From: Nishanth Menon <n...@ti.com>

Add erratum i2327 work around for initialization for RTC
interrupt where interrupt is stuck for ever at startup. Unfortunately,
this workaround needs to be applied under 1 second of boot.

Signed-off-by: Nishanth Menon <n...@ti.com>
[b...@ti.com: rebased from 2021.01]
Signed-off-by: Bryan Brattlof <b...@ti.com>
---
 arch/arm/mach-k3/am625_init.c | 44 +++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/mach-k3/am625_init.c b/arch/arm/mach-k3/am625_init.c
index a91c15ca4e188..e90c18fdcc118 100644
--- a/arch/arm/mach-k3/am625_init.c
+++ b/arch/arm/mach-k3/am625_init.c
@@ -15,6 +15,15 @@
 #include <dm/uclass-internal.h>
 #include <dm/pinctrl.h>
 
+#define RTC_BASE_ADDRESS               0x2b1f0000
+#define REG_K3RTC_S_CNT_LSW            (RTC_BASE_ADDRESS + 0x18)
+#define REG_K3RTC_KICK0                        (RTC_BASE_ADDRESS + 0x70)
+#define REG_K3RTC_KICK1                        (RTC_BASE_ADDRESS + 0x74)
+
+/* Magic values for lock/unlock */
+#define K3RTC_KICK0_UNLOCK_VALUE       0x83e70b13
+#define K3RTC_KICK1_UNLOCK_VALUE       0x95a4f1e0
+
 /*
  * This uninitialized global variable would normal end up in the .bss section,
  * but the .bss is cleared between writing and reading this variable, so move
@@ -71,6 +80,40 @@ static __maybe_unused void enable_mcu_esm_reset(void)
        writel(stat, CTRLMMR_MCU_RST_CTRL);
 }
 
+#if defined(CONFIG_CPU_V7R)
+
+/*
+ * RTC Erratum i2327 Workaround
+ * Due to a bug in initial synchronization out of cold power on,
+ * IRQ status can get locked infinitely if we do not:
+ * a) unlock RTC
+ *
+ * This workaround *must* be applied within 1 second of power on,
+ * So, this is closest point to be able to guarantee the max
+ * timing.
+ */
+void rtc_erratumi2327_init(void)
+{
+       u32 counter;
+
+       /*
+        * If counter has gone past 1, nothing we can do, leave
+        * system locked! This is the only way we know if RTC
+        * can be used for all practical purposes.
+        */
+       counter = readl(REG_K3RTC_S_CNT_LSW);
+       if (counter > 1)
+               return;
+       /*
+        * Need to set this up at the very start
+        * MUST BE DONE under 1 second of boot.
+        */
+       writel(K3RTC_KICK0_UNLOCK_VALUE, REG_K3RTC_KICK0);
+       writel(K3RTC_KICK1_UNLOCK_VALUE, REG_K3RTC_KICK1);
+       return;
+}
+#endif
+
 void board_init_f(ulong dummy)
 {
        struct udevice *dev;
@@ -78,6 +121,7 @@ void board_init_f(ulong dummy)
 
 #if defined(CONFIG_CPU_V7R)
        setup_k3_mpu_regions();
+       rtc_erratumi2327_init();
 #endif
 
        /*

base-commit: a25dcda452bf6a6de72764a8d990d72e5def643d
-- 
2.40.0

Reply via email to