On Fri, Apr 7, 2023 at 7:46 PM Tom Rini <tr...@konsulko.com> wrote: > On Fri, Apr 07, 2023 at 03:40:08PM +0200, Linus Walleij wrote: > > This adds a simple Northstar "BRCMNS" board to be used with > > the BCM4709x and BCM5301x chips. > > > > The main intention is to use this with the D-Link DIR-890L > > and DIR-885L routers for loading the kernel into RAM from > > NAND memory using the BCH-1 ECC and using the separately > > submitted SEAMA load command, so we are currently not adding > > support for things such as networking. > > > > If other board need other ECC for example, they need to > > create a separate DTS file and augment the code, but I don't > > know if any other users will turn up. > > > > Cc: Rafał Miłecki <ra...@milecki.pl> > > Signed-off-by: Linus Walleij <linus.wall...@linaro.org> > > --- > > ChangeLog v3->v4: > > - No changes > > ChangeLog v1->v3: > > - Bundle with the iproc nand and algo select patches > > --- > > arch/arm/Kconfig | 1 + > > arch/arm/dts/Makefile | 2 ++ > > arch/arm/dts/ns-board.dts | 57 ++++++++++++++++++++++++++++++ > > To be clear, what Linux kernel tag is this dts file from?
This is constructed for u-boot, it just contains a subset making U-boot work fine on any D-Link NorthStar device. It's similar to how we created "stemmy" for all U8500 Samsung phones. > And not a hard requirement at this time, but you should probably make a > plain text environment (see board/*/*/*.env) instead of EXTRA_SETTINGS. Hm news2me, I'll look into it! Yours, Linus Walleij