[PATCH 08/42] imx: imx8_cpu: support get temperature for i.MX9

[Peng Fan (OSS)]

From: Peng Fan <peng....@nxp.com>

Use CONFIG_DM_THERMAL to make the temperature function could be reused
by i.MX8 and i.MX9

Signed-off-by: Peng Fan <peng....@nxp.com>
---
 drivers/cpu/imx8_cpu.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/cpu/imx8_cpu.c b/drivers/cpu/imx8_cpu.c
index 2d3df419f1c..4da7a99bf30 100644
--- a/drivers/cpu/imx8_cpu.c
+++ b/drivers/cpu/imx8_cpu.c
@@ -89,15 +89,19 @@ static void set_core_data(struct udevice *dev)
        }
 }
 
-#if IS_ENABLED(CONFIG_IMX_SCU_THERMAL)
+#if IS_ENABLED(CONFIG_DM_THERMAL)
 static int cpu_imx_get_temp(struct cpu_imx_plat *plat)
 {
        struct udevice *thermal_dev;
        int cpu_tmp, ret;
        int idx = 1; /* use "cpu-thermal0" device */
 
-       if (plat->cpu_rsrc == SC_R_A72)
-               idx = 2; /* use "cpu-thermal1" device */
+       if (IS_ENABLED(CONFIG_IMX8)) {
+               if (plat->cpu_rsrc == SC_R_A72)
+                       idx = 2; /* use "cpu-thermal1" device */
+       } else {
+               idx = 1;
+       }
 
        ret = uclass_get_device(UCLASS_THERMAL, idx, &thermal_dev);
        if (!ret) {
@@ -128,7 +132,7 @@ static int cpu_imx_get_desc(const struct udevice *dev, char 
*buf, int size)
        ret = snprintf(buf, size, "NXP i.MX%s Rev%s %s at %u MHz",
                       plat->type, plat->rev, plat->name, plat->freq_mhz);
 
-       if (IS_ENABLED(CONFIG_IMX_SCU_THERMAL)) {
+       if (IS_ENABLED(CONFIG_DM_THERMAL)) {
                temp = cpu_imx_get_temp(plat);
                buf = buf + ret;
                size = size - ret;
-- 
2.40.0