Hi Neha, On Fri, 21 Apr 2023 at 06:33, Neha Malcom Francis <n-fran...@ti.com> wrote: > > Earlier documentation specified builds for generating bootloader images > using an external TI repository k3-image-gen and core-secdev-k3. Modify > this to using the binman flow so that user understands how to build the > final boot images. > > Signed-off-by: Neha Malcom Francis <n-fran...@ti.com> > --- > doc/board/ti/am62x_sk.rst | 20 ++++-------- > doc/board/ti/j721e_evm.rst | 37 ++++++++------------- > doc/board/ti/k3.rst | 67 ++++++++++---------------------------- > 3 files changed, 36 insertions(+), 88 deletions(-)
Reviewed-by: Simon Glass <s...@chromium.org> > > diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst > index b1b7d99bef..f5e0774899 100644 > --- a/doc/board/ti/am62x_sk.rst > +++ b/doc/board/ti/am62x_sk.rst > @@ -115,23 +115,19 @@ Below is the pictorial representation of boot flow: > > Sources: > -------- > -1. SYSFW: > - Tree: git://git.ti.com/k3-image-gen/k3-image-gen.git > - Branch: master > - > -2. ATF: > +1. ATF: > Tree: https://github.com/ARM-software/arm-trusted-firmware.git > Branch: master > > -3. OPTEE: > +2. OPTEE: > Tree: https://github.com/OP-TEE/optee_os.git > Branch: master > > -4. U-Boot: > +3. U-Boot: > Tree: https://source.denx.de/u-boot/u-boot > Branch: master > > -5. TI Linux Firmware: > +4. TI Linux Firmware: > Tree: git://git.ti.com/processor-firmware/ti-linux-firmware.git > Branch: ti-linux-firmware > > @@ -156,18 +152,14 @@ Build procedure: > .. code-block:: text > > $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- > am62x_evm_r5_defconfig O=/tmp/r5 > - $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- O=/tmp/r5 > - $ cd <k3-image-gen> > - $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- SOC=am62x > SBL=/tmp/r5/spl/u-boot-spl.bin SYSFW_PATH=<path to > ti-linux-firmware>/ti-sysfw/ti-fs-firmware-am62x-gp.bin > - > -Use the tiboot3.bin generated from last command > + $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- O=/tmp/r5 > BINMAN_INDIRS=<path/to/ti-linux-firmware> > > * 3.2 A53: > > .. code-block:: text > > $ make ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- > am62x_evm_a53_defconfig O=/tmp/a53 > - $ make ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- ATF=<path to ATF > dir>/build/k3/lite/release/bl31.bin TEE=<path to OPTEE OS > dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to > ti-linux-firmware>/ti-dm/am62xx/ipc_echo_testb_mcu1_0_release_strip.xer5f > O=/tmp/a53 > + $ make ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- BL31=<path to ATF > dir>/build/k3/lite/release/bl31.bin TEE=<path to OPTEE OS > dir>/out/arm-plat-k3/core/tee-pager_v2.bin > BINMAN_INDIRS=<path/to/ti-linux-firmware> > > Target Images > -------------- > diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst > index e898601c41..c90e2b8279 100644 > --- a/doc/board/ti/j721e_evm.rst > +++ b/doc/board/ti/j721e_evm.rst > @@ -130,67 +130,56 @@ support. Below is the pictorial representation of boot > flow: > > Sources: > -------- > -1. SYSFW: > - Tree: git://git.ti.com/k3-image-gen/k3-image-gen.git > - Branch: master > - > -2. ATF: > +1. ATF: > Tree: https://github.com/ARM-software/arm-trusted-firmware.git > Branch: master > > -3. OPTEE: > +2. OPTEE: > Tree: https://github.com/OP-TEE/optee_os.git > Branch: master > > -4. DM Firmware: > - Tree: git://git.ti.com/processor-firmware/ti-linux-firmware.git > - Branch: ti-linux-firmware > - > -5. U-Boot: > +3. U-Boot: > Tree: https://source.denx.de/u-boot/u-boot > Branch: master > > +4. TI Linux Firmware: > + Tree: git://git.ti.com/processor-firmware/ti-linux-firmware.git > + Branch: ti-linux-firmware > + > Build procedure: > ---------------- > -1. SYSFW: > - > -.. code-block:: bash > - > - make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e > - > -2. ATF: > +1. ATF: > > .. code-block:: bash > > make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 > TARGET_BOARD=generic SPD=opteed > > -3. OPTEE: > +2. OPTEE: > > .. code-block:: bash > > make PLATFORM=k3-j721e CFG_ARM64_core=y > > -4. U-Boot: > +3. U-Boot: > > * 4.1 R5: > > .. code-block:: bash > > make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5 > - make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5 > + make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5 > BINMAN_INDIRS=<path/to/ti-linux-firmware> > > * 4.2 A72: > > .. code-block:: bash > > make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72 > - make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF > dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS > dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM > firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72 > + make CROSS_COMPILE=aarch64-linux-gnu- BL31=<ATF > dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS > dir>/out/arm-plat-k3/core/tee-pager_v2.bin > BINMAN_INDIRS=<path/to/ti-linux-firmware> Is there an 'O=build/a72' missing there? You can combine these as well, by using 'j721e_evm_a72_defconfig all' to both configure and build. Also it might be nice to keep the line length shorter if you can. [..] Regards, Simon