Bad block table option is hardcoded to read from flash with
NAND_BBT_USE_FLASH option. This decision should be done based on DT
property. Remove this hardcoding, to be able to use DT property.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.s...@amd.com>
---
drivers/mtd/nand/raw/arasan_nfc.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/arasan_nfc.c
b/drivers/mtd/nand/raw/arasan_nfc.c
index 4621bfb03e..ddb4cb1cba 100644
--- a/drivers/mtd/nand/raw/arasan_nfc.c
+++ b/drivers/mtd/nand/raw/arasan_nfc.c
@@ -1248,7 +1248,6 @@ static int arasan_probe(struct udevice *dev)
/* Buffer read/write routines */
nand_chip->read_buf = arasan_nand_read_buf;
nand_chip->write_buf = arasan_nand_write_buf;
- nand_chip->bbt_options = NAND_BBT_USE_FLASH;
writel(0x0, &info->reg->cmd_reg);
writel(0x0, &info->reg->pgm_reg);
--
2.17.1
