Hi Jan, On Tue, 28 Feb 2023 at 11:21, Jan Kiszka <jan.kis...@siemens.com> wrote: > > From: Jan Kiszka <jan.kis...@siemens.com> > > There are many ways to get a signed firmware for the IOT2050 devices, > namely for the parts under user-control. This script documents one way > of doing it, given a signing key. Augment the board documentation with > the required procedure around it. > > Signed-off-by: Jan Kiszka <jan.kis...@siemens.com> > --- > doc/board/siemens/iot2050.rst | 52 +++++++++++++++++++++++++++++++++++ > tools/iot2050-sign-fw.sh | 51 ++++++++++++++++++++++++++++++++++ > 2 files changed, 103 insertions(+) > create mode 100755 tools/iot2050-sign-fw.sh
I sent a series which: - attempts to do this with binman (providing x509 support) - allows use of 'binman replace' in your script, by enhancing support for updating sections Please take a look at see what you think. Regards, SImon