On 1/5/23 23:28, Marek Vasut wrote: > The eMMC HW partition 0 and 7 both mean USER HW partition. Use this as > a mean of propagating A/B copy selection within USER HW partition. The > spl_mmc_get_uboot_raw_sector() can detect that a USER HW partition is > in use and based on whether it is 0 or 7, select appropriate sector to > load from. > > Signed-off-by: Fedor Ross <fedor.r...@ifm.com> > Signed-off-by: Marek Vasut <ma...@denx.de>
Applied to u-boot-mmc/master. Best Regards, Jaehoon Chung > --- > Cc: Jaehoon Chung <jh80.ch...@samsung.com> > Cc: Peng Fan <peng....@nxp.com> > --- > common/spl/spl_mmc.c | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c > index 8a0c7331267..d634ccb0b9a 100644 > --- a/common/spl/spl_mmc.c > +++ b/common/spl/spl_mmc.c > @@ -420,7 +420,7 @@ int spl_mmc_load(struct spl_image_info *spl_image, > static struct mmc *mmc; > u32 boot_mode; > int err = 0; > - __maybe_unused int hw_part = 0; > + __maybe_unused int part, hw_part = 0; > int mmc_dev; > > /* Perform peripheral init only once for an mmc device */ > @@ -445,11 +445,12 @@ int spl_mmc_load(struct spl_image_info *spl_image, > switch (boot_mode) { > case MMCSD_MODE_EMMCBOOT: > hw_part = spl_mmc_emmc_boot_partition(mmc); > + part = hw_part == 7 ? 0 : hw_part; > > if (CONFIG_IS_ENABLED(MMC_TINY)) > - err = mmc_switch_part(mmc, hw_part); > + err = mmc_switch_part(mmc, part); > else > - err = blk_dselect_hwpart(mmc_get_blk_desc(mmc), > hw_part); > + err = blk_dselect_hwpart(mmc_get_blk_desc(mmc), part); > > if (err) { > #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT > @@ -479,7 +480,7 @@ int spl_mmc_load(struct spl_image_info *spl_image, > #endif > #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR > err = mmc_load_image_raw_sector(spl_image, bootdev, mmc, > - raw_sect + spl_mmc_raw_uboot_offset(hw_part)); > + raw_sect + spl_mmc_raw_uboot_offset(part)); > if (!err) > return err; > #endif