+Kumar, Udit <u-kum...@ti.com> On Thu, Apr 6, 2023 at 10:37 AM Sinthu Raja M < sinthu.r...@mistralsolutions.com> wrote:
> Hi, > > > On Fri, Mar 31, 2023 at 12:09 PM Sinthu Raja > <sinthu.r...@mistralsolutions.com> wrote: > > > > From: Sinthu Raja <sinthu.r...@ti.com> > > > > This resyncs the dts file of j721e-sk with the currently in-tree K3 > > platforms. Of note are that the main-navss/mcu-navss nodes were renamed > > to main_navss / mcu_navss and so the u-boot.dtsi file needed to be > > updated to match. > > > > Also, disable the HBMC which is not supported in the j721e-sk board. > > > > Fixes: 58d61fb5a7 ("arm: dts: k3-j721e-sk: Add initial A72 specific dts > support") > > Signed-off-by: Sinthu Raja <sinthu.r...@ti.com> > > --- > > arch/arm/dts/k3-j721e-sk-u-boot.dtsi | 8 ++++++-- > > 1 file changed, 6 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm/dts/k3-j721e-sk-u-boot.dtsi > b/arch/arm/dts/k3-j721e-sk-u-boot.dtsi > > index 0949caa129..31f979f3bb 100644 > > --- a/arch/arm/dts/k3-j721e-sk-u-boot.dtsi > > +++ b/arch/arm/dts/k3-j721e-sk-u-boot.dtsi > > @@ -33,7 +33,7 @@ > > &cbass_main{ > > bootph-pre-ram; > > > > - main_navss { > > + main_navss: bus@30000000 { > > bootph-pre-ram; > > }; > > }; > > @@ -49,7 +49,7 @@ > > bootph-pre-ram; > > }; > > > > - mcu-navss { > > + mcu_navss: bus@28380000 { > > bootph-pre-ram; > > > > ringacc@2b800000 { > > @@ -237,6 +237,10 @@ > > bootph-pre-ram; > > }; > > > > +&hbmc { > > + status = "disabled"; > > +}; > > + > Please review and let me know your comments. > > &ospi0 { > > bootph-pre-ram; > > > > -- > > 2.36.1 > > > > > -- > With Regards > Sinthu Raja > -- With Regards Sinthu Raja