On Tue, May 2, 2023 at 2:45 PM Tim Harvey <thar...@gateworks.com> wrote: > > Add GPIO name lookup so that you can act on GPIO's by name vs controller > id: > > Before: > u-boot=> gpio input pci_wdis# > GPIO: 'pci_wdis#' not found > Command 'gpio' failed: Error -22 > > After: > u-boot=> gpio input pci_wdis# > gpio: pin pci_wdis# (gpio 103) value is 1 > > Signed-off-by: Tim Harvey <thar...@gateworks.com>
Reviewed-by: Fabio Estevam <feste...@denx.de>
