On Tue, Apr 04, 2023 at 03:59:56PM +0200, Heinrich Schuchardt wrote: > On 3/31/23 22:36, Judith Mendez wrote: > > List some common boot modes and their corresponding switch > > settings for AM62 SK. > > > > Signed-off-by: Judith Mendez <j...@ti.com> > > --- > > > > Changes from v1: Change table format from ascii-art to list-table > > > > doc/board/ti/am62x_sk.rst | 36 ++++++++++++++++++++++++++++++++++++ > > 1 file changed, 36 insertions(+) > > > > diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst > > index b1b7d99befb..3d85400b1a1 100644 > > --- a/doc/board/ti/am62x_sk.rst > > +++ b/doc/board/ti/am62x_sk.rst > > @@ -229,3 +229,39 @@ Image formats: > > | | SPL DTB 1...N | | > > | +-------------------+ | > > +-----------------------+ > > + > > +Switch Setting for Boot Mode > > +---------------------------- > > + > > +Boot Mode pins provide means to select the boot mode and options before the > > +device is powered up. After every POR, they are the main source to populate > > +the Boot Parameter Tables. > > + > > +The following table shows some common boot modes used on AM62 platform. > > More > > +details can be found in the Technical Reference Manual: > > +https://www.ti.com/lit/pdf/spruiv7 under the `Boot Mode Pins` section. > > + > > +.. list-table:: Boot Modes > > + :widths: 32 32 32 > > + :header-rows: 1 > > + > > + * - Switch Label > > + - SW2: 12345678 > > + - SW3: 12345678 > > + * - SD > > + - 01000000 > > + - 11000010 > > + * - OSPI > > + - 00000000 > > + - 11001110 > > + * - EMMC > > + - 00000000 > > + - 11010010 > > + * - UART > > + - 00000000 > > + - 11011100 > > + * - USB DFU > > + - 00000000 > > + - 11001010 > > Hello Judith, > > ReStructured text allows different flavors of formatting tables. > > The HTML output for the table above is correct but the .rst file is hard > to read in a text-editor. I would prefer: > > *Boot Modes* > > ============ ============= ============= > Switch Label SW2: 12345678 SW3: 12345678 > ============ ============= ============= > SD 01000000 11000010 > OSPI 00000000 11001110 > EMMC 00000000 11010010 > UART 00000000 11011100 > USB DFU 00000000 11001010 > ============ ============= =============
There's other list-table entires in the docs today. I'm fine either way, but we need to be consistent in the docs, and should update perhaps doc/develop/codingstyle.rst should get a section too on docs? -- Tom
signature.asc
Description: PGP signature