[PATCH 2/2] mx53loco: Add DM_I2C support

[Fabio Estevam]

The conversion to DM_I2C is mandatory, so add support
for it.

Signed-off-by: Fabio Estevam <feste...@denx.de>
---
 board/freescale/mx53loco/mx53loco.c | 36 ++++++++++++++---------------
 configs/mx53loco_defconfig          |  2 +-
 2 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/board/freescale/mx53loco/mx53loco.c 
b/board/freescale/mx53loco/mx53loco.c
index d447ad840a..a2aed44fbb 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -27,6 +27,8 @@
 #include <fsl_pmic.h>
 #include <linux/fb.h>
 #include <ipu_pixfmt.h>
+#include <dm/uclass.h>
+#include <dm/device.h>
 
 #define MX53LOCO_LCD_POWER             IMX_GPIO_NR(3, 24)
 
@@ -39,10 +41,16 @@ u32 get_board_rev(void)
        struct fuse_bank *bank = &iim->bank[0];
        struct fuse_bank0_regs *fuse =
                (struct fuse_bank0_regs *)bank->fuse_regs;
+       struct udevice *bus;
+       struct udevice *dev;
 
        int rev = readl(&fuse->gp[6]);
 
-       if (!i2c_probe(CFG_SYS_DIALOG_PMIC_I2C_ADDR))
+       ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus);
+       if (ret)
+               return ret;
+
+       if (!dm_i2c_probe(bus, CFG_SYS_DIALOG_PMIC_I2C_ADDR, 0, &dev))
                rev = 0;
 
        return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
@@ -62,26 +70,19 @@ static void setup_iomux_uart(void)
        imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
 }
 
-#define I2C_PAD_CTRL   (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
-                        PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
-       static const iomux_v3_cfg_t i2c1_pads[] = {
-               NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL),
-               NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL),
-       };
-
-       imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
-}
-
 static int power_init(void)
 {
        unsigned int val;
        int ret;
        struct pmic *p;
+       struct udevice *bus;
+       struct udevice *dev;
+
+       ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus);
+       if (ret)
+               return ret;
 
-       if (!i2c_probe(CFG_SYS_DIALOG_PMIC_I2C_ADDR)) {
+       if (!dm_i2c_probe(bus, CFG_SYS_DIALOG_PMIC_I2C_ADDR, 0, &dev)) {
                ret = pmic_dialog_init(I2C_PMIC);
                if (ret)
                        return ret;
@@ -124,8 +125,8 @@ static int power_init(void)
                return ret;
        }
 
-       if (!i2c_probe(CFG_SYS_FSL_PMIC_I2C_ADDR)) {
-               ret = pmic_init(I2C_0);
+       if (!dm_i2c_probe(bus, CFG_SYS_FSL_PMIC_I2C_ADDR, 0, &dev)) {
+               ret = pmic_init(0);
                if (ret)
                        return ret;
 
@@ -225,7 +226,6 @@ int board_init(void)
        gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
        mxc_set_sata_internal_clock();
-       setup_iomux_i2c();
 
        return 0;
 }
diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig
index e332c930b9..f497ccf9e9 100644
--- a/configs/mx53loco_defconfig
+++ b/configs/mx53loco_defconfig
@@ -44,7 +44,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="FEC0"
 CONFIG_ARP_TIMEOUT=200
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MXC=y
 CONFIG_FSL_ESDHC_IMX=y
 CONFIG_MTD=y
-- 
2.25.1