On 4/6/2023 7:51 AM, Marek Vasut wrote:
Synchronize the i.MX8M Mini Toradex Verdin based Menlo board config
with i.MX8M Mini Toradex Verdin carrier board. This enables DM MDIO,
eMMC HS modes, TMU for thermal monitoring, LTO and multiple commands
(hexdump, pmic, read, time).

Signed-off-by: Marek Vasut <ma...@denx.de>

Reviewed-by: Peng Fan <peng....@nxp.com>

---
Cc: Marek Vasut <ma...@denx.de>
Cc: Olaf Mandel <o.man...@menlosystems.com>
Cc: Peng Fan <peng....@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
---
  configs/imx8mm-mx8menlo_defconfig | 20 ++++++++++++++++++--
  1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/configs/imx8mm-mx8menlo_defconfig 
b/configs/imx8mm-mx8menlo_defconfig
index 0a374aab06d..0bd852a77b9 100644
--- a/configs/imx8mm-mx8menlo_defconfig
+++ b/configs/imx8mm-mx8menlo_defconfig
@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx8mm-mx8menlo"
  CONFIG_SPL_TEXT_BASE=0x7E1000
  CONFIG_TARGET_IMX8MM_MX8MENLO=y
  CONFIG_SYS_PROMPT="Verdin iMX8MM # "
+CONFIG_OF_LIBFDT_OVERLAY=y
  CONFIG_SPL_MMC=y
  CONFIG_SPL_SERIAL=y
  CONFIG_SPL_DRIVERS_MISC=y
@@ -24,6 +25,7 @@ CONFIG_ENV_OFFSET_REDUND=0xFFFFDE00
  CONFIG_SYS_LOAD_ADDR=0x40480000
  CONFIG_SYS_MEMTEST_START=0x40000000
  CONFIG_SYS_MEMTEST_END=0x80000000
+CONFIG_LTO=y
  CONFIG_SYS_MONITOR_LEN=524288
  CONFIG_FIT=y
  CONFIG_FIT_EXTERNAL_OFFSET=0x3000
@@ -61,18 +63,23 @@ CONFIG_SYS_PBSIZE=2081
  CONFIG_CMD_ASKENV=y
  # CONFIG_CMD_EXPORTENV is not set
  # CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
  CONFIG_CMD_MEMTEST=y
  CONFIG_CMD_CLK=y
  CONFIG_CMD_FUSE=y
  CONFIG_CMD_GPIO=y
  CONFIG_CMD_I2C=y
  CONFIG_CMD_MMC=y
+CONFIG_CMD_READ=y
  CONFIG_CMD_USB=y
  CONFIG_CMD_USB_SDP=y
  CONFIG_CMD_USB_MASS_STORAGE=y
  CONFIG_CMD_BOOTCOUNT=y
  CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
  CONFIG_CMD_UUID=y
+CONFIG_CMD_PMIC=y
  CONFIG_CMD_REGULATOR=y
  CONFIG_CMD_BTRFS=y
  CONFIG_CMD_EXT4_WRITE=y
@@ -87,7 +94,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  CONFIG_SYS_MMC_ENV_PART=1
  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
  CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="FEC"
+CONFIG_ETHPRIME="eth0"
  CONFIG_VERSION_VARIABLE=y
  CONFIG_IP_DEFRAG=y
  CONFIG_TFTP_BLOCKSIZE=4096
@@ -104,11 +111,19 @@ CONFIG_DM_I2C=y
  CONFIG_MISC=y
  CONFIG_I2C_EEPROM=y
  CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
  CONFIG_FSL_USDHC=y
  CONFIG_PHYLIB=y
  CONFIG_PHY_ADDR_ENABLE=y
  CONFIG_PHY_MICREL=y
  CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_MDIO=y
  CONFIG_FEC_MXC=y
  CONFIG_MII=y
  CONFIG_SPL_PHY=y
@@ -131,6 +146,7 @@ CONFIG_SPL_SYSRESET=y
  CONFIG_SYSRESET_PSCI=y
  CONFIG_SYSRESET_WATCHDOG=y
  CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
  CONFIG_USB=y
  CONFIG_USB_EHCI_HCD=y
  CONFIG_MXC_USB_OTG_HACTIVE=y
@@ -143,4 +159,4 @@ CONFIG_CI_UDC=y
  CONFIG_SDP_LOADADDR=0x40400000
  CONFIG_USB_GADGET_DOWNLOAD=y
  CONFIG_IMX_WATCHDOG=y
-CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_HEXDUMP=y

Reply via email to