On Sun, 22 Jan 2023 17:46:22 -0600
Samuel Holland <sam...@sholland.org> wrote:

> Now that this functionality is modeled using the device tree and
> regulator uclass, the named GPIO is not referenced anywhere. Remove it.
> 
> Signed-off-by: Samuel Holland <sam...@sholland.org>

There is indeed no config left that would set AXP0-VBUS-DETECT, so this
code is indeed no longer needed:

Reviewed-by: Andre Przywara <andre.przyw...@arm.com>

Queued for sunxi/master.

Cheers,
Andre

> ---
> 
>  arch/arm/include/asm/arch-sunxi/gpio.h |  1 -
>  drivers/gpio/axp_gpio.c                | 21 ++++-----------------
>  drivers/gpio/sunxi_gpio.c              |  6 +-----
>  include/axp209.h                       |  1 -
>  include/axp221.h                       |  1 -
>  include/axp809.h                       |  1 -
>  include/axp818.h                       |  1 -
>  7 files changed, 5 insertions(+), 27 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h 
> b/arch/arm/include/asm/arch-sunxi/gpio.h
> index 437e86479c..6eaeece4e2 100644
> --- a/arch/arm/include/asm/arch-sunxi/gpio.h
> +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
> @@ -209,7 +209,6 @@ enum sunxi_gpio_number {
>  
>  /* Virtual AXP0 GPIOs */
>  #define SUNXI_GPIO_AXP0_PREFIX "AXP0-"
> -#define SUNXI_GPIO_AXP0_VBUS_DETECT  4
>  #define SUNXI_GPIO_AXP0_VBUS_ENABLE  5
>  #define SUNXI_GPIO_AXP0_GPIO_COUNT   6
>  
> diff --git a/drivers/gpio/axp_gpio.c b/drivers/gpio/axp_gpio.c
> index 35585dc8ac..49672193ff 100644
> --- a/drivers/gpio/axp_gpio.c
> +++ b/drivers/gpio/axp_gpio.c
> @@ -36,18 +36,11 @@ static int axp_gpio_direction_input(struct udevice *dev, 
> unsigned pin)
>  {
>       u8 reg;
>  
> -     switch (pin) {
> -#ifndef CONFIG_AXP152_POWER /* NA on axp152 */
> -     case SUNXI_GPIO_AXP0_VBUS_DETECT:
> -             return 0;
> -#endif
> -     default:
> -             reg = axp_get_gpio_ctrl_reg(pin);
> -             if (reg == 0)
> -                     return -EINVAL;
> +     reg = axp_get_gpio_ctrl_reg(pin);
> +     if (reg == 0)
> +             return -EINVAL;
>  
> -             return pmic_bus_write(reg, AXP_GPIO_CTRL_INPUT);
> -     }
> +     return pmic_bus_write(reg, AXP_GPIO_CTRL_INPUT);
>  }
>  
>  static int axp_gpio_direction_output(struct udevice *dev, unsigned pin,
> @@ -83,12 +76,6 @@ static int axp_gpio_get_value(struct udevice *dev, 
> unsigned pin)
>       int ret;
>  
>       switch (pin) {
> -#ifndef CONFIG_AXP152_POWER /* NA on axp152 */
> -     case SUNXI_GPIO_AXP0_VBUS_DETECT:
> -             ret = pmic_bus_read(AXP_POWER_STATUS, &val);
> -             mask = AXP_POWER_STATUS_VBUS_PRESENT;
> -             break;
> -#endif
>  #ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
>       /* Only available on later PMICs */
>       case SUNXI_GPIO_AXP0_VBUS_ENABLE:
> diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c
> index 1e85db179a..f0b42e4fdb 100644
> --- a/drivers/gpio/sunxi_gpio.c
> +++ b/drivers/gpio/sunxi_gpio.c
> @@ -117,11 +117,7 @@ int sunxi_name_to_gpio(const char *name)
>  #if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO
>       char lookup[8];
>  
> -     if (strcasecmp(name, "AXP0-VBUS-DETECT") == 0) {
> -             sprintf(lookup, SUNXI_GPIO_AXP0_PREFIX "%d",
> -                     SUNXI_GPIO_AXP0_VBUS_DETECT);
> -             name = lookup;
> -     } else if (strcasecmp(name, "AXP0-VBUS-ENABLE") == 0) {
> +     if (strcasecmp(name, "AXP0-VBUS-ENABLE") == 0) {
>               sprintf(lookup, SUNXI_GPIO_AXP0_PREFIX "%d",
>                       SUNXI_GPIO_AXP0_VBUS_ENABLE);
>               name = lookup;
> diff --git a/include/axp209.h b/include/axp209.h
> index 414f88a32c..d8bf44f1fa 100644
> --- a/include/axp209.h
> +++ b/include/axp209.h
> @@ -77,7 +77,6 @@ enum axp209_reg {
>  #ifdef CONFIG_AXP209_POWER
>  #define AXP_POWER_STATUS             0x00
>  #define AXP_POWER_STATUS_ALDO_IN             BIT(0)
> -#define AXP_POWER_STATUS_VBUS_PRESENT                BIT(5)
>  #define AXP_GPIO0_CTRL                       0x90
>  #define AXP_GPIO1_CTRL                       0x92
>  #define AXP_GPIO2_CTRL                       0x93
> diff --git a/include/axp221.h b/include/axp221.h
> index 8dfcc5b5a2..32b988f3a9 100644
> --- a/include/axp221.h
> +++ b/include/axp221.h
> @@ -53,7 +53,6 @@
>  #ifdef CONFIG_AXP221_POWER
>  #define AXP_POWER_STATUS             0x00
>  #define AXP_POWER_STATUS_ALDO_IN             BIT(0)
> -#define AXP_POWER_STATUS_VBUS_PRESENT                BIT(5)
>  #define AXP_VBUS_IPSOUT                      0x30
>  #define AXP_VBUS_IPSOUT_DRIVEBUS             (1 << 2)
>  #define AXP_MISC_CTRL                        0x8f
> diff --git a/include/axp809.h b/include/axp809.h
> index 8082e402e2..71a7cb2aaa 100644
> --- a/include/axp809.h
> +++ b/include/axp809.h
> @@ -47,7 +47,6 @@
>  #ifdef CONFIG_AXP809_POWER
>  #define AXP_POWER_STATUS             0x00
>  #define AXP_POWER_STATUS_ALDO_IN             BIT(0)
> -#define AXP_POWER_STATUS_VBUS_PRESENT                BIT(5)
>  #define AXP_VBUS_IPSOUT                      0x30
>  #define AXP_VBUS_IPSOUT_DRIVEBUS             (1 << 2)
>  #define AXP_MISC_CTRL                        0x8f
> diff --git a/include/axp818.h b/include/axp818.h
> index 8ac517a2bf..08ac35d15f 100644
> --- a/include/axp818.h
> +++ b/include/axp818.h
> @@ -61,7 +61,6 @@
>  #ifdef CONFIG_AXP818_POWER
>  #define AXP_POWER_STATUS             0x00
>  #define AXP_POWER_STATUS_ALDO_IN             BIT(0)
> -#define AXP_POWER_STATUS_VBUS_PRESENT                BIT(5)
>  #define AXP_VBUS_IPSOUT                      0x30
>  #define AXP_VBUS_IPSOUT_DRIVEBUS             (1 << 2)
>  #define AXP_MISC_CTRL                        0x8f

Reply via email to