On Thu, Feb 02, 2023 at 12:37:45AM +0100, Linus Walleij wrote: > This adds a simple Northstar "BRCMNS" board to be used with > the BCM4709x and BCM5301x chips. > > The main intention is to use this with the D-Link DIR-890L > and DIR-885L routers for loading the kernel into RAM from > NAND memory using the BCH-1 ECC and using the separately > submitted SEAMA load command, so we are currently not adding > support for things such as networking. > > If other board need other ECC for example, they need to > create a separate DTS file and augment the code, but I don't > know if any other users will turn up. > > Cc: Rafał Miłecki <ra...@milecki.pl> > Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
As it stands, this fails to link: arm: + bcmns +(bcmns) arm-linux-gnueabi-ld.bfd: drivers/mtd/nand/raw/nand.o: in function `nand_init': +(bcmns) drivers/mtd/nand/raw/nand.c:159: undefined reference to `board_nand_init' +(bcmns) make[1]: *** [Makefile:1752: u-boot] Error 1 +(bcmns) make: *** [Makefile:177: sub-make] Error 2 -- Tom
signature.asc
Description: PGP signature