From: Thomas Mittelstaedt <thomas.mittelsta...@de.bosch.com> U-Boot at VirtualBox must load Linux and boot configuration from disk devices. Here the discs at AHCI (scsi) bus are used to load the need boot data.
Signed-off-by: Thomas Mittelstaedt <thomas.mittelsta...@de.bosch.com> --- configs/efi-x86_payload64_defconfig | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig index 5cde04a5ac..30a7f31dac 100644 --- a/configs/efi-x86_payload64_defconfig +++ b/configs/efi-x86_payload64_defconfig @@ -7,11 +7,11 @@ CONFIG_VENDOR_EFI=y CONFIG_TARGET_EFI_PAYLOAD=y CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y +CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -22,7 +22,6 @@ CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y # CONFIG_CMD_NFS is not set @@ -37,6 +36,9 @@ CONFIG_MAC_PARTITION=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_INTERFACE="scsi" +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" -- 2.30.2
