[PATCH v3] Let the EQoS in imx8mp handle fixed-phy too.

[Elmar Psilog]

Without that patch it lost track to the node to scan
speed and duplex.
Patch was created by Marek Vasut, just tested by me.

Signed-off-by: Elmar Psilog <epsi at gmx.de>
Reviewed-by: Marek Vasut <marex at denx.de>
---
  changes v2: fix format issues
  changes v3: remove {} around single if, add reviewd..

 drivers/net/dwc_eth_qos.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 112deb546d..b9de205b8a 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -788,9 +788,21 @@ static int eqos_start(struct udevice *dev)
         */
        if (!eqos->phy) {
                int addr = -1;
-               addr = eqos_get_phy_addr(eqos, dev);
-               eqos->phy = phy_connect(eqos->mii, addr, dev,
-                                       eqos->config->interface(dev));
+               ofnode fixed_node;
+
+               if (IS_ENABLED(CONFIG_PHY_FIXED)) {
+                       fixed_node = ofnode_find_subnode(dev_ofnode(dev),
+                                                        "fixed-link");
+                       if (ofnode_valid(fixed_node))
+                               eqos->phy = fixed_phy_create(dev_ofnode(dev));
+               }
+
+               if (!eqos->phy) {
+                       addr = eqos_get_phy_addr(eqos, dev);
+                       eqos->phy = phy_connect(eqos->mii, addr, dev,
+                                               eqos->config->interface(dev));
+               }
+
                if (!eqos->phy) {
                        pr_err("phy_connect() failed");
                        goto err_stop_resets;
--
2.34.1