Hi Stefan, On Wed, Feb 15, 2023 at 08:03:14PM +0100, Stefan Agner wrote: > If the CROS device class is not compiled in, uclass returns not > supported. Ignore this case as well. > > This avoids boot failures on ODROID-XU4 without CONFIG_CROS_EC > ending with: > cros-ec communications failure -96 > Please reset with Power+Refresh > Cannot init cros-ec device
Thanks, the same issue happens on odroid-u2 (and probably other devices as well), issue was reported in https://lists.denx.de/pipermail/u-boot/2023-January/504115.html, and I sent an identical patch in https://lists.denx.de/pipermail/u-boot/2023-February/508929.html. Best regards, Henrik Grimler > Signed-off-by: Stefan Agner <ste...@agner.ch> > --- > board/samsung/common/board.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c > index 16ce5cb892..663d7ca991 100644 > --- a/board/samsung/common/board.c > +++ b/board/samsung/common/board.c > @@ -223,7 +223,7 @@ int board_late_init(void) > char mmcbootdev_str[16]; > > ret = uclass_first_device_err(UCLASS_CROS_EC, &dev); > - if (ret && ret != -ENODEV) { > + if (ret && ret != -ENODEV && ret != -EPFNOSUPPORT) { > /* Force console on */ > gd->flags &= ~GD_FLG_SILENT; > > -- > 2.39.1 >