From: Manoj Sai <abbaraju.manoj...@amarulasolutions.com> RK3568 has two USB 2.0 PHYs, and each PHY has two ports, the OTG port of PHY0 support OTG mode with charging detection function, they are similar to previous Rockchip SoCs.
However, there are three different designs for RK3568 USB 2.0 PHY. 1. RK3568 uses independent USB GRF module for each USB 2.0 PHY. 2. RK3568 accesses the registers of USB 2.0 PHY IP directly by APB. 3. The two ports of USB 2.0 PHY share one interrupt. This patch only PHY1 with necessary attributes required to function USBPHY1 on U-Boot. Co-developed-by: Ren Jianing <jianing....@rock-chips.com> Signed-off-by: Ren Jianing <jianing....@rock-chips.com> Co-developed-by: Jagan Teki <ja...@amarulasolutions.com> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> Signed-off-by: Manoj Sai <abbaraju.manoj...@amarulasolutions.com> --- drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index a01148db22..55e1dbcfef 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -298,11 +298,65 @@ static const struct rockchip_usb2phy_cfg rk3399_usb2phy_cfgs[] = { { /* sentinel */ } }; +static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = { + { + .reg = 0xfe8a0000, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x0000, 8, 0, 0x052, 0x1d1 }, + .bvalid_det_en = { 0x0080, 2, 2, 0, 1 }, + .bvalid_det_st = { 0x0084, 2, 2, 0, 1 }, + .bvalid_det_clr = { 0x0088, 2, 2, 0, 1 }, + .ls_det_en = { 0x0080, 0, 0, 0, 1 }, + .ls_det_st = { 0x0084, 0, 0, 0, 1 }, + .ls_det_clr = { 0x0088, 0, 0, 0, 1 }, + .utmi_avalid = { 0x00c0, 10, 10, 0, 1 }, + .utmi_bvalid = { 0x00c0, 9, 9, 0, 1 }, + .utmi_ls = { 0x00c0, 5, 4, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 }, + .ls_det_en = { 0x0080, 1, 1, 0, 1 }, + .ls_det_st = { 0x0084, 1, 1, 0, 1 }, + .ls_det_clr = { 0x0088, 1, 1, 0, 1 }, + .utmi_ls = { 0x00c0, 17, 16, 0, 1 }, + .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 } + } + }, + }, + { + .reg = 0xfe8b0000, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x0000, 8, 0, 0x1d2, 0x1d1 }, + .ls_det_en = { 0x0080, 0, 0, 0, 1 }, + .ls_det_st = { 0x0084, 0, 0, 0, 1 }, + .ls_det_clr = { 0x0088, 0, 0, 0, 1 }, + .utmi_ls = { 0x00c0, 5, 4, 0, 1 }, + .utmi_hstdet = { 0x00c0, 7, 7, 0, 1 } + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 }, + .ls_det_en = { 0x0080, 1, 1, 0, 1 }, + .ls_det_st = { 0x0084, 1, 1, 0, 1 }, + .ls_det_clr = { 0x0088, 1, 1, 0, 1 }, + .utmi_ls = { 0x00c0, 17, 16, 0, 1 }, + .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + static const struct udevice_id rockchip_usb2phy_ids[] = { { .compatible = "rockchip,rk3399-usb2phy", .data = (ulong)&rk3399_usb2phy_cfgs, }, + { + .compatible = "rockchip,rk3568-usb2phy", + .data = (ulong)&rk3568_phy_cfgs, + }, { /* sentinel */ } }; -- 2.25.1