To avoid piling up all the various Kconfig symbols in one place, i.e.
common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ .
This commit moves SPL_USB_HOST and updates help text of both USB_HOST
and SPL_USB_HOST .
Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: Andrew Davis <a...@ti.com>
Cc: Chris Packham <judge.pack...@gmail.com>
Cc: Jim Liu <jim.t90...@gmail.com>
Cc: Lukasz Majewski <lu...@denx.de>
Cc: Samuel Holland <sam...@sholland.org>
Cc: Simon Glass <s...@chromium.org>
Cc: Stefan Roese <s...@denx.de>
Cc: Tom Rini <tr...@konsulko.com>
Cc: Weijie Gao <weijie....@mediatek.com>
---
common/spl/Kconfig | 10 ----------
drivers/usb/host/Kconfig | 13 +++++++++++++
2 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 2c042ad3066..03d0fd90e09 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1345,16 +1345,6 @@ config SPL_THERMAL
automatic power-off when the temperature gets too high or low. Other
devices may be discrete but connected on a suitable bus.
-config SPL_USB_HOST
- bool "Support USB host drivers"
- help
- Enable access to USB (Universal Serial Bus) host devices so that
- SPL can load U-Boot from a connected USB peripheral, such as a USB
- flash stick. While USB takes a little longer to start up than most
- buses, it is very flexible since many different types of storage
- device can be attached. This option enables the drivers in
- drivers/usb/host as part of an SPL build.
-
config SPL_USB_STORAGE
bool "Support loading from USB"
depends on SPL_USB_HOST
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 6213b3c95fa..1a883babf4c 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -6,6 +6,19 @@ comment "USB Host Controller Drivers"
config USB_HOST
bool
select DM_USB
+ help
+ Enable access to USB (Universal Serial Bus) host devices so that
+ SPL can load U-Boot from a connected USB peripheral, such as a USB
+ flash stick. While USB takes a little longer to start up than most
+ buses, it is very flexible since many different types of storage
+ device can be attached.
+
+config SPL_USB_HOST
+ bool "Support USB host drivers"
+ depends on SPL
+ help
+ For detailed help see USB_HOST Kconfig symbol. This option enables
+ the drivers in drivers/usb/host as part of an SPL build.
config USB_XHCI_HCD
bool "xHCI HCD (USB 3.0) support"
--
2.39.2
