FriendlyARM NanoPi R5S is an open-sourced mini IoT gateway device.

Board Specifications
- Rockchip RK3568
- 2 or 4GB LPDDR4X
- 8GB or 16GB eMMC, SD card slot
- GbE LAN (Native)
- 2x 2.5G LAN (PCIe)
- M.2 Connector
- HDMI 2.0, MIPI DSI/CSI
- 2xUSB 3.0 Host
- USB Type C PD, 5V/9V/12V
- GPIO: 12-pin 0.5mm FPC connector

The device tree is taken from kernel v6.4-rc1.

Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Signed-off-by: Tianling Shen <cns...@gmail.com>
---

Changes since v2:
* https://lore.kernel.org/u-boot/20230529045954.21689-1-cns...@gmail.com/
* Added more supported emmc modes and pinctrl to sdhci node
* Collected Reviewed-by tag
* Removed sdmmc node
* Removed unused configs, reordered
* Switched to use bootph-all for uart
* Huge thanks to Jonas for suggestions

Changes since v1:
* https://lore.kernel.org/u-boot/20230528094017.2949-1-cns...@gmail.com/
* No changes

---
 arch/arm/dts/Makefile                      |   1 +
 arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi |  31 ++
 arch/arm/dts/rk3568-nanopi-r5s.dts         | 136 +++++
 arch/arm/dts/rk3568-nanopi-r5s.dtsi        | 590 +++++++++++++++++++++
 board/rockchip/evb_rk3568/MAINTAINERS      |   8 +
 configs/nanopi-r5s-rk3568_defconfig        |  85 +++
 6 files changed, 851 insertions(+)
 create mode 100644 arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dts
 create mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dtsi
 create mode 100644 configs/nanopi-r5s-rk3568_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 480269fa60..e2eda3ffcb 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -169,6 +169,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \
        rk3566-anbernic-rgxx3.dtb \
        rk3566-radxa-cm3-io.dtb \
        rk3568-evb.dtb \
+       rk3568-nanopi-r5s.dtb \
        rk3568-rock-3a.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RK3588) += \
diff --git a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi 
b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
new file mode 100644
index 0000000000..0ecca85b20
--- /dev/null
+++ b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cns...@gmail.com>
+ */
+
+#include "rk356x-u-boot.dtsi"
+
+/ {
+       chosen {
+               stdout-path = &uart2;
+               u-boot,spl-boot-order = "same-as-spl", &sdmmc0, &sdhci;
+       };
+};
+
+&sdhci {
+       cap-mmc-highspeed;
+       mmc-ddr-1_8v;
+       mmc-hs200-1_8v;
+       mmc-hs400-1_8v;
+       mmc-hs400-enhanced-strobe;
+       pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+};
+
+&uart2 {
+       clock-frequency = <24000000>;
+       bootph-all;
+       status = "okay";
+};
diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dts 
b/arch/arm/dts/rk3568-nanopi-r5s.dts
new file mode 100644
index 0000000000..b6ad8328c7
--- /dev/null
+++ b/arch/arm/dts/rk3568-nanopi-r5s.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cns...@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3568-nanopi-r5s.dtsi"
+
+/ {
+       model = "FriendlyElec NanoPi R5S";
+       compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
+
+       aliases {
+               ethernet0 = &gmac0;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, 
<&wan_led_pin>;
+
+               led-lan1 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_LAN;
+                       function-enumerator = <1>;
+                       gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+               };
+
+               led-lan2 {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_LAN;
+                       function-enumerator = <2>;
+                       gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
+               };
+
+               power_led: led-power {
+                       color = <LED_COLOR_ID_RED>;
+                       function = LED_FUNCTION_POWER;
+                       linux,default-trigger = "heartbeat";
+                       gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+               };
+
+               led-wan {
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_WAN;
+                       gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&gmac0 {
+       assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+       assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru 
CLK_MAC0_2TOP>;
+       assigned-clock-rates = <0>, <125000000>;
+       clock_in_out = "output";
+       phy-handle = <&rgmii_phy0>;
+       phy-mode = "rgmii";
+       pinctrl-names = "default";
+       pinctrl-0 = <&gmac0_miim
+                    &gmac0_tx_bus2
+                    &gmac0_rx_bus2
+                    &gmac0_rgmii_clk
+                    &gmac0_rgmii_bus>;
+       snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+       snps,reset-active-low;
+       /* Reset time is 15ms, 50ms for rtl8211f */
+       snps,reset-delays-us = <0 15000 50000>;
+       tx_delay = <0x3c>;
+       rx_delay = <0x2f>;
+       status = "okay";
+};
+
+&mdio0 {
+       rgmii_phy0: ethernet-phy@1 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+               pinctrl-0 = <&eth_phy0_reset_pin>;
+               pinctrl-names = "default";
+       };
+};
+
+&pcie2x1 {
+       num-lanes = <1>;
+       reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&pcie30phy {
+       data-lanes = <1 2>;
+       status = "okay";
+};
+
+&pcie3x1 {
+       num-lanes = <1>;
+       reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+       vpcie3v3-supply = <&vcc3v3_pcie>;
+       status = "okay";
+};
+
+&pcie3x2 {
+       num-lanes = <1>;
+       num-ib-windows = <8>;
+       num-ob-windows = <8>;
+       reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+       vpcie3v3-supply = <&vcc3v3_pcie>;
+       status = "okay";
+};
+
+&pinctrl {
+       gmac0 {
+               eth_phy0_reset_pin: eth-phy0-reset-pin {
+                       rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       gpio-leds {
+               lan1_led_pin: lan1-led-pin {
+                       rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               lan2_led_pin: lan2-led-pin {
+                       rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               power_led_pin: power-led-pin {
+                       rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               wan_led_pin: wan-led-pin {
+                       rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dtsi 
b/arch/arm/dts/rk3568-nanopi-r5s.dtsi
new file mode 100644
index 0000000000..58ba328ea7
--- /dev/null
+++ b/arch/arm/dts/rk3568-nanopi-r5s.dtsi
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cns...@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+       aliases {
+               mmc0 = &sdmmc0;
+               mmc1 = &sdhci;
+       };
+
+       chosen: chosen {
+               stdout-path = "serial2:1500000n8";
+       };
+
+       hdmi-con {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
+       vdd_usbc: vdd-usbc-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vdd_usbc";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
+       vcc3v3_sys: vcc3v3-sys-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3_sys";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&vdd_usbc>;
+       };
+
+       vcc5v0_sys: vcc5v0-sys-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc5v0_sys";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&vdd_usbc>;
+       };
+
+       vcc3v3_pcie: vcc3v3-pcie-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3_pcie";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               enable-active-high;
+               gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+               startup-delay-us = <200000>;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       vcc5v0_usb: vcc5v0-usb-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc5v0_usb";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&vdd_usbc>;
+       };
+
+       vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vcc5v0_usb_host_en>;
+               regulator-name = "vcc5v0_usb_host";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&vcc5v0_usb>;
+       };
+
+       vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vcc5v0_usb_otg_en>;
+               regulator-name = "vcc5v0_usb_otg";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&vcc5v0_usb>;
+       };
+
+       pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "pcie30_avdd0v9";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <900000>;
+               regulator-max-microvolt = <900000>;
+               vin-supply = <&vcc3v3_sys>;
+       };
+
+       pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "pcie30_avdd1v8";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&vcc3v3_sys>;
+       };
+};
+
+&combphy0 {
+       status = "okay";
+};
+
+&combphy1 {
+       status = "okay";
+};
+
+&combphy2 {
+       status = "okay";
+};
+
+&cpu0 {
+       cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+       cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+       cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+       cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+       mali-supply = <&vdd_gpu>;
+       status = "okay";
+};
+
+&hdmi {
+       avdd-0v9-supply = <&vdda0v9_image>;
+       avdd-1v8-supply = <&vcca1v8_image>;
+       status = "okay";
+};
+
+&hdmi_in {
+       hdmi_in_vp0: endpoint {
+               remote-endpoint = <&vp0_out_hdmi>;
+       };
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
+&hdmi_sound {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+
+       vdd_cpu: regulator@1c {
+               compatible = "tcs,tcs4525";
+               reg = <0x1c>;
+               fcs,suspend-voltage-selector = <1>;
+               regulator-name = "vdd_cpu";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <800000>;
+               regulator-max-microvolt = <1150000>;
+               regulator-ramp-delay = <2300>;
+               vin-supply = <&vcc5v0_sys>;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+
+       rk809: pmic@20 {
+               compatible = "rockchip,rk809";
+               reg = <0x20>;
+               interrupt-parent = <&gpio0>;
+               interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+               #clock-cells = <1>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pmic_int>;
+               rockchip,system-power-controller;
+               vcc1-supply = <&vcc3v3_sys>;
+               vcc2-supply = <&vcc3v3_sys>;
+               vcc3-supply = <&vcc3v3_sys>;
+               vcc4-supply = <&vcc3v3_sys>;
+               vcc5-supply = <&vcc3v3_sys>;
+               vcc6-supply = <&vcc3v3_sys>;
+               vcc7-supply = <&vcc3v3_sys>;
+               vcc8-supply = <&vcc3v3_sys>;
+               vcc9-supply = <&vcc3v3_sys>;
+               wakeup-source;
+
+               regulators {
+                       vdd_logic: DCDC_REG1 {
+                               regulator-name = "vdd_logic";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-init-microvolt = <900000>;
+                               regulator-initial-mode = <0x2>;
+                               regulator-min-microvolt = <500000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-ramp-delay = <6001>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vdd_gpu: DCDC_REG2 {
+                               regulator-name = "vdd_gpu";
+                               regulator-always-on;
+                               regulator-init-microvolt = <900000>;
+                               regulator-initial-mode = <0x2>;
+                               regulator-min-microvolt = <500000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-ramp-delay = <6001>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcc_ddr: DCDC_REG3 {
+                               regulator-name = "vcc_ddr";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-initial-mode = <0x2>;
+
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                               };
+                       };
+
+                       vdd_npu: DCDC_REG4 {
+                               regulator-name = "vdd_npu";
+                               regulator-init-microvolt = <900000>;
+                               regulator-initial-mode = <0x2>;
+                               regulator-min-microvolt = <500000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-ramp-delay = <6001>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcc_1v8: DCDC_REG5 {
+                               regulator-name = "vcc_1v8";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vdda0v9_image: LDO_REG1 {
+                               regulator-name = "vdda0v9_image";
+                               regulator-min-microvolt = <950000>;
+                               regulator-max-microvolt = <950000>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vdda_0v9: LDO_REG2 {
+                               regulator-name = "vdda_0v9";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <900000>;
+                               regulator-max-microvolt = <900000>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vdda0v9_pmu: LDO_REG3 {
+                               regulator-name = "vdda0v9_pmu";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <900000>;
+                               regulator-max-microvolt = <900000>;
+
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                                       regulator-suspend-microvolt = <900000>;
+                               };
+                       };
+
+                       vccio_acodec: LDO_REG4 {
+                               regulator-name = "vccio_acodec";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vccio_sd: LDO_REG5 {
+                               regulator-name = "vccio_sd";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcc3v3_pmu: LDO_REG6 {
+                               regulator-name = "vcc3v3_pmu";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                                       regulator-suspend-microvolt = <3300000>;
+                               };
+                       };
+
+                       vcca_1v8: LDO_REG7 {
+                               regulator-name = "vcca_1v8";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcca1v8_pmu: LDO_REG8 {
+                               regulator-name = "vcca1v8_pmu";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                                       regulator-suspend-microvolt = <1800000>;
+                               };
+                       };
+
+                       vcca1v8_image: LDO_REG9 {
+                               regulator-name = "vcca1v8_image";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcc_3v3: SWITCH_REG1 {
+                               regulator-name = "vcc_3v3";
+                               regulator-always-on;
+                               regulator-boot-on;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcc3v3_sd: SWITCH_REG2 {
+                               regulator-name = "vcc3v3_sd";
+                               regulator-always-on;
+                               regulator-boot-on;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+               };
+
+       };
+};
+
+&i2c5 {
+       status = "okay";
+
+       hym8563: rtc@51 {
+               compatible = "haoyu,hym8563";
+               reg = <0x51>;
+               interrupt-parent = <&gpio0>;
+               interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+               #clock-cells = <0>;
+               clock-output-names = "rtcic_32kout";
+               pinctrl-names = "default";
+               pinctrl-0 = <&hym8563_int>;
+               wakeup-source;
+       };
+};
+
+&i2s0_8ch {
+       status = "okay";
+};
+
+&pcie30phy {
+       data-lanes = <1 2>;
+       status = "okay";
+};
+
+&pinctrl {
+       hym8563 {
+               hym8563_int: hym8563-int {
+                       rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       pmic {
+               pmic_int: pmic-int {
+                       rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       usb {
+               vcc5v0_usb_host_en: vcc5v0-usb-host-en {
+                       rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+                       rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
+&pmu_io_domains {
+       pmuio1-supply = <&vcc3v3_pmu>;
+       pmuio2-supply = <&vcc3v3_pmu>;
+       vccio1-supply = <&vccio_acodec>;
+       vccio3-supply = <&vccio_sd>;
+       vccio4-supply = <&vcc_1v8>;
+       vccio5-supply = <&vcc_3v3>;
+       vccio6-supply = <&vcc_1v8>;
+       vccio7-supply = <&vcc_3v3>;
+       status = "okay";
+};
+
+&saradc {
+       vref-supply = <&vcca_1v8>;
+       status = "okay";
+};
+
+&sdhci {
+       bus-width = <8>;
+       max-frequency = <200000000>;
+       non-removable;
+       pinctrl-names = "default";
+       pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+       status = "okay";
+};
+
+&sdmmc0 {
+       max-frequency = <150000000>;
+       no-sdio;
+       no-mmc;
+       bus-width = <4>;
+       cap-mmc-highspeed;
+       cap-sd-highspeed;
+       disable-wp;
+       vmmc-supply = <&vcc3v3_sd>;
+       vqmmc-supply = <&vccio_sd>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+       status = "okay";
+};
+
+&tsadc {
+       rockchip,hw-tshut-mode = <1>;
+       rockchip,hw-tshut-polarity = <0>;
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&usb_host0_ehci {
+       status = "okay";
+};
+
+&usb_host0_ohci {
+       status = "okay";
+};
+
+&usb_host0_xhci {
+       extcon = <&usb2phy0>;
+       dr_mode = "host";
+       status = "okay";
+};
+
+&usb_host1_ehci {
+       status = "okay";
+};
+
+&usb_host1_ohci {
+       status = "okay";
+};
+
+&usb_host1_xhci {
+       status = "okay";
+};
+
+&usb2phy0 {
+       status = "okay";
+};
+
+&usb2phy0_host {
+       phy-supply = <&vcc5v0_usb_host>;
+       status = "okay";
+};
+
+&usb2phy0_otg {
+       status = "okay";
+};
+
+&usb2phy1 {
+       status = "okay";
+};
+
+&usb2phy1_host {
+       phy-supply = <&vcc5v0_usb_otg>;
+       status = "okay";
+};
+
+&usb2phy1_otg {
+       status = "okay";
+};
+
+&vop {
+       assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+       assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+       status = "okay";
+};
+
+&vop_mmu {
+       status = "okay";
+};
+
+&vp0 {
+       vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+               reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+               remote-endpoint = <&hdmi_in_vp0>;
+       };
+};
diff --git a/board/rockchip/evb_rk3568/MAINTAINERS 
b/board/rockchip/evb_rk3568/MAINTAINERS
index 6b2e7c7575..9222682461 100644
--- a/board/rockchip/evb_rk3568/MAINTAINERS
+++ b/board/rockchip/evb_rk3568/MAINTAINERS
@@ -7,6 +7,14 @@ F:      configs/evb-rk3568_defconfig
 F:     arch/arm/dts/rk3568-evb-boot.dtsi
 F:     arch/arm/dts/rk3568-evb.dts
 
+NANOPI-R5S
+M:      Tianling Shen <cns...@gmail.com>
+S:      Maintained
+F:      configs/nanopi-r5s-rk3568_defconfig
+F:      arch/arm/dts/rk3568-nanopi-r5s.dts
+F:      arch/arm/dts/rk3568-nanopi-r5s.dtsi
+F:      arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
+
 RADXA-CM3
 M:     Jagan Teki <ja...@amarulasolutions.com>
 S:     Maintained
diff --git a/configs/nanopi-r5s-rk3568_defconfig 
b/configs/nanopi-r5s-rk3568_defconfig
new file mode 100644
index 0000000000..0a298c65a7
--- /dev/null
+++ b/configs/nanopi-r5s-rk3568_defconfig
@@ -0,0 +1,85 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_TEXT_BASE=0x00a00000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
+CONFIG_DEFAULT_DEVICE_TREE="rk3568-nanopi-r5s"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_TARGET_EVB_RK3568=y
+CONFIG_SPL_STACK=0x400000
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5s.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x4000000
+CONFIG_SPL_BSS_MAX_SIZE=0x4000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names 
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_WARN=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_ERRNO_STR=y
-- 
2.40.1

Reply via email to