On Wed, Mar 22, 2023 at 04:59:31PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <feste...@denx.de> > > After the conversion to DM_SERIAL in commit 01f372d8d62b ("udoo_neo: > Select DM_SERIAL and drop iomux board level init") the SPL log is gone > and the U-Boot proper log becomes incomplete: > > Core: 80 devices, 18 uclasses, devicetree: separate > MMC: FSL_SDHC: 1, FSL_SDHC: 2 > Loading Environment from MMC... OK > In: serial@2020000 > Out: serial@2020000 > Err: serial@2020000 > Net: eth0: ethernet@2188000 > Hit any key to stop autoboot: 0 > > Introduce the u-boot.dtsi file that passes the u-boot,dm-pre-reloc > properties to the relevant nodes so that UART can be used early in SPL. > > With this change, the complete SPL and U-Boot messages are seen again. > > Signed-off-by: Fabio Estevam <feste...@denx.de> > --- > arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi
Is this for master? If so, OK, we'll pick it up. If not, NAK, these are all bootph- properties now, and need to go upstream too. -- Tom
signature.asc
Description: PGP signature