This rearrange and remove duplicate defines to make the code cleaner.
There is no need to read vendor area1 and use an offset each time, it is
easier and clearer to just use the reg offset defined in TRM, same as
the other vendor regs.
This also removes use of the misspelled const for the RK3588 CMDOUT reg,
it will be re-added when support for RK3588 is introduced.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
drivers/mmc/rockchip_sdhci.c | 40 ++++++++++++------------------------
1 file changed, 13 insertions(+), 27 deletions(-)
diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c
index 9716fbb54dd4..bcf65e091741 100644
--- a/drivers/mmc/rockchip_sdhci.c
+++ b/drivers/mmc/rockchip_sdhci.c
@@ -47,46 +47,36 @@
#define ARASAN_VENDOR_REGISTER 0x78
#define ARASAN_VENDOR_ENHANCED_STROBE BIT(0)
-/* DWC IP vendor area 1 pointer */
-#define DWCMSHC_P_VENDOR_AREA1 0xe8
-#define DWCMSHC_AREA1_MASK GENMASK(11, 0)
-/* Offset inside the vendor area 1 */
-#define DWCMSHC_EMMC_CONTROL 0x2c
+/* Rockchip specific Registers */
+#define DWCMSHC_EMMC_EMMC_CTRL 0x52c
#define DWCMSHC_CARD_IS_EMMC BIT(0)
#define DWCMSHC_ENHANCED_STROBE BIT(8)
-
-/* Rockchip specific Registers */
#define DWCMSHC_EMMC_DLL_CTRL 0x800
#define DWCMSHC_EMMC_DLL_CTRL_RESET BIT(1)
#define DWCMSHC_EMMC_DLL_RXCLK 0x804
#define DWCMSHC_EMMC_DLL_TXCLK 0x808
#define DWCMSHC_EMMC_DLL_STRBIN 0x80c
-#define DECMSHC_EMMC_DLL_CMDOUT 0x810
#define DWCMSHC_EMMC_DLL_STATUS0 0x840
#define DWCMSHC_EMMC_DLL_STATUS1 0x844
#define DWCMSHC_EMMC_DLL_START BIT(0)
-#define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL 29
+#define DWCMSHC_EMMC_DLL_LOCKED BIT(8)
+#define DWCMSHC_EMMC_DLL_TIMEOUT BIT(9)
#define DWCMSHC_EMMC_DLL_START_POINT 16
#define DWCMSHC_EMMC_DLL_START_DEFAULT 5
#define DWCMSHC_EMMC_DLL_INC_VALUE 2
#define DWCMSHC_EMMC_DLL_INC 8
#define DWCMSHC_EMMC_DLL_BYPASS BIT(24)
#define DWCMSHC_EMMC_DLL_DLYENA BIT(27)
+#define DLL_RXCLK_NO_INVERTER BIT(29)
+#define DLL_RXCLK_ORI_GATE BIT(31)
#define DLL_TXCLK_TAPNUM_DEFAULT 0xA
-
+#define DLL_TXCLK_TAPNUM_FROM_SW BIT(24)
#define DLL_STRBIN_TAPNUM_DEFAULT 0x8
#define DLL_STRBIN_TAPNUM_FROM_SW BIT(24)
#define DLL_STRBIN_DELAY_NUM_SEL BIT(26)
#define DLL_STRBIN_DELAY_NUM_OFFSET 16
#define DLL_STRBIN_DELAY_NUM_DEFAULT 0x16
-#define DLL_TXCLK_TAPNUM_FROM_SW BIT(24)
-#define DWCMSHC_EMMC_DLL_LOCKED BIT(8)
-#define DWCMSHC_EMMC_DLL_TIMEOUT BIT(9)
-#define DLL_RXCLK_NO_INVERTER 1
-#define DLL_RXCLK_INVERTER 0
-#define DLL_RXCLK_ORI_GATE BIT(31)
-#define DWCMSHC_ENHANCED_STROBE BIT(8)
#define DLL_LOCK_WO_TMOUT(x) \
((((x) & DWCMSHC_EMMC_DLL_LOCKED) == DWCMSHC_EMMC_DLL_LOCKED) && \
(((x) & DWCMSHC_EMMC_DLL_TIMEOUT) == 0))
@@ -328,8 +318,7 @@ static int rk3568_sdhci_config_dll(struct sdhci_host *host,
u32 clock, bool enab
if (ret)
return ret;
- extra = DWCMSHC_EMMC_DLL_DLYENA |
- DLL_RXCLK_NO_INVERTER << DWCMSHC_EMMC_DLL_RXCLK_SRCSEL;
+ extra = DWCMSHC_EMMC_DLL_DLYENA | DLL_RXCLK_NO_INVERTER;
sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_RXCLK);
extra = DWCMSHC_EMMC_DLL_DLYENA |
@@ -346,10 +335,9 @@ static int rk3568_sdhci_config_dll(struct sdhci_host
*host, u32 clock, bool enab
* Disable DLL and reset both of sample and drive clock.
* The bypass bit and start bit need to be set if DLL is not
locked.
*/
- sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS |
DWCMSHC_EMMC_DLL_START,
- DWCMSHC_EMMC_DLL_CTRL);
+ extra = DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START;
+ sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_CTRL);
sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
- sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
/*
* Before switching to hs400es mode, the driver will enable
@@ -368,7 +356,7 @@ static int rk3568_sdhci_config_dll(struct sdhci_host *host,
u32 clock, bool enab
static int rk3568_sdhci_set_ios_post(struct sdhci_host *host)
{
struct mmc *mmc = host->mmc;
- u32 reg, vendor_reg;
+ u32 reg;
reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
reg &= ~SDHCI_CTRL_UHS_MASK;
@@ -400,9 +388,7 @@ static int rk3568_sdhci_set_ios_post(struct sdhci_host
*host)
sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
- vendor_reg = (sdhci_readl(host, DWCMSHC_P_VENDOR_AREA1) &
DWCMSHC_AREA1_MASK)
- + DWCMSHC_EMMC_CONTROL;
- reg = sdhci_readw(host, vendor_reg);
+ reg = sdhci_readw(host, DWCMSHC_EMMC_EMMC_CTRL);
if (IS_MMC(mmc))
reg |= DWCMSHC_CARD_IS_EMMC;
@@ -414,7 +400,7 @@ static int rk3568_sdhci_set_ios_post(struct sdhci_host
*host)
else
reg &= ~DWCMSHC_ENHANCED_STROBE;
- sdhci_writew(host, reg, vendor_reg);
+ sdhci_writew(host, reg, DWCMSHC_EMMC_EMMC_CTRL);
return 0;
}
--
2.40.0
