Hi Pali,
On 3/4/23 11:50, Pali Rohár wrote:
Improve code for checking strapping pins which specifies boot mode source.
Martin, could you test if Clearfog can be still configured into UART
booting mode via HW switches and if it still works correctly? First
patch is reverting UART related commit for Clearfog which I think it not
needed anymore.
Also could you check if SATA booting is still working correctly?
Tony, should address problems with SPI booting when it is configured to
different configuration. In fourth commit I added all possible boot mode
strapping pin configurations which are recognized by A385 bootrom (and
not the only one described in the HW spec, which is incomplete).
Stefan, do you have some AXP board with SATA boot source? Because I'm
adding it for completeness in the last sixth patch.
No, theadorable only boots from SPI NOR.
Thanks,
Stefan
