[PATCH 12/14] net: sh_eth: Drop reset GPIO handling in favor of common code

[Marek Vasut]

The common code is now capable of handling reset GPIO associated
with PHY. Drop the local ad-hoc code in favor of common code.

Signed-off-by: Marek Vasut <marek.vasut+rene...@mailbox.org>
---
Cc: Geert Uytterhoeven <geert+rene...@glider.be>
Cc: Joe Hershberger <joe.hershber...@ni.com>
Cc: Michal Simek <michal.si...@amd.com>
Cc: Nishanth Menon <n...@ti.com>
Cc: Ramon Fried <rfried....@gmail.com>
---
 drivers/net/Kconfig  |  1 +
 drivers/net/sh_eth.c | 17 -----------------
 2 files changed, 1 insertion(+), 17 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 48f9efcc94f..7d482cb7745 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -695,6 +695,7 @@ config SUN8I_EMAC
 config SH_ETHER
        bool "Renesas SH Ethernet MAC"
        select PHYLIB
+       select PHY_ETHERNET_ID
        help
          This driver supports the Ethernet for Renesas SH and ARM SoCs.
 
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 14f7fd1bcc0..95042daade0 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -530,7 +530,6 @@ struct sh_ether_priv {
        struct mii_dev          *bus;
        phys_addr_t             iobase;
        struct clk              clk;
-       struct gpio_desc        reset_gpio;
 };
 
 static int sh_ether_send(struct udevice *dev, void *packet, int len)
@@ -650,7 +649,6 @@ static int sh_ether_probe(struct udevice *udev)
        struct eth_pdata *pdata = dev_get_plat(udev);
        struct sh_ether_priv *priv = dev_get_priv(udev);
        struct sh_eth_dev *eth = &priv->shdev;
-       struct ofnode_phandle_args phandle_args;
        struct mii_dev *mdiodev;
        int ret;
 
@@ -661,18 +659,6 @@ static int sh_ether_probe(struct udevice *udev)
        if (ret < 0)
                return ret;
 #endif
-
-       ret = dev_read_phandle_with_args(udev, "phy-handle", NULL, 0, 0, 
&phandle_args);
-       if (!ret) {
-               gpio_request_by_name_nodev(phandle_args.node, "reset-gpios", 0,
-                                          &priv->reset_gpio, GPIOD_IS_OUT);
-       }
-
-       if (!dm_gpio_is_valid(&priv->reset_gpio)) {
-               gpio_request_by_name(udev, "reset-gpios", 0, &priv->reset_gpio,
-                                    GPIOD_IS_OUT);
-       }
-
        mdiodev = mdio_alloc();
        if (!mdiodev) {
                ret = -ENOMEM;
@@ -735,9 +721,6 @@ static int sh_ether_remove(struct udevice *udev)
        mdio_unregister(priv->bus);
        mdio_free(priv->bus);
 
-       if (dm_gpio_is_valid(&priv->reset_gpio))
-               dm_gpio_free(udev, &priv->reset_gpio);
-
        return 0;
 }
 
-- 
2.39.2