This config is based on colibri_imx6_defconfig and enables additionally
the watchdog. The intend of the new config is that distros can use this
in the future and the behaviour will not be changed for current users.
However I am not sure if it would be OK, to just enable the watchdog in
the existing colibri_imx6_defconfig. Any suggestions?
Signed-off-by: Andreas Aegerter <andreas.aeger...@mt.com>
---
board/toradex/colibri_imx6/MAINTAINERS | 4 +
configs/colibri_imx6_wdg_defconfig | 124 +++++++++++++++++++++++++
2 files changed, 128 insertions(+)
create mode 100644 configs/colibri_imx6_wdg_defconfig
diff --git a/board/toradex/colibri_imx6/MAINTAINERS
b/board/toradex/colibri_imx6/MAINTAINERS
index f7a5ad59f8..631d819f0b 100644
--- a/board/toradex/colibri_imx6/MAINTAINERS
+++ b/board/toradex/colibri_imx6/MAINTAINERS
@@ -9,3 +9,7 @@ F: configs/colibri_imx6_defconfig
F: arch/arm/dts/imx6dl-colibri-eval-v3.dts
F: arch/arm/dts/imx6dl-colibri-eval-v3-u-boot.dtsi
F: arch/arm/dts/imx6qdl-colibri.dtsi
+
+M: Andreas Aegerter <andreas.aeger...@mt.com>
+S: Maintained
+F: configs/colibri_imx6_wdg_defconfig
diff --git a/configs/colibri_imx6_wdg_defconfig
b/configs/colibri_imx6_wdg_defconfig
new file mode 100644
index 0000000000..3ba6e2ea8a
--- /dev/null
+++ b/configs/colibri_imx6_wdg_defconfig
@@ -0,0 +1,124 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0xFFFFDE00
+CONFIG_MX6DL=y
+CONFIG_MX6_DDRCAL=y
+CONFIG_TARGET_COLIBRI_IMX6=y
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-colibri-eval-v3"
+CONFIG_SPL_TEXT_BASE=0x00908000
+CONFIG_SYS_PROMPT="Colibri iMX6 # "
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL=y
+CONFIG_CMD_HDMIDETECT=y
+CONFIG_SYS_LOAD_ADDR=0x14200000
+CONFIG_SYS_MEMTEST_START=0x10000000
+CONFIG_SYS_MEMTEST_END=0x10010000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_MONITOR_LEN=409600
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTDELAY=1
+CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout
serial,vidconsole; setenv stdin serial,usbkbd"
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile
imx6dl-colibri-${fdt_board}.dtb"
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_MISC_INIT_R=y
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_SPL_DMA=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_USB_HOST=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+CONFIG_SYS_MAXARGS=48
+CONFIG_SYS_CBSIZE=1024
+CONFIG_SYS_PBSIZE=1056
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_BOOTCOUNT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_UUID=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_PART=1
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_IP_DEFRAG=y
+CONFIG_TFTP_BLOCKSIZE=16352
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.10.2"
+CONFIG_USE_NETMASK=y
+CONFIG_NETMASK="255.255.255.0"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.10.1"
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
+CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_SYS_MXC_I2C3_SPEED=400000
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_FSL_USDHC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_MXC_UART=y
+CONFIG_IMX_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_MAX_CONTROLLER_COUNT=2
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_WATCHDOG=y
+CONFIG_WDT=y
+#CONFIG_IMX_WATCHDOG=y
--
2.39.2
