On 2023/3/16 02:33, Johan Jonker wrote:
The rk3288 edp node has a phy node in Linux with a clock
property while current U-Boot driver expects this clock
on position index 1. Move U-Boot-specific DT clock properties
to rk3288-u-boot.dtsi and partially sync the edp node.

Signed-off-by: Johan Jonker <jbx6...@gmail.com>
Reviewed-by: Simon Glass <s...@chromium.org>
Tested-by: Simon Glass <s...@chromium.org>  # chromebook-jerry
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>

Thanks,
- Kever
---
  arch/arm/dts/rk3288-u-boot.dtsi |  5 +++++
  arch/arm/dts/rk3288.dtsi        | 17 +++++++++++------
  2 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/rk3288-u-boot.dtsi b/arch/arm/dts/rk3288-u-boot.dtsi
index e411445e..ca229150 100644
--- a/arch/arm/dts/rk3288-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-u-boot.dtsi
@@ -91,6 +91,11 @@
        u-boot,dm-pre-reloc;
  };

+&edp {
+       clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru PCLK_EDP_CTRL>;
+       clock-names = "clk_edp", "clk_edp_24m", "pclk_edp";
+};
+
  &gpio7 {
        u-boot,dm-pre-reloc;
  };
diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi
index f06d1f5b..9f924466 100644
--- a/arch/arm/dts/rk3288.dtsi
+++ b/arch/arm/dts/rk3288.dtsi
@@ -1177,19 +1177,24 @@
        };

        edp: dp@ff970000 {
-               compatible = "rockchip,rk3288-edp";
+               compatible = "rockchip,rk3288-dp";
                reg = <0xff970000 0x4000>;
                interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-               clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru 
PCLK_EDP_CTRL>;
-               clock-names = "clk_edp", "clk_edp_24m", "pclk_edp";
+               clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+               clock-names = "dp", "pclk";
+               phys = <&edp_phy>;
+               phy-names = "dp";
+               power-domains = <&power RK3288_PD_VIO>;
                resets = <&cru SRST_EDP>;
-               reset-names = "edp";
+               reset-names = "dp";
                rockchip,grf = <&grf>;
-               power-domains = <&power RK3288_PD_VIO>;
                status = "disabled";

                ports {
-                       edp_in: port {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       edp_in: port@0 {
+                               reg = <0>;
                                #address-cells = <1>;
                                #size-cells = <0>;
                                edp_in_vopb: endpoint@0 {
--
2.20.1

Reply via email to