go-ultra_defconfig
index a4d349fba4..c71c82dd1d 100644
--- a/configs/odroid-go-ultra_defconfig
+++ b/configs/odroid-go-ultra_defconfig
@@ -1,5 +1,5 @@
CONFIG_ARM=y
-CONFIG_SYS_BOARD="w400"
+CONFIG_SYS_BOARD="odroid-go-ultra"
CONFIG_ARCH_MESON=y
CONFIG_TEXT_BASE=0x01000000
CONFIG_NR_DRAM_BANKS=1
@@ -17,7 +17,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
CONFIG_REMAKE_ELF=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_MISC_INIT_R=y
CONFIG_SYS_MAXARGS=32
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
@@ -27,6 +26,7 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
---
base-commit: d1f5dbe6645ad51e318dd322033fe6a08bce357b
change-id: 20230210-u-boot-odroid-go-ultra-pmics-setup-0e79dad28de6
Best regards,
--
Neil Armstrong <neil.armstr...@linaro.org>
